uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit
- Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
- Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
- Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
- 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
- Tips: Recommended feed rate: general steel: 6-15m/min.
- cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check StockXEWEA 35-Pieces Screw & Bolt Extractor Set and Drill Bit Kit, Easy Out Broken Lug Nut Extraction Socket Set
- 35-PIECE Extractor/Drill Bit Set: 13pcs most commonly used multi-spline screw extractors,and 16pcs tough left hand cobalt drill bits,6pcs spiral screw extractors..
- HSS with Titanium Nitride Coating Drill Bit:135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
- Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
- CRMO Material Damaged Screw Extractor:Our screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16", 7/3....
Check Stockuxcell Machine Tap #6-32 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Milling Tap 5pcs
- Tap Size: 3/8"-16 BSW thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
- Material and Finish: M35 cobalt high-speed steel tool (5% Co) is with high hardness (up to around 67HRC) and toughness for wear resistance. Features just the base substrate without any additional coatings, great for wide ranges of applications..
- Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..
Check StockSTROTON Cobalt Drill Bit Set (1/16-1/4 Inch, 13PCS), M35 High Speed Steel Twist Drill Bits for Stainless Steel, Hard Metal, Cast Iron, Plastic and Wood
- 【Premium True 5% Cobalt Steel with 68 HRC】- The Marked Cobalt Content of Ordinary Drill Bits May be False, but This Drill Bits Set is Made of Cobalt Ore from Our Own Mine, Which Indeed Contains 5% Cobalt. Although the Cost and Price are Slightly Higher, It Usually is able to Provide 3X Heat,Wear and Chip Resistance and 3X Tool Life..
- 【Split Point Design and Fully Ground Process】- Compared with Other Ordinary Drill Bits, This Drill Bits Set is Particularly Suitable for Heavy Duty Work, Such as Cutting through Stainless Steel,Steel Plate,Iron Sheet, Cast Iron and Hardwood, and Drilling Out Bolts Studs and Screws..
- 【3X Efficiency + 3X Tool Life】- This Cobalt High Speed Steel Drill Bits Set is Typically Capable of Running 3 Times Faster. Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes..
- 【Sharp Drill Bit Edge】- This Kind of Drill Bits Beast Can Even Cut Hardened Metal into Long Iron Bars, While a Dull Drill Bit Can Just Slowly Wear Through Metal..
- 【13 Pieces Jobber Length Industrial Drill Bits Includes】:1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4 [DIA 1/64 Inch Increments].
Check StockHARFINGTON Tap & Bit Sets 1/4-32 UNEF 2B Straight Flute Machine Thread Milling Tap 5.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit
- Tap & Bit Sets: Tap size: thread size: 1/4-32 UNEF.
- total length: 68mm / 2.68". Drill bit size: cutting edge diameter: 5.5mm / 0.217".
- Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
- Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check Stockuxcell Tap & Bit Sets M11 x 1.5 H2 Straight Flute Machine Thread Milling Tap 9.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit
- Tap & Bit Sets: Tap size: thread size: M11 x 1.5.
- total length: 85mm / 3.35". Drill bit size: cutting edge diameter: 9.5mm / 0.374".
- Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
- Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check StockAKM Screw Extractor with Drill Bit Set,bolt extractors,Multi-spline Extractors,and Left Hand Drill Bits for Removeing Broken Studs, Bolts, Socket Screws, and Fittings| SAE
- 35-PIECE Extractor/Drill Bit Set: 13pcs most commonly used multi-spline screw extractors,and 16pcs tough left hand cobalt drill bits,6pcs spiral screw extractors..
- HSS with Titanium Nitride Coating Drill Bit:135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
- Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
- CRMO Material Damaged Screw Extractor:Our AKM screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16",....
Check StockDrill America - DWDCOFP12 F Cobalt Drill Bit (Pack of 12), DWDCO Series
- 13 pc Set High Speed Steel M42 Cobalt NAS 907J 135-Degree Split Point.
- 135-Degree split point for accurate centering and fast penetration.
- Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance.
Check Stockuxcell 5/16\-18 BSW Spiral Flute Thread Tap, Machine Threading Tap HSS-Cobalt Uncoated, Round Shank with Square End, H2 Tolerance
- Tap Size: 5/16"-18 BSW thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
- Material and Finish: M35 cobalt high-speed steel tool (5% Co) is with high hardness (up to around 67HRC) and toughness for wear resistance. Features just the base substrate without any additional coatings, great for wide ranges of applications..
- Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..
Check StockThread Forming Tap, Mbot, Co, TiN, 6-32, H6
- Modified bottoming tap can reach to the bottom of a blind hole to cut threads.
- Cobalt steel provides extended tool life compared to high-speed steel taps.
Check StockM35 5% Cobalt Metric Drill Bits Set (1mm-10mm/19pcs), Straight Shank Jobber Drill Bits, Metal HSS Twist Drill Bits for Stainless Steel Hard Metal and Cast Iron
- ✅【5% COBALT TWIST DRILL BITS SET】Made from M35 Cobalt Steel with Molybdenum and Cobalt added to form a hardened alloy, can measure up to 67 Rockwell hardness, cut faster, last longer, and last longer than normal HSS drill bits 12 times..
- ✅【19PCS METRIC DIRLL BITS SET】The set includes 19pcs of M35 cobalt steel twist drill bits: 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7 mm, 7.5mm, 8 mm, 8.5mm, 9 mm, 9.5mm, 10 mm. Organized in a sturdy plastic storage case for easy transport to your workplace..
- ✅【TWIST DESIGN AND PERFORMANCE】Precise 135° SPLIT Point, Gold Oxide Surface and Round Straight Shank. Prevents walking and removes chips and particles faster. Precision fully ground to ensure smooth chip movement..
- ✅【PROFESSIONAL AND WIDELY USED】M35 Cobalt High Speed Steel is more suitable for hardening materials. Ideal for cutting stainless steel, steel and cast iron as well as wood, aluminum alloys and other metals. Not suitable for glass or ceramic materials. Pay attention to speed, pressure and heat control when drilling..
- ✅【SERVICE】If you have any problem with our metric drill bit set or are not satisfied with the product, please feel free to contact WildBossy..
Check StockCobalt Drill Bit Set M35 High Speed Steel Twist Drill Bit Set for Hardened Metal Stainless Steel Cast Iron Woodwork Plastic (30 Pieces,1/8 Inch)
- Quality material: the cobalt drill bit set uses cobalt M35 high speed steel as material, this material is reliable and practical, with a long service use, heat and abrasion resistance.
- The cutting edge of drill bit is hardened and honed, with accurate cutting without shaking.
- Creative twist design: metal cobalt drills for hardened steel has 135 degrees split point tip and torsional design to improve cutting speed with self-centering ability.
- They can avoid walking during work process, while clearing chips and particles more quickly and easily.
- Nice features: the nice twist drill bits have precise diameter.
- M35 cobalt drill bits for hardened metal are not easy to break or wear out, so suitable for lithium electric drill, hand electric drill, impact electric drill, etc..
- The size is small, please pay attention to use.
- Various fitness: M35 high speed steel cobalt drill set is nicely suitable for hardened material and hard metals, such as cast iron, high temperature alloy, hard plastics, stainless steel, titanium alloy, woods, etc., also for soft materials.
- What you will get: the package contains many cobalt drill bits, sufficient quantity to meet your various needs.
- Please pay attention to speed, pressure and heat control during drilling.
Check StockCobalt Drill Bit Set M35 High Speed Steel Twist Drill Bit Set for Hardened Metal Stainless Steel Cast Iron Woodwork Plastic (15 Pieces,1/16 Inch)
- Quality material: the cobalt drill bit set uses cobalt M35 high speed steel as material, this material is durable, strong and practical, with a long service life, heat and abrasion resistance.
- The cutting edge of drill bit is hardened and honed, with accurate cutting without shaking.
- Creative twist design: metal cobalt drills for hardened steel has 135° split point tip and torsional design to improve cutting speed with self-centering ability.
- They can avoid walking during work process, while clearing chips and particles more quickly and easily.
- Nice features: the 1/16 inch twist drill bits have precise diameter.
- M35 cobalt drill bits for hardened metal are not easy to break or wear out, so suitable for lithium electric drill, hand electric drill, impact electric drill, etc..
- The size is small, please pay attention to use.
- Various fitness: M35 high speed steel cobalt drill set is greatly suitable for hardened material and hard metals, such as cast iron, high temperature alloy, hard plastics, stainless steel, titanium alloy, woods, etc., also for soft materials.
- What you will get: the package contains 15 pieces 1/16 inch cobalt drill bits, sufficient quantity to meet your various needs.
- Please pay attention to speed, pressure and heat control during drill....
Check Stock