MAGICRIG 3-Side Cold Shoe Mount Adapter Camera Hot Shoe Bracket for Flash Light, LED Video Light, Microphone, Monitor Mount
- 【Triple Cold Shoe Mounts】The multifunctional shoe mount is a special camera phone accessory for vlog dv video shooting..
- 【Compatibility】This shoe bracket is connected by hot shoe mount or 1/4"-20 screw. This shoe mount allows the same time use of multiple shoe rack accessories, such as microphones, flash lights, led video lights or monitors..
- 【Multiple Mounting Points】In addition to three cold shoe mount and two 1/4" threaded holes, this cold shoe mounts features two ARRI-style mounts for mounting additional accessories..
- 【Swivel Damping】The knurled knob is equipped with a rubber patch to protect your shoe rack accessories from being scratched..
- 【Sturdy & Lightweight】Lightweight design with only 60g. Made of all aluminum alloy material, strong and durable..
Check Stock
StarTech.com 8U Wall Mount Patch Panel Bracket - 13.75 inch Deep - 19\ Patch Panel Rack & 1U Server Rack Shelf - Universal Vented Rack Mount Cantilever Tray, Black (CABSHELFV1U)
- Product 1: 8U WALL MOUNT RACK: This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 14 in [35 cm], recommended for networking equipment up to 12in deep, leaving 2in for cable routing.
- Product 1: EASY TO INSTALL: The 8U wall mounting patch panel bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts for easier equipment installation, to save you the hassle of sourcing separate mounting hardware.
- Product 1: COLD-ROLLED STEEL CONSTRUCTION: The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution & includes wall mounting hardware.
- Installs onto 16" studs with mounting holes.
- Product 1: EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room, wiring closet, classroom.
- Product 2: UNIVERSAL 19'' FIT: This 1U vented server rack mount shelf is designed to fit virtually any 19in server rack and can accommodate an internal depth of 10in (25cm) for your data, IT, networking, or other non-rack mount equipment.
- Product 2: MAXIMIZE VENTILIATION: The vented shelf plate on th....
Check StockV7 RMWC9UV450-1N Rack Mount Wall Cabinet Enclosure 9U Vented
- Fully assembled, locking cabinet with vented door and sides to keep equipment cool.
- Fully adjustable mounting rails and numbered U positions, with square holes for easy equipment mounting.
- Optional available casters can be installed for the option of rolling on the floor or under desks for versatility.
- Removable top and bottom cable panels for a streamlined appearance.
- High-grade, cold-rolled steel cabinet with 5 year.Package Contents:9U Rack Wall Mount Vented Enclosure,Set of Keys for Doors and Sides,10 x Screws and Cage Nuts for Device Mounting,6 x Wall Mounting Hardware M8.
Check StockSevenOak SKGHC20 Aluminum Cage & Top Handle/Shoe Mount/15mm Rods
- Camera Cage compatible with Panasonic GH4, GH5, and GH5S cameras.
- Protect your camera and add mounting points for accessories.
- Use with other components from the Tiltaing collection of products. Compatible with Tilta Type I Side Handles..
- Available in Tilta Gray or Black finishes..
- Provides several 1/4″-20 and 3/8″-16 mounting points as well as two cold shoe mounting points.
Check StockLimoStudio 7.75 inch Straight Camera Flash Bracket 1/4\-20 Screw Cold Shoe Mount for Video Lights, Microphone, Monitor and Camera Accessories, AGG2317
- ✔ It has two sliding 1/4"-20 mounting screws that allow you to ensure optimal placement of both your camera and flash..
- ✔ The camera mounting screw has a 3" adjustable rail..
- ✔ The additional cold shoe itself is detachable. Cold shoe mount for a microphone, flashes, video light, etc..
Check StockIkan STR-GH5 Stratus Complete Cage for Panasonic GH4 & GH5, Black
- A great kit to get started doing pro video with your Panasonic GH5.
- Panasonic GH Series cage, quick release top handle, Tilta Hand Strap, Arca and Manfrotto quick release baseplates, a 15mm LWS baseplate for mounting accessories (as well as a single 15mm rod mounting clamp), an HDMI male to HDMI female cable, and HDMI Clamp.
- The cage provides several 1/4?-20 and 3/8?-16 mounting points as well as two cold shoe mounting points.
- Protect your camera and add tools that are needed for pro video work.
- Compatible with other Tiltaing accessories.
Check StockTiltaing Half Camera Cage Compatible with Sony a7S III Camera - Tilta Gray
- Half-Cage protective armor compatible with the Sony a7S III camera suitable for use by video professionals.
- Add 1/4”-20 mounting points as well as two cold shoe mounting points for expansion.
