Categories

Best Coipacks For 3 Vortec

M48 Magnum Spear With Vortec Sheath

  • Aluminum shaft with glass-fiber-filled nylon handle.
Check Stock

Speedway Motors Chrome 1987-Up Small Block Fits Chevy Centerbolt Valve Covers, 1-Hole

  • For 1987-up heads and Vortec style SBC heads.
  • 1-hole per cover with separate oil fill and PCV holes.
  • Holes are 1 1/4" with baffles. Grommets are NOT included.
Check Stock

Rod and Main Bearings with Piston Rings compatible with 1967-95 CHEVY SBC 350 5.7 L

  • Does not fit Vortec ENGINE Pistons with metric ring lands.
Check Stock

A-Team Performance – Marine Distributor Crab Style – Compatible with Mercruiser Volvo Penta 18-5351 Vortec V-8 884794A02 5.0L/ 5.7L/ 6.2L MPI

  • Compatible with Mercruiser Volvo Penta 18-5351 Vortec V-8 884794A02 5.0L/ 5.7L/ 6.2L MPI.
  • Reliable high signal strength trigger system.
  • Ball bearing and bushing combination provide maximum timing stability and long life. Aluminum housing construction.
  • Compatible with flat tappet or hydraulic roller cams Fits Vortec V-8 2001 and up 5.0L/ 5.7L/ 6.2L MPI EnginesReplaces Mercruiser 884794A02, Mallory 9-26751.
Check Stock

Remflex 2049 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Reflex's unique flexible graphite material has been proven for more than 30 years.
  • Chevy V8 - 4.8L, 5.3L, 5.7L- LS1, LS6 /6.0L- LS1, LS2 Vortec, 1-3/4" Round Port, For Headers, 2/Set.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex Exhaust Gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

GM 2001-2011 4.8 & 5.3 re-ring rebuild set

  • Includes Full gaskets, Gallery Valve, New Rings (Top Chrome) New Bearings (OE Style).
  • Fits 2001-2011 GM 4.8 & 5.3 Truck Vortec Engines.
  • Fits these VINS from 2001: P,T,Z,B,M,3,0,J,4,C,V..........If you have other needs feel free to send us a message with your vehicle VIN..
  • All orders will be sent STD parts unless buyer specifies other sizes when ordering..
Check Stock

Rebuilt OEM Connecting Rod compatible with 1999-2010 LS Vortec 5.3L & 6.0L and 1997-05 5.7L LS1 LS6 Casting #143

  • LS & Vortec rods with press fit pins. Not for Floating Pins..
Check Stock

MOSTPLUS Ignition Distributor Compatible with Chevrolet GMC Vortec V8 5.0L 5.7L 7.4L 93441558

  • [ Interchagne Part Number ] — 12570425, 93441558 , 01104079, 01104051, 01104058, CZ20008,841829,84-1829,DST1829..
  • [ Application ] — Compatible with Chevrolet GMC Vortec V8 5.0L 5.7L 7.4L.
  • [ Including ] — Complete unit including ignition module, cap, and rotor.Installation instruction is included..
  • [ Warm Tips ] — Please check with the fitment chart or Part number for the right compatibility before purchase.
Check Stock

Ignition Distributor Set Brass Terminals Distributor Cap and Rotor Kit compatible with Chevrolet GMC Cadillac Vortec V8 5.0l 5.7l 7.4l Compatible Part Number DR474 DR331

  • Distributors cap and rotor kit features brass inserts and stainless steel rotor springs,designed to provide the best possible fit to ensure maximum conductivity between the distributor towers and spark plug wires,prevents arc through and crossfire..
  • Engineered specifically compatible with General Motors Vortec V8 engines,specifically compatible with General Motors Vortec V8 engines,Offering the quality,reliability,durability..
  • Direct replacement ready to install,including the cap and rotor kits.Fuel mileage and acceleration better than OE part..
  • Recommended replacement part compatible with GM vehicle's original factory component,Fits standard and automatic transmissions..
  • Cap and rotor kits reference part number: 1104079,93441558,1104051,1104058..
Check Stock

Ls Wiring Harness-HPI 97-06 LS1 Standalone Wire Harness 4.8 5.3 6.0 VORTEC Standalone Wiring Harness with 4L60E Compatible with DBC LS1 4.8 5.3 6.0 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006

  • ❤️Applicable: This independent wiring harness is suitable for vortec 4.8, 5.3, 6.0 engines 1997-2006, with mechanical throttle body and 4l60e....
  • ❤️ Stable operation: This independent wiring harness has undergone 100% quality inspection before leaving the factory to ensure high reliability.....
  • ❤️Anti-leakage: This independent wiring harness allows the PCM to be installed under the vehicle dashboard and has a slip ring seal, which has a....
  • ❤️Plug and play: This independent harness is fully plug and play, with switching power supply, constant power supply and ground connection..
  • ❤️Main effect: This independent wiring harness designed for Vortec 1997-2006 can be retrofitted to older muscle cars and street light poles or....
Check Stock

Brian Tooley Racing BTR Truck Stage 3 Includes Cam, Beehive Springs, Pushrods, Michigan Motorsports Seals Fits Silverado Sierra Vortec 4.8 5.3 6.0 6.2

  • Brian Tooley Racing BTR Stage 3 Truck Cam, Beehive Springs, Michigan Motorsports Seals, 7.400" Chromoly Pushrods 4.8 5.3 6.0.
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 3 Truck Cam, Beehive Springs, Set of VS LS Hat Seals, 7.400 Chromoly Pushrods.
  • Stage III Camshaft Specs Specs: 218/224 .553/.553 110+0 Requires a 3 bolt timing gear..
  • STAGE 3 SPECIFICS: The Stage 3 V2 camshaft is an amazing all around grind for the truck enthusiast. You sacrifice some low end torque in the pursuit of more power higher in the RPM range, but gain an idle note that is distinctly BTR! Stage 3 grind, it is still a tow-friendly camshaft, just not ideal for the everyday hauler. An aftermarket converter is highly recommended with this grind.Excellent for 4.8 5.3 6.0 6.2 Silverado, Sierra, Yukon, Tahoe, Suburban, Escalade.
  • Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance..
Check Stock

FITCENT Replacement Armband Strap Compatible with OTF, OTF Burn, Orange Theory Fitness, OT Beat Heart Rate Monitor Band… (1)

  • Replacement Strap For OTF /OTBeat / OT Burn /Wahoo/Powr Lab/FITCENT/LIVLOV/XOSS/Vortec and more Waterproof Armband Heart Rate Monitor..
  • FITCENT Wrist Band perfectly compatible with Fitbit Versa 3, Fitbit Sense.
  • The upgraded material adopts unique craftsmanship to make it softer, comfortable, breathable, adjustable, and can be washed..
  • FITCENT armband replacement width is 20 mm, length is 400mm. Wearing size between 7.5''-13''(19-33cm)..
  • Updated quick-lock interconnected armband design to keep the Heart Rate Sensor securely attached to your arm during swimming, cycling, running, and other intense workouts..
Check Stock

Trico 25-180 Force Beam Wiper Blade 18\

  • Robust superstructure for durable all-weather performance.
  • VorTec aerofoil converts wind force for maximum windshield contact.
  • SWIFT Easy Connection adaptor technology makes it simple to install.
  • HighGlide treated rubber element for a smoother, quieter wipe.
  • Patented swept-wing spoiler for high wind speeds and tested in test track environment to ensure optimal performance for all vehicle speeds.
Check Stock