Best Cold Pressing Terminal
RLECS 2pcs Terminal Bus Bar Terminal Block Brass Wire Screw Terminal Grounding Strip Bus Bar Block
- Contact material: copper Production process: cold pressing Insulator material: plastic..
- Total Size: 83 x 12 x 21mm/3.3" x 0.5" x 0.8"(L*W*H). Mounting Hole Diameter:4mm/0.16"..
- Mounting Hole Center Distance:69mm/2.7"..
- Widely used in power distribution cabinets, distribution boxes, mechanical equipment factories, electrical equipment factories, etc..
Check StockLotFancy Battery Terminal Connectors Tinned Brass 4PCS Quick Release Disconnect Car Battery Terminal 4 Way Positive Negative for SAE/JIS Type A Posts
- ...eries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
- 【Dimension】For wires diameters 4.1 – 8.2mm (AWG gauges 0 – 16) or section 13.5 – 53.5mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
- 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
- 【Sturdy & Durable】The battery terminals are made of tinned brass, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss.
- 【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Just make sure to connect the correct terminal for the correct polarity.
Check StockLotFancy Battery Terminal Connectors, Tinned Brass, 2PCS Quick Release Disconnect Car Battery Terminal, Positive Negative for SAE/JIS Type A Posts
- ...uto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
- 【Dimension】For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm. Minimum wire size: 16mm (5/8 inch ). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
- 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
- 【Sturdy & Durable】The battery terminals are made of tinned brass. Tinned brass is brass coated by a base alloy such as solder better known as tin. It strengthens the brass's natural properties, making it better equipped to resist humidity, high temperatures and wet environments.
- 【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Just make sure to connect the correct terminal for the correct polarity.
Check Stock2pcs 12V Automotive Top Post Car 3 Way Battery Wire Cable Terminals Clamp Connectors Kit Positive and Negative Set Red & Black
- 【Dimension】Size: Appro2.16X1.37X1.77 inch (As the picture show) ..
- 【Sturdy & Durable】Our quick disconnect battery terminal made of tinned copper not only have good conductivity and corrosion resistance, but also can reduce voltage distortion and transmission loss.Positive Negative Battery Terminal Material: Pure Copper + Plastic..
- 【Easy to use】Our products——the battery post terminals Connectors Copper Color: Red(+) & Black(-).Wiring is easy to modify and connection is firm. Batteries can be connected to the battery posts by pressing down the lever, so no tools are needed..
- 【Wide application】These battery terminal connectors can be used for most 6/12V Cars, Vans, Caravan, Motorhomes, boat, Truck Batteries etc. Just make sure to connect the correct terminal for the correct polarity..
- 【You will get】2Pcs pure copper battery terminals connectors.I believe our product can fully meet your requirements. If you have any questions, please feel free to come to us, we will provide high-quality guarantee and friendly customer service..
Check StockAWBLIN Battery Terminal Connectors, 2PCS Quick Release Disconnect Multiple Car Battery Terminal Replacement with Hex Wrench, Positive Negative for SAE/JIS Type A Posts
- ...ery models. This Car Battery Cable Ends work great for replacing worn out and corroded terminals..
- DIMENSION: For wires diameters 0.20in – 0.29in (AWG gauges 1 – 4) or section 16 – 35mm². Max wire clamp: 8mm/0.31in. After the Quick Release Battery Terminals installing battery, connects to the battery posts by pressing down the lever, so no tools needed. The Battery Post Terminals do easy to operation..
- HIGH QUALITy: The Battery Terminal Ends are made of tinned copper, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss..
- WIDE APPLICATION: These Automotive Battery Terminals can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries,RV etc. Just make sure that the Battery Clamps connect the correct terminal for the correct polarity..
Check StockCar Battery Terminals Connectors with 4 Ways Battery Clamps Quick Disconnect Battery Terminal with Hex Wrench Tinned Copper,Positive&Negative Applicated in Car Truck RV etc.
- ...models. This Car Battery Cable Ends work great for replacing worn out and corroded terminals..
- 【DIMENSION】For wires diameters 0.20in – 0.29in (AWG gauges 1 – 4) or section 16 – 35mm². Max wire clamp: 8mm/0.31in. After the Quick Release Battery Terminals installing battery, connects to the battery posts by pressing down the lever, so no tools needed. The Battery Post Terminals do easy to operation..
