Categories

Best Cold Drawn Or Rolled

Precision Brand 17SY25 Brass Shim Stock, 6″ x 25″ Flat Sheets, 260 Alloy Brass, 0.025″ (Pack of 2)

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • Especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

Precision Brand 17SY15 Brass Shim Stock, 6″ x 25″ Flat Sheets, 260 Alloy Brass, 0.015″ (Pack of 2)

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • Especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

Precision Brand 17SX3 Brass Shim Stock, 6″ x 60″ Roll, 260 Alloy Brass, 0.003″

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Especially useful for pilot production runs where material accuracy and economy are important.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
Check Stock

Precision Brand 17S10 Brass Shim Stock, 6″ x 100″ Roll, 260 Alloy Brass, 0.01″

  • Made from a half hard, cold rolled, 260 alloy brass.
  • Precision Brand's brass shim is "Branded" with everything the user needs to know clearly marked right on the material: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • Measures 150mm wide x 2.5m long by 0.05mm thick.
Check Stock

Precision Brand 17SX1X Brass Shim Stock, 6″ x 60″ Roll, 260 Alloy Brass, 0.0015″

  • Contains 1 each of the following thicknesses: 0.001″, 0.0015″, 0.002″, 0.003″, 0.004″, 0.005″, 0.006″, 0.007″, 0.008″, 0.010″, 0.012″, and 0.015″.
  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

1-1/2 C360 BRASS ROUND ROD 6\ long +.07\/-0 Solid 1.50\ Diameter H02 Lathe Bar Stock

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Especially useful for pilot production runs where material accuracy and economy are important.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
Check Stock

Permaspan PSC-2X 2 Gallon Potable Water Expansion Tank

  • Designed to meet the requirements of, and are listed by the National Sanitation Foundation (NSF) under ANSI/NSF Std 62.
  • The Butyl diaphragm has seamless construction and is designed to flex rather than stretch and crease like bladder tanks.
  • The polypropylene liner for the water reservoir will not flake, chip, crack or peel and does not impart taste and odor to the water.
  • Diaphragm, liner isolate water from contact with deep drawn steel domed shell - twice as strong as rolled steel shell of same thickness.
  • A high gloss enamel finish protects tank from the elements.
  • Pre-charged to 25psi: please refer to product manual for proper pre-charge setting.
Check Stock

Precision Brand 17SN6 Brass Shim Stock, 6″ x 18″ Flat Sheets, 260 Alloy Brass, 0.006″ (Pack of 10)

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

Precision Brand 17SN9 Brass Shim Stock, 6″ x 18″ Flat Sheets, 260 Alloy Brass, 0.009″ (Pack of 10)

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

260 Brass Shim Stock, Unpolished (Mill) Finish, H02 Temper, ASTM B19/ASTM B36, 0.50mm Thickness, 150mm Width, 2.5 m Length

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • Especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

260 Brass Sheet Unpolished Mill Finish Half Hard Temper 0.001-0.015 Thickness 6 Width 12 Length Pack of 12

  • Assortment of 6" wide by 12" long sheets contains 1 each of the following thicknesses: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", and 0.015".
  • Made from a half hard, cold rolled, 260 alloy brass.
  • 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015".
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
Check Stock

260 Brass Shim Stock, Unpolished (Mill) Finish, H02 Temper, ASTM B19/ASTM B36, 0.40mm Thickness, 150mm Width, 2.5 m Length

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

260 Brass Shim Stock, Unpolished (Mill) Finish, H02 Temper, ASTM B19/ASTM B36, 0.80mm Thickness, 150mm Width, 2.5 m Length

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock