Categories

Best Code Compliant

20 Amp Self-Test GFCI Nightlight Electrical Outlet, Tamper-Resistant Receptacle with Guidelight and LED Indicator, Ground Fault Circuit Interrupters w/ Wall Plate, UL Listed (1 Pack, Matte White)

  • Specifications: Electrical rating 15A/125V/1875W. Meets or exceeds UL943 2015 standards. Compliant with National Electric Code (NEC) requirements. ETL Listed..
  • Slim GFCI Outlet: New slim, modern design for easier and quicker installation in shallow electrical boxes..
  • GFI Outlets: Provides protection from electrical shocks that might occur from faulty appliances in damp locations. Device detects and trips on ground faults within 1/40 of a second.
  • Auto-Test 15 Amp GFCI Outlet: To ensure continuous protection against ground faults, the GFCI outlet conducts automatic self-tests. Install in your bathroom, kitchen, garage, and basement..
  • 10 pack. Each pack includes (1)15Amp white GFCI receptacle, (1) 4.59"x 2.76" white wall plate, (2) screws, installation manual, stickers, US-based customer support.
Check Stock

EATON Wiring VGFS15W-MSP 15-Amp 125-Volt Combination Ground Fault Circuit Interrupter with 20-Amp Rated Feed-Through Single-Pole Switch, White

  • Specifications: Electrical rating 20A/125V/2500W. Meets or exceeds UL943 2015 standards. Compliant with National Electric Code (NEC) requirements. ETL Listed..
  • Weather resistant: Faith WR GFCI's are made of UV-resistant materials deigned to withstand corrosion elements making it suitable areas subject to moisture, outdoor or indoor such as patios, kitchen or bathrooms..
  • Tamper-Resistant GFCI Outlet: Tamper-resistant shutter safety mechanism blocks access to power unless a plug is inserted, providing an extra layer of safety in households with children.
  • GFCI Outlets: Provides protection from electrical shocks that might occur from faulty appliances in damp locations. Device detects and trips on ground faults within 1/40 of a second.
  • Auto-Test 20 Amp GFCI Outlet: To ensure continuous protection against ground faults, the GFCI outlet conducts automatic self-tests. Install in your bathroom, kitchen, garage, and basement..
Check Stock

Faith [10-Pack] 20A GFCI Outlets, Tamper-Resistant GFI Duplex Receptacles with LED Indicator, Self-Test Ground Fault Circuit Interrupter with Wall Plate, ETL Listed, Ivory, 10 Piece

  • Specifications: Electrical rating 20A/125V/2500W. Meets or exceeds UL943 2015 standards. Compliant with National Electric Code (NEC) requirements. ETL Listed..
  • Tamper-Resistant, Slim GFCI Outlet: Tamper-resistant shutter safety mechanism blocks access to power unless a plug is inserted, providing an extra layer of safety in households with children.
  • GFI Outlets: Provides protection from electrical shocks that might occur from faulty appliances in damp locations. Device detects and trips on ground faults within 1/40 of a second.
  • Auto-Test 20 Amp GFCI Outlet: To ensure continuous protection against ground faults, the GFCI outlet conducts automatic self-tests. Install in your bathroom, kitchen, garage, and basement..
  • 10 pack. Each pack includes (1)20Amp ivory TR GFCI receptacle, (1) 4.59"x 2.76" ivory wall plate, (2) screws, installation manual, stickers, US-based customer support.
Check Stock

LeeKooLuu OBD2 Scanner Car Scan Diagnostic Tool Reset Clear Check Engine Code Reader for All OBD II Vehicles LK11

  • 【Auto OBDII Scanner Diagnostic Tool:】Easy-to-use plug-in-play car scanner that read and clear codes.Retrieves generic code and displays DTC definitions. It can check engine related fault codes,easily find out what caused..
  • 【Wide Compatibility:】Code readers & scan tools are compatible with all OBD II and CAN Compliant vehicles,passenger cars or light trucks,post 1996 in US,post 2000 for EU-based and Asian cars.Not compatible with new energy and hybrid vehicles..
  • 【Freeze Frame Date For Accurate Diagnosis:】Car code reader comes with viewing freeze frame function that enables you to retrieve data recorded in the ECU of the condition under which the fault occurs to figure out why the check engine light is on and cut down test drive verification time..
  • 【I/M Readiness Function:】 Car diagnostic scanner comes with I/M Readiness function to check the operations of the Emission System on OBD2 compliant vehicles.It includes vehicle-specific number of monitors like misfire monitor, fuel system monitor,Comprehensive component monitor, Oxygen sensor heater monitor,EVAP system and etc.It can help get your vehicle ready to pass the annual smog check..
  • 【Retrieve Vehicle Infor:】 Vehicle code reader enables retrieval of Vehicle Identification No. (VIN), ....
Check Stock

