Categories

Best Cold Extrusion

10Sets Black 2020 Series Aluminum Profile Connector Set, 10pcs Corner Bracket, 20pcs T Nuts and Hex Screw Bolt for Slot 6mm 20S Aluminum Rail Accessories

  • Used on 20mm x 20mm, 10 series (1” x 1“ ) extrusion profile, Package content: 10pcs 20mm 90 degree solid cast aluminum corner bracket, 20pcs carbon steel galvanized M5 T-slot nuts, 20pcs black M5x8mm hex socket cap screw bolt..
  • 2020 series aluminum profile connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects..
  • Aluminum corner bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 series aluminum profile extrusion..
  • Carbon steel hex socket button head bolts screws nuts surface chrome finish Anti-corrosion,rustless,non-pollution..
  • T-Slot aluminum extrusion M5x8mm hardware slide in T-Nuts made from high quality carbon steel galvanized..
Check Stock

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • EXTRUSION SYSTEM: Gradient mixing type with high-speed energy saving design, extrusion blow moulding machine gradually changed screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2..
  • DIE HEAD: Head mode of plastic toy extrustion blow molding machine, the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation..
  • HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
  • ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage s....
Check Stock

3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black

  • Compatible Models: This Extruder Motor kit is compatible with Creality 3D printers Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/CR-10/CR-10S and etc..
  • All-metal Extruder -- Stronger extrusion force with stable performance.
  • metal extruder with high quality aluminum alloy has stronger extrusion force,....
  • Smoothly and precisely -- The extrusion gear with high density is closely matched with U-shaped bearing. The even extrusion forces avoids the slippage....
  • High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which....
  • Low noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step..
Check Stock

BIGTREETECH Filament Runout Sensor Smart Filament Detector 1.75 mm Filament Break Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board

  • ❤【Auto Filament Runout Sensor】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament..
  • ❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH..
  • ❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament..
  • ❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board..
  • ❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer..
Check Stock

UniTak3D Ender 3 Direct Drive Upgrade Kit Conversion Bracket Compatible with Creality Ender 3 V2,Ender 3 Pro and Voxelab Aquila 3D Printer Dual Gear Extruder&Bowden Extruder

  • 【Application】:The direct drive upgrade kit is suitable for Ender 3 V2,Ender 3 Pro,Ender 3,Voxelab Aquila 3D printers,NOT compatible with Ender 3 Max,Ender 3 Neo,Ender 3 V2 Neo,NOT compatible with TITAN extruder..
  • 【Outstanding Extrusion Control】:A direct drive extruder improves extrusion and retraction by removing the need for the Bowden (PTFE) tube. It provides precise retraction and a better print result..
  • 【Stable Operation】:The holes of the Split Type conversion bracket are perfectly aligned, with supports on both sides to keep the center of gravity in the middle, and the structure is more stable..
  • 【Flexible Filament Supported】: Compared with bowden extrusion,this direct drive extrusion greatly improves print quality of TPU and other flexible materials..
  • 【Easy Installation】:No X,Y or Z-axis build volume lost. No firmware or wiring modification.Just tear down the original Ender 3 series plate and mount this direct drive upgrade kit..
Check Stock

Iverntech MGN12 300mm Linear Rail Guide with MGN12H Stainless Steel Carriage Block for Ender 3, Corexy, Tronxy, Delta Kossel 3D Printers Upgrades and CNC Machine

  • Package Includes: 22pcs 20mm corner brackets, 44pcs M5x10mm T-slot nuts, 44pcs M5x10mm flanged button head socket cap screws bolts, 50pcs flat washers and 50pcs lock washers..
  • 2020 Aluminum Corner Bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 Series Aluminum Profile Extrusion..
  • The angle bracket is used to reinforce right-angle corner joints of aluminum extrusion profiles, insert the two ends of the bracket into the groove of the profile, and tighten the screw to fix the two profiles..
  • T-Slot Aluminum Extrusion M5x10mm Hardware Slide In T-Nuts made from high quality carbon steel, surface is plated with nickel for good rust resistance and better performance high hardness and a long service life..
  • 304 stainless steel M5x10mm button head socket cap screws features anti-corrosion, rustless, high-hardnes. M5 flat washers and lock washers can be used to adjust the length..
Check Stock

Wallpaper Smoothing Tool Kit, Adhesive Wallpaper Install Tool Kit Include 2 Scrapers,Craft Knife with 5 Replacement Blades for Adhesive Contact Paper and Wallpaper Paste Applications

  • [WALLPAPER SMOOTHING TOOL KIT]DURABLE MATERIAL: The scraper is made of durable plastic material and the craft knife is made of alloy steel with 5 alloy steel blades. Very easy to use..
  • [WALLPAPER SMOOTHING TOOL KIT]SIZE: The blue scraper is 5.1inchX 3.14inch, and the red scraper is 7.67inchX 4.3inch.Precision cutting process knife.
  • 5 additional blades can be replaced when the knife becomes dull..
  • [WALLPAPER SMOOTHING TOOL KIT]ERGONOMIC DESIGNS: Blue extrusion tool with black felt design, large size red extrusion tool for human hand engineering design, very time and energy saving, very suitable for novice installers and professionals..
  • [WALLPAPER SMOOTHING TOOL KIT]MULTIPLE USES: The red extrusion tool is perfect for large area applications, and the blue extrusion tool is suitable for applying seams, corners and edges to wallpaper, effectively smoothing wrinkles and bubbles to make the most of your wallpaper. Craft knife With replaceable 5 blade craft cutter, suitable for your different DIY home projects..
  • [WALLPAPER SMOOTHING TOOL KIT]APPLICASION OCCASIONS: Wallpaper Smoothing Tool Kit is ideal for any home project, suitable for a variety of Wallpaper applications, vinyl stickers and glass films to make your project easier..
Check Stock

1set V Type Black AM8 3D Printer Aluminum Extrusion Metal Frame Full Set with Rubber Foot, Nuts Screw Bracket Corner for Anet A8 Upgrade (V type)

  • V Type is a generic 2020 rail and can compatible with Normal 2020 Extrusion hardware and accessories. The only difference is the V Type slot angle which allows for adding V-Wheels.
  • AM8 3d printer aluminum extrusion frame kit- Pre-tapped.
  • Package: please check the product description as the following.
Check Stock

2 Pack Ice Packs for Injuries Reusable Hot Cold Gel Pack Cold Pack for Injuries, Pain Relief, Rehabilitation, Flexible Therapy for Breast Surgery, Neck Strain, Knee, Lower Back, migraine

  • ...ery from sprains, hip replacement surgery, migraine, tendonitis or hysterectomy. And hot therapy helps with circulation. It is best used for muscle or joint stiffness, cramps, headache and neck pain..
  • Soft Cold Packs: The Ice packs only 2 sides, will not scratch delicate skin, even for children, the bag film is 7 co-extrusion PE film, very soft and pliable. For example, they will still bend after freezing, at least enough to make a semi-circle around your forehead. As cold pack for headaches, cold pack for ribs..
  • Perfect Replacement Gel Packs: The reusable gel cold pack has good flexibility and can withstand the expansion of the volume to double its own volume after heating, High safety coefficient of gel, not easy to break, long service life. Can be used with a lot of cloth covers, such as: B078SQLLZ1 perfect replacement ice packs for them..
Check Stock

BIQU H2 Extruder, V2.0 New Upgraded Dual Gear Extruder, Smooth Not Easy to Block 3D Printer Direct Extruder 1.75mm Filament for BIQU B1, Ender & CR Series Printers, CR-10S Pro

  • ...Gear: using bimetallic tube (copper alloy + GRADE5 titanium alloy), high temperature resistance, durability, high precision, and higher surface finish. The output gear modulus design was changed from 0.5 to 0.25, reducing the gear outer diameter, effectively solving the weak points of V1.0 gear jamming and unsmooth extrusion..
  • ✔️All-in-one Design & High Precision: The short-range extruder integrates the hot end of the nozzle, extruder, stepping motor, cooling fan, etc., double-gear extrusion, fast extrusion of consumables, short-range extrusion, short thread, and accuracy High, the control of the feeding amount is more accurate than remote extrusion, the withdrawal is more accurate, and the printing quality is better..
  • ✔️Extremely Smooth & Reducing Clogging: The smoothness of the throat and the inner wall of the nozzle reaches Ra0.4, which can effectively prevent clogging. H2 V2.0 adopts high-quality titanium-copper alloy hose, which has better heat dissipation and high temperature resistance, and the printing temperature can be as high as 400°C. It is the best quality hose material on the market. The hose is easy to disassemble, making it easier to use. convenient..
  • ✔️Lightweight & Compact & Powerful: BIQU H2 extruder weighs only 219 grams....
Check Stock

DURAMIC 3D PLA Glow in The Dark Filament 1.75mm Glow Green, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.05 mm, 1kg Spool

  • ...ect, we recommend you to expose your print to full sunlight or UV light for a period of time..
  • CONSISTENT & STABLE PRINTING - Duramic 3D promises no tangling, no popping and no clogging issues due to its rigid manufacturing quality control. Give us a chance to prove we’re your future go-to filament with its smooth extrusion and consistent printing performance. Recommended Extrusion/Nozzle Temperature 220±10C ..
  • SMOOTH & STABLE PRINTING - Duramic 3D promises no tangles, no bubbles and no clogs due to its rigid manufacturing quality control. Give us a chance to prove we’re your future go-to filament with its smooth extrusion and stable printing performance. Recommended Extrusion/Nozzle Temperature 220±10C ..
  • USER-FRIENDLY & COMPATIBLE - Universal compatibility with diverse FDM 3D printers in market. User-friendly with length scale and weight scale to monitor remaining length and weight easily. Eco-friendly and odor-free..
Check Stock

R.Vivimos Women's Long Sleeve Floral Print Retro V Neck Tassel Bohemian Midi Dresses (Large, Green)

  • Material: 60% Cotton Blend Very Soft Material.
  • Beautiful Bohemian Midi Dresses with a Deep V-neck and Front Tie at Neckline.
  • Flowy Printed Dress with Long Sleeves, Suitable for: Daily , Vacation, Beach etc..
  • Please Refer to the Product Description for Detailed Size Information Below Before Ordering.
  • Hand Wash Cold Recommended. Do not tumble dry! The clothes may have wrinkles after a long time transport extrusion. It is recommended to use a steam ironing machine to iron before trying on!.
Check Stock

10PCS V Slot 2020 Aluminum Extrusion European Standard 1220mm(48’’) Length Anodized Linear Rail for CNC DIY 3D Printer and Industrial Bracket Making

  • 【Packaged】10 pcs/packs black 2020 V slot aluminum extrusion .European standard aluminum profile size: length 1220mm(48’’) X 20mm(0.8’’) Width X 20mm(0.8’’) height..
  • 【Material】Made of premium aluminum alloy material,high-strength anodized linear rail with better hardness and toughness..
  • 【Advantages】With excellent spraying and excellent chemical polishing，smooth surface without burrs on the edges.
  • rust and corrosion resistance,neat cut. In addition,the aluminum extrusion packaged with protective film to prevent scratches during transportation..
  • 【Widely Application】Not only use for professional 3d printer project,also apply for making DIY bookshelves, tables, kitchen brackets, furniture, shelf, equipment protection fence etc..
  • 【5 Stars Customer Services】Any problems about the our aluminum profile extrusion ,our professional team will help you solve it soon when you contact us..
Check Stock