Categories

Best Cobalt Multiple Pilot Counterbore

Akozon 5pcs M3-M8 Pilot Slotting Counterbore Mould End Mill Cutter Solid Slot Countersink End Mill Drill Bit

  • 【Main purpose】: Countersunk end mill is a specially manufactured tool, mainly used to cut holes that allow bolts or screw heads to be screwed into..
  • 【High precision】: The cutting hole and bottom hole of this tool have high alignment accuracy. Because of its high production efficiency, it is often used in the machining industry..
  • 【High-quality and durable】: The Pilot Counterbore End Mill Cutters is made of hard high-speed steel, with high toughness, wear resistance, and high hardness for high-speed cutting.
  • it is usually used for assembly on a milling machine..
  • 【More time-saving】: Countersunk cutters reduce the time to change tools, improve the efficiency of machine actuator movement and save manufacturing time..
  • 【Wide range of applications】: Counterbore bit set is suitable for milling of copper, aluminum, steel, cast iron, etc., and can be directly processed or finely processed to heat treatments..
Check Stock

3/8 Inch Cobalt Drill Bits(5Pcs), HPHOPE M35 HSS Metal Twist Drill Bits Set, Jobber Drill Bits Length and Straight Shank, Suitable for Drilling in Hard Metal, Stainless Steel, Cast Iron

  • M35 COBALT HIGH SPEED STEEL: 3/8" drill bits for metal made from M35 Cobalt High Speed Steel and contain 5% Cobalt, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses..
  • 135° SPLIT POINT: 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. Straight shank allows for firmly holding and accurate centering and makes drilling precise and faster..
  • FULLY GROUND PROCESS: Fully ground spiral groove design clears particles quickly, decreases friction and heat for faster drilling performance..
  • PROFESSIONAL & WIDELY USE: Perfectly Suitable for drilling holes as Stainless Steel, Copper, Cast Iron, Galvanized Pipe, Aluminum Alloy, Wood and Other Softer Metals. Not for Glass or Ceramic Materials..
  • EASY USE & STORAGE: The set includes 5Pcs 3/8" Cobalt Drill Bits, This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and DIY, household maintenance and repair..
Check Stock

Sabre Tools 5/16 Inch Cobalt Drill Bits – 5pcs Drill Bits for Metal, M35 Cobalt Metal Drill Bit Set, Pilot Point Tip – Heavy-Duty Drill Bits for Steel, Hard Metal, Cast Iron (5/16" x 4-1/2")

  • What You Get: This drill bit set for metal includes 5 – 5/16 Inch x 4-1/2 Inch bits of the same size..
  • A Must in Your Tool Box: This cobalt drill bit set is designed to surpass your expectations in terms of durability and performance, ensuring fast and easy penetration through hard metals..
  • Heavy-Duty Material: Our drill bits for hardened steel feature a heavy-duty construction made with M35 cobalt, which has excellent durability and superior resistance against abrasion and high heat..
  • Pilot Point Tip: These cobalt drill bits feature a pilot point tip that prevents slipping and can help increase drilling speed while ensuring smooth and easy penetration through hard metals..
  • Wide Range of Applications: Our cobalt drill bits for hardened steel are suitable for hard metals, stainless steel, cast iron, steel, titanium alloy, hard plastics and more, and a wide range of applications such as repair, construction, or woodworking..
Check Stock

8 Pack Woodworking Countersink Drill Bits Set 3in1 Heavy Duty M2 Pilot Drill Bits Depth Adjustable 82-Degree Chamfer 1/4” Hex Shank for #4#6#8#10#12#14 Screws in Soft & Hard Wood

  • 3in1 Countersink Drill Bit Set – Enable you to Drill, Countersink and Counterbore in one step, ideal woodworking tools for setting screws flush with....
  • Meet All Your Needs–8 pcs Countersink drill bits assortment in size 5/64”, 3/32”, 7/64”, 1/8” (x2), 9/64” (x2), 5/32” for perfect....
  • Easy To Use–3 sharp edged 82-degree chamfer design Counter sink bits built with 1/4" Hex Shanks with groove for quick size changes without bit....
  • Drilling Depth Adjustable–Extra Pilot bits included.
  • Working length of the pilot drill bit is adjustable for precise depth control.
  • Compatible with More Materials – Pilot bits are made of high quality M2 steel, countersink bits make of high carbon steel, able to drill in hard....
Check Stock