- Made to work with other accessories in the "Tiltaing" series of products.
- Aluminum Alloy, Stainless Steel construction. Available in Tilta Gray.
- A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply....
Check Stock
StarTech.com 4U Wall Mount Network Rack - 14 Inch Deep (Low Profile) - 19\ Patch Panel Bracket for Shallow Server and IT Equipment, Network Switches - 44lbs/20kg Weight Capacity, Black (WALLMOUNT4)
- 4U WALL MOUNT RACK: This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 14 in [35 cm], recommended for networking equipment up to 12in deep, leaving 2in for cable routing.
- maximum weight capacity of 44 lbs [20kg].
- EASY TO INSTALL: The 4U wall mounting patch panel bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts for easier equipment installation, to save you the hassle of sourcing separate mounting hardware.
- COLD-ROLLED STEEL CONSTRUCTION: The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution & includes wall mounting hardware.
- Installs onto 16" studs with mounting holes.
- EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room, wiring closet, classroom.
Check StockDELTA FAUCET 1930-DST Contemporary Beverage Faucet Chrome
- Works with RO systems, filtered water systems, or as a cold water tap.
- Air gap included with 1/4 in. tube for RO system and 3/8 in. tube for drain.
- Mounting wrench to assist in tightening mounting nut securely.
Check StockCELESTION V-Type Guitar Speaker (T5906)
- L-type horizontal mounting bracket, you can install single-tube preamp, two tubes Preamp, three tubes Preamp..
- The surface of the bracket is spray-painted in silver gray for a more beautiful appearance..
- The opening diameter of the 3 tube sockets is 19mm, The distance between the sockets is increased in order to facilitate the installation of some larger enthusiast RC components..
- Frame size: 150x60x25mm / 5.9x2.36x0.98 inch..
- Package Includes: 1pc Large L-type Mounting Bracket, 2pcs Small L-type Bracket, 3pcs Silver Plated Small 9-pin Tube Sockets, 16sets 3*8mm Mounting Screws (Not contain tubes and other parts)..
Check StockSmallRig NATO Top Handle with Remote Trigger for Panasonic and for Fujifilm Mirrorless Cameras 2880
- Compatibility: SmallRig 2880 design for Panasonic and for Fujifilm Mirrorless cameras cage, It's compatibility for Panasonic GH4/GH5/GH5S / G9/G95/....
- Control Camera Start/Stop: SmallRig 2880 to provide a comfortable grip and features record button on top to control camera start/stop. And the....
- Multiple Mounting Mount: The top handle 2880 featuring multiple 1/4"-20, 3/8" -16 and 3/8" -16 threads for ARRI . And it attaches to the camera cage....
- Control Cable: The NATO top handle includes cable is remote to the type C standard for Panasonic, and the front of the handle features a slot for....
- Cold Shoe Mount: Built-in three cold shoe mounts, and one of which is designed with an anti-slip button allows mounting mic, light, as well as Monitor....
Check StockGeneric Wheel Kit for Generac iQ3500 Generator | All-Terrain Pneumatic Tires
- 10" all-terrain inflatable tires on steel wheels.
- Heavy duty 5/8" axles made from cold-rolled steel.
- Heavy duty 1/8" thick aluminum mounting rails.
- All necessary mounting hardware included.
Check Stock
XFasten Clear Double Sided Mounting Tape Squares, 1" Pre-Cut Poster Sticky Squares, Clear, 80 Nano Mounting Squares Removable Square Putty Tape Gel Nano Square Poster Tape for Walls Stucco Glass
- PRE-CUT 1-INCH GEL MOUNTING SQUARES. This reusable transparent double-sided square nano tape is conveniently cut in 1-inch squares. To apply, simply peel off the adhesive liner, and it's ready to use! This double sided square tape also removes cleanly, traceless, without residue, and without peeling off the surface paint..
- HEAVY-DUTY REMOVABLE MOUNTING SQUARES. No more worrying when mounting kitchen and bathroom tools because five removable square putty tape gel can support up to 3lbs. It can also last up to two years and withstand harsh weather conditions such as strong wind, UV, high heat, snow, and rain. In addition, it can withstand temperatures of -16°C (3.2F) to 75°C (167F), and it doesn't turn gummy when exposed to too much heat..
- EASY TO USE DOUBLE SIDED NANO MOUNTING SQUARES. It is equipped with an easy-release adhesive liner. This heavy-duty double sided square nano tape will not curl or stick unnecessarily, so it sticks only on the surface you intend to install..
- TRACELESS WASHABLE ADHESIVE TAPE. Are you trying to put some seasonal decorations in the house and office? Switch to the new nano double sided poster ....
Check Stock