Holdrite QS-U Expansion Bracket Stainless Steel

  • SAFE: Straps secure water tank to wall and takes weight load off thermal pipes.
  • MATERIAL: Galvanized and Stainless Steel construction support heated water tanks.
  • SIZE: Supports 5-gallon hot water tanks up to 13 inches in diameter.
  • RATED: Heater is compliant with Uniform Plumbing Code and International Plumbing Code requirements.
Check Stock

Autel MS300 Universal OBD2 Scanner Car Code Reader, Turn Off Check Engine Light, Read & Erase Fault Codes, Check Emission Monitor Status CAN Vehicles Diagnostic Scan Tool

  • TURN OFF CHECK ENGINE LIGHT: MS300 check engine code reader can read, clear generic, manufacturer-specific and pending codes. It enables you to figure out why CEL is on like a pro and turn off check engine light instantly after proper repair..
  • MECHANIC APPROVED: MS300 OBD2 scanner works with most OBDII compliant(OBD2 protocols: KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM, and CAN) sedans, SUVs and light trucks post-1996 for US cars, post-2000 for EU-based and Asian cars..
  • DIAGNOSE IN SECONDS: MS300 auto code reader features easy to use 2 button design to read, clear DTCs to help home mechanics locate car problems fast. With an intuitive interface and easy-to-read backlit screen, this diagnostic code reader is easy to use..
  • SMOG CHECK: MS300 car code reader retrieves I/M Readiness status to check emission-related systems like misfire monitor, fuel system monitor, comprehensive components monitor, O2 sensors, EVAP to help your vehicle ready pass the annual smog check..
  • NO BATTERY NEEDED: MS300 OBDII scan tool communicates with vehicles through standard 16-PIN OBD2 cable and it’s powered by vehicle directly- no battery needed..
  • RETRIEVE VIN NUMBER: MS300 engine code readers can retrieve VIN (Vehicle Identification Number) on 2002 and newer vehicle....
Check Stock

TYPAR DrainableWrap 5 ft. x 100 ft.

  • Multidirectional flow - Install in any direction without affecting performance..
  • Code-compliant - Exceeds minimum AC38 Code requirement for Drainage Efficiency as per ASTM E2273.
  • Drains significantly faster than most conventional house wraps, per ASTM E2273 testing.
  • One-of-a-kind - It's drainable. It's TYPAR. And it's part of our lifetime limited system warranty coverage..
  • Install TYPAR DrainableWrap along with our complete system of Flashings and Construction Tape and get the backing of a lifetime limited warranty..
Check Stock

Autel MS309 Universal OBD2 Scanner Engine Fault Reader, Read Clear Codes, View Freeze Frame Data, I/M Readiness Smog Check CAN Diagnostic Scan Tool

  • ...e parameters such as RPM, vehicle speed, mass airflow, engine load, fuel pressure, short/long term fuel trim, engine coolant temperature and etc..
  • READINESS STATUS TO PASS SMOG CHECK: The Autel MS309 car diagnostic scanner tool comes with I/M Readiness function to check the operations of the Emission System on OBD2 compliant vehicles. It includes vehicle-specific number of monitors like misfire monitor, fuel system monitor, comprehensive components monitor, O2 sensors, EVAP system and etc, making this OBD2 scan tool an excellent scan tool to help get your vehicle ready to pass the annual smog check..
  • UNMATCHED COMPATIBILITY: Autel MS309 compact pocket code reader supports all OBD2 protocols: KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM and CAN. This OBD2 code scanner is compatible with all OBDII-Compliant vehicles, passenger cars or light trucks, post 1996 in US, post 2000 for EU-based and Asian cars..
  • RETRIEVE VEHICLE INFO: The Autel MS309 automotive OBD2 scanner enables retrieval of the Vehicle Identification No. (VIN), Calibration ID(s), Calibration Verification Nos. (CVNs). This function is most useful to check whether the ECU matches your car when you are buying a used car. The MS309 auto car scanner comes with LIFETIME FREE software updates ....
Check Stock

