Best Cnc Waterjet Cutter

Aquatic Custom Tile Porcelain Swimming Pool Starfish Mosaic ( 5"- Cobalt Blue) (Pack of 3)

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

• Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
• Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
• 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
• CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....

Fiber Cutter Stable Performance High Automatic Blade Return Lightweight Fiber Cutter (Orange)

• Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
• High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
• Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do term use..
• Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
• Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..

Fiber Cutter, Fiber Cleaver Aluminum Alloy Tungsten Steel ABS Unbreakable Portable High Accuracy for Net Installation

• Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
• Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
• Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
• High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
• Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

• Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
• High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
• Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
• High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
• Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.

Fiber Cleaver, Aluminum Alloy, Tungsten Steel, ABS, Stable Performance, Fiber Cutter, High, Low Error, Light Weight for Maintenance (Black)

• High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
• Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
• Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
• Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
• Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..

Fiber Cleaver, Aluminum Alloy, Tungsten Steel, ABS, Stable Performance, Fiber Cutter, High, Low Error, Light Weight for Maintenance (Orange)

• High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
• Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
• Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
• Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
• Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..

ZCEN Mini Pipe Tubing Cutter for Copper Pipe, Stainless Steel Tubing, Metal, Plastic, Brass

• The main body of the pipe cutter is made of lightweight and durable aluminum castings, and the blades are made of CNC machining with most durable alloy steel..
• Rotate the knob to clamp the tube, Revolve the tube cutter around the pipe, and tighten the clamp steadily after each turn until it is completely cut..
• Designed for tight spaces, the height of 2 inches allows you to use it in cramped spaces on small diameter pipes..
• Used for cutting copper, brass, aluminum, thin steel, and PVC pipes with an outer diameter of 1/8 to 1-1/8 inches (3-28 mm). It's even used as a brake wire cutter or exhaust pipe cutter..
• If you have any quality issues with your Tube Cutter, please feel free to contact customer service for troubleshooting help, replacement, or refund..

2021 PowerPlasma 102i 100 Amp plasma cutter with CNC Package

• Comes With Blow Back iPTM-100 CNC machine plasma torch.
• IGBT Infineon Modules / Inverter technology.
• 100AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor).
• Up to 1 1/8″ clean cut with CNC (edge start).
• Pierce up to 5/8″-3/4″ with auto THC.

Fiber Optic Cutter, Thickened Slide Rail 3 in 1 Clamp Fiber Cable Cutting Tool with Hex Wrench for Electrical Repair

• STABLE SLIDE RAIL: Using thickened slide rail, which has high rigidity, and the automatic knife return is and not stuck, which is convenient to use..
• EFFICIENT CUTTING: The average cutting angle is less than 0.5 degrees, and the 16 sides cutting end face design ensures stable cutting, efficient and reliable..
• 3 IN 1 CLAMP: This fiber cutter has 3 in 1 clamp design, which can cut 0.9mm pigtail slot, 0.25mm bare fiber slot and 2.5‑3.0mm insulated wire slot..
• CNC MACHINING: Manufactured by CNC machining equipment, the fiber cutter has high accuracy and small operating error, with a wide application range..
• TUNGSTEN STEEL: The cutting blade is made of tungsten steel, with high hardness, wear resistance and corrosion resistance, has a long service life..

TAIWAIN 1/2 Inch Shank Router Bit Set Woodworking Cutter 3PCS Ogee Raised Panel Joinery Router Bits, Wood Miter Carbide CNC Cutting Tool (F-Finger)

• ◆ Basic Information-- 1/2" shanks and Premium C3 micro-grain tungsten carbide blades, Create rail and stile cabinet door frames for a sharper & longer lasting edge. Router bit cutter material is YG6 Solid Hardened Steel..
• "◆ Exquisite Design--Solid hardened steel bodies with Anti-Kickback Design, Use on CNC and other automatic table-mounted portable routers.You can complete your work accurately, and satisfy your pursuit of exquisite DIY while you use it easily. ".
• ▲ Professional Cutter-- Simple and efficient styling helper, carbide milling cutter, double-edged, straight shank, integral hardened steel body with anti-backlash design, can be used on CNC and other automatic desktop portable portable planers..
• "◆ Wide Work--The router bits works great with all kinds of materials and surfaces, like woods, mdf, particle boards, plywood, panels, softwood, hardwood and many others. which is truly versatile for your extra convenience. perfect for woodworking. ".
• ◆ Exact Use--Enhance your hardwood working performances and create beautifully handmade furniture on your own. Great for kitchen and bathroom doors, office cabinets, flooring tables, bedroom shelves, walls and more..

Loreso Mini Copper Pipe Tubing Cutter - Mini Tube Cutter for Copper Brass Aluminum, Thin Stainless Steel for 1/8 to 1 1/8 (3-28mm) OD Pipes)

• MINI TUBING AND PIPE CUTTER – Manufactured with high-quality, heavy duty alloy steel, this tube cutter will efficiently cut copper, brass, aluminum and thin steel pipes. This pipe cutter provides a fast, economical way to do a clean cut..
• VERSATILE PIPE CUTTER FOR ALL INDUSTRIES – This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops.
• EASY TO OPERATE – Cut like a BOSS with Loreso manual pipe cutter, Rotate the knob to grip tube, Revolve tube cutter around the pipe, Tighten grip smoothly after each full circle until full cut..
• VARIOUS TUBE CUTS – Cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8 to 1 1/8 Inch ( 3-28mm ) Outer Diameter OD..
• STURDY ALUMINUM CAST FRAME – Tube Cutter body is made of light weight and durable Aluminum Casting, Blade is built using CNC machining with most durable and high quality Alloy Steel..

FTVOGUE Milling Cutter HSS Straight Shank T‑Slot Cutter Woodruff Keyseat Milling Cutters 4x16x10mm,Milling Cutter

• The cutter is widely used for milling steel, aluminum, copper and iron.
• Using high‑speed steel material, the product is very durable.
• Woodruff key seat cutter can facilitate CNC processing and improve work efficiency.
• The product possess straight handle, easy to use, very practical.
• T‑slot cutter with stable structure, excellent performance and long service life.