Best Cobalt End Mills - TopShopReview.com

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Suitable for general-purpose machining on steel, chromium-nickel steel, and cast iron.
Four flutes produce a better finish than fewer flutes.
Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Square nose end mills (also called square end) create sharp, unrounded cuts.

fewer flutes have more chip-carrying capacity and more flutes produce a finer finish.
Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Square nose end mills (also called square end) create sharp, unrounded cuts.
Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

Corner rounding end mills are designed to take the edge off sharp corners.
Four flutes produce a better finish than fewer flutes.
Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Non-center-cutting design supports peripheral milling and finishing.

5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20.
Hardened and ground For Bridgeport type milling machines.
Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8").
5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20.
For double and single end mills (single end mils only for sizes over 5/8").

APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.

Contains Kodiak Cutting Tools brand premium quality USA made ball nose solid carbide end mills.
4 flute ball nose end mills are center cutting and made from premium sub-micrograin carbide.
Stub length end mills for extra rigidity.
Fitted wood block stand included and each size comes in a marked plastic tube.
Contains 1pc of each diameter: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2.

【SPECIFICATIONS】End mills for aluminum with 1/8” shank, 1/8” cutting diameter, 7/16” cutting length and 1-1/2” total length, 2 flutes with flat top, 5 pieces included in the package..
【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
【WIDELY USED】These aluminum end mills suit for CNC routers, any brands of plunge routers with 1/8" collet..