BOSCH SP515 5 Piece Hex Shank Countersink Drill Bit Set with #6 #8 #10 and #12

  • VERSATILITY: Bosch hex shank countersink bits feature adjustable depths and provide precise, clean pilot holes in wood, plastic and composite materials.
  • 3 in 1: Drill, Countersink and Counterbore in one step.
  • UNIVERSAL FIT: The Bosch SP515 countersink set fits all Bosch and competitive brands drill/drivers.
  • USE WITH: For use with Allen wrench (included in set).
  • the hex shanks fit 3/8 in. and 1/2 in. corded and cordless drills.
  • ACCESSORIES: Replaceable bits offered (sold separately).
Check Stock

Drill America - DEWPIL1/4X3/16 DEWCBR Series Qualtech High-Speed Steel Pilot for Counterbore, 3/16\ Shank Diameter, 1-3/4\ Length, 1/4\ Size (Pack of 1)

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Available in 1-3/4-inches overall length.
Check Stock

Drill Hulk 7-Piece M35 Cobalt Left Hand Drill Bit Set for Removing Damaged Bolts and Screws, 5/64-Inch, 7/64-Inch, 5/32-Inch, 1/4-Inch, 19/64-Inch

  • STUBBY MECHANICS LENGTH: 135 degree split point reduces drill walking, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for removing damaged bolts and screws, or drilling a pilot hole for a screw extractor.
  • INCLUDE: 2pcs 5/64 inch, 2pcs 7/64 inch, 1pc 5/32 inch, 1pc 1/4 inch and 1pc 19/64 inch cobalt left hand drill bits with case.
Check Stock

uxcell Knurled Insert Nuts, M8 x 10mm(L) x 10mm(OD) Female Thread Brass Embedment Assortment Kit, 5 Pcs

  • [SIZE] - M8x1.25mm thread size, 0.39" (10mm) long, 0.39" 10mm outer diameter ,OD tolerance: +0.02"/0"..
  • [MATERIAL] - Made of brass, rust resistance, good thermal conductivity and heat resistance, can ensure long time using..
  • [FEATURE] - Can be installed by ultrasonic or heat into thread tapered hole, or in during injection..
  • [ADVANTAGE] - No need to counterbore or countersink the boss hole since the insert has guide pilot..
  • [APPLICATION] - Widely used on injection for fastening..
Check Stock

Drill America DEWCBR Series Qualtech High-Speed Steel Counterbore, 1/2\ Shank Diameter, 3/16\ Pilot, 5-1/8\ Length, 5/8\ Size (Pack of 1)

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Counterboring is the enlargement of a portion of a hole that has previously been formed.
  • The counterbor is a two-piece construction, having an integral shank and counterbore-cutter, and a pilot that is interchangeable, which provides flexibility in the use of the tool.
Check Stock

Chicago-Latrobe 550 115 Piece Heavy-Duty Cobalt Steel Jobber Length Drill Bit Set, Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle

  • Manufactured to NAS 907 Type J geometry aerospace specifications with self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging and gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Heavy duty construction for increased strength and rigidity compared to standard drill bits.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
Check Stock

Bosch HSBIM9 General-Purpose 9 pc. Bi-Metal Hole Saw Kit

  • All-in-one kit – features two SpinLOCK Universal arbors, steel pilot bit and six hole saws with Progressor tooth design.
  • SpinLOCK universal arbor – fits all brands and sizes to simplify diameter changes with fast plug removal and tool-free install.
  • The pilot bit – designed to start holes in a variety of materials.
  • Progressor tooth design – hole saws feature alternating teeth size for performance, cutting faster and lasting longer in wood, metal and plastic materials.
  • Durable hole saw material – hole saws are made with 8% cobalt alloy.
Check Stock

Century Drill & Tool 26529 Pro Grade Cobalt Drill Set, 29 Piece, Made in The USA, for Stainless Steel and Hard Metal

  • Set includes 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64" and 1/2" cobalt drill bits.
  • Century Pro Grade drills are made from 5% industrial quality M35 cobalt alloy high speed steel..
  • Cobalt is extremely heat resistant, when used and operated in power units that have a RPM speed of 1,500 or more for maximum efficiency..
  • Lasts up to 12 times longer than the average consumer-grade high speed steel drill..
  • 135 degree quick-cut point penetrates faster and will not walk or wander at the starting surface. Does not require a center punch or pilot hole..
Check Stock

Hymnorq 3/8 Inch Fractional Size M35 Cobalt Steel Twist Drill Bit Set of 5pcs, Jobber Length and Straight Shank, Extremely Heat Resistant, Perfect Drilling in Stainless Steel and Cast Iron

  • COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, ideal for repeated drilling in metalworking..
  • FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • SELF CENTERING - The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks..
  • 5PC SET - The set includes 5pcs of 3/8” diameter M35 grade cobalt steel twist drill bits, packed in a convinient and reuseable PVC case for easy storage and carrying. Manufactured to German DIN338 standard..
  • DOWNLOADABLE USER GUIDE - We've summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers w....
Check Stock