Safety 1st Outlet Cover with Cord Shortener, 4-Pack

  • UL Extra Duty Compliant (for Wet Locations, National Electrical Code 406.9 (B)(1)) with a patented multi-configuration design, NEC Compliant, UL File No. E362580.
  • Gang can be used horizontally or vertically, with up to 18 configurations, wheter GFCI, Duplex, Switch, or Round.
  • Durable polycarbonate construction, Lockable and easy to install, includes gasket and mounting hardware, fits full size padlock..
  • 3-1/4" deep, Clear/Gray. Single Gang Outdoor Outlet bubble cover.
  • Cross Reference: MM410C + MM710C / 30919 / 30920 / WIUC10FRED.
Check Stock

Panasonic FV-1115VQL1 WhisperCeiling DC Ventilation Fan with Light, 110-130-150 CFM , White

  • Pick-A-Flow Speed Selector: Select desired airflow from 110, 130, 150 CFM.
  • Revolutionary ECM motor with SmartFlow technology for optimum CFM output.
  • Flex-Z Fast bracket provides flexible, fast & trouble-free installation, even from below the ceiling.
  • Long Life: High-quality components and permanently lubricated motors for long life.
  • Code Compliant: ENERGY STAR rated and ASHRAE 62.2 compliant.
Check Stock

Autophix ES610 Obd2 Scanner Code Reader Auto Diagnostic Tool for Volvo Vehicles

  • ...ial functions, please kindly confirm with us about the compatibility before purchasing..
  • The ES610 is able to quick access to Volvo most control systems problems, including engine, transmission, ABS, air conditioning, additional heater etc. It can also reset the service indicator..
  • OBD II function for all OBD II/EOBD compliant vehicles: read code, erase code, I/M readiness, data stream, freeze frame, O2 sensor test, vehicle information..
  • Works on most OBD II compliant US, European and Asian vehicles and supports all OBD2 protocols: CAN, J1850 PWM, J1850 VPW..
  • ES610 is available for C30(2007-2013)，C70 Conv(1998-2005)，C70 Coupe(1998-2002)，C70(2006-2013)，S40(1996-2012)，S40(1996--2012)，S60(2001-2019)，S60(2019-)，S60L(2019-)，S70(1997-2000)，S80(1999-2016)，S90(2017-2019)，S90L(2018-2019)，V40(1996-2004)，V40(2013-2018)，V50(2004-2012)，V60(2011-2019)，V60(2019-)，V70 XC(1997-2000)，V70 XC/XC70(1997-2007)，V70 XC/XC70(2001-2007)，V70(1997-2016)，V90 Cross Country(2017-2019)，V90(2017-2019)，XC40(2018-2019)，XC60(2009-2019)，XC70(2008-2016)，XC90(2003-2019).
Check Stock

simplehuman 25 Liter / 6.6 Gallon Slim Open Commercial Trash Can Brushed Stainless Steel

  • GREAT FOR HOTELS AND OFFICES - Slim, space-efficient shape fits well in hotels and offices or wherever space is limited..
  • DURABLE, EASY-TO-CLEAN MATERIALS - Durable stainless steel construction and easy-to-clean plastic inner buckets..
  • FINGERPRINT-PROOF - Fingerprint-proof finish resists smudges to keep stainless steel shiny..
  • CUSTOM FIT LINERS - Code F liners are designed to fit this can perfectly and are extra strong to prevent leaks and tears..
Check Stock

Autel MaxiScan MS300 OBD2 Scanner Professional Enhanced OBDII Diagnostic Code Reader Tool

  • MS300 OBD2 scanner works with most OBDII compliant(OBD2 protocols: KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM, and CAN) sedans, SUVs and light trucks post-1996 for US cars, post-2000 for EU-based and Asian cars..
  • DIAGNOSE IN SECONDS: MS300 auto code reader features easy to use 2 button design to read, clear DTCs to help home mechanics locate car problems fast. With an intuitive interface and easy-to-read backlit screen, this diagnostic code reader is easy to use..
  • MS300 car code reader retrieves I/M Readiness status to check emission-related systems like misfire monitor, fuel system monitor, comprehensive components monitor, O2 sensors, EVAP to help your vehicle ready pass the annual smog check..
  • NO BATTERY NEEDED: MS300 OBDII scan tool communicates with vehicles through standard 16-PIN OBD2 cable and it’s powered by vehicle directly- no battery needed. Please follow the correct usage order: Engine off- Plug MS300 in- Turn Ignition On..
  • RETRIEVE VIN NUMBER: MS300 engine code readers can retrieve VIN (Vehicle Identification Number) on 2002 and newer vehicles supporting Mode 9 for quick vehicle identification and cut time spent locating the cause why the check engine light is on..
Check Stock