- 【HIGH QUALITY】The Battery Terminal Ends are made of tinned copper, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss..
- 【WIDE APPLICATION】These Automotive Battery Terminals can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries,RV etc. Just make sure that the Battery Clamps connect the correct terminal for the correct polarity..
Check Stock2Pcs Battery Terminal Connectors, 4 Way Positive Negative Car Battery Terminals Clamp Connector Quick Release Disconnect for SAE/JIS Type A Posts, for Marine Car RV (yellow)
- Dimension - For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm. Minimum wire size: 16mm (5/8 inch ). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in..
- Easy to use -The battery post terminals connectors are easy to identify with positive (red) and negative(black) labeled. Comes with 1 hex key for easy installation. Wiring is easy to modify and connection is firm. Batteries can be connected to the battery posts by pressing down the lever, so no tools are needed..
- 4 Way Battery Terminal -The SAE battery terminals connectors has 4 posts for wire connection. Designed for multiple cable connections, mainly used for SAE / JIS TYPE A rear car battery..
- Sturdy & Durable - The quick disconnect battery terminal made of tinned copper not only have good conductivity and corrosion resistance, but also can reduce voltage distortion and transmission loss..
- Wide Application - Our battery terminal connectors suitable for Cars, Vans, Motorhomes, Caravan, Truck, Marine Batteries,etc. Just make sure to connect the correct terminal for the correct polarity. Works great with good electrical conductivity and corrosion resistance..
Check StockThe Fuse Box
- ✔️[CONVENIENT INDICATION]When a blown fuse is detected, The related red LED warning light will light up immediately, Remind you to check and replace the blown fuse..
- ✔️[STRUCTURE]6-way block fuse is applied to ATC/ATO (Middle Size) fuses, Which has positive & negative side, Meaning for every positive terminal screw there's a negative terminal screw ..
- ✔️[SUPERIOR MATERIAL]Fuse box made of environment friendly PBT material,clear fuse protection cover Insulating cover with black push latch system, easy to open the cover by pressing it. Also this transparent design also helps to add extra protection to your fuse box & fuses,The fuse box holder has LED light indicators and a strong construction.It meets all the standards of an ideal fuse box. It is mechanically strong, insulated, heat resistant and flame resistant.
- ✔️[CONVENIENT STICKER LABEL]Comes with multifunctional DIY sticker According to the name on the sticker, You can immediately identify which appliance is going wrong, Convenient for examination and repair, Easy to troubleshoot in outdoors and save time.
- ✔️[WIDE APPLICATION]Widely used in 1 2V/24V car, autos, buses, tankers, ship, marine, truck, vehicle, SUV, yacht, RV, boats etc..
Check StockAoerzn Premium Battery Terminal Connectors, 2Pcs Quick Release Disconnect Car Battery Cable Terminal, Positive Negative for SAE/JIS Type A Posts, Good Contact, Corrosion Resistance
- THE AOERZN ADVANTAGE: Join our customer groups, and enjoy more excellent auto parts. Cooperate happily! Note: During installation, it is not recommended to overighten these two screws.Prevent rupture..
- WIDELY APPLICABLE: Our battery terminal connectors suitable for Cars, Vans, Motorhomes, Caravan, Truck Batteries, Car Audio, etc. Just make sure to connect the correct terminal for the correct polarity. Works great for replacing worn out and corroded terminals..
- CONVENIENT: This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided hex wrenches make for easy installation. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed. Convenient wiring and firm connection..
- HIGH-QUALITY: The battery terminals are made of tinned copper, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss. Fits on round post auto batteries SAE/JIS Type A posts..
- YOU WILL GET: 2Pcs pure copper battery terminals connectors. 1Pcs Alan wrenches. I believe this product can fully meet your requirements. Welcome guide, high quality assurance and friendly customer service..
Check StockOdyssey Battery ODS-AGM28 Extreme Series AGM Battery
- Cold Cranking Amps (CCA): 330 – HCA: 610.
- Terminal: Internal threaded left positive brass terminal with M6 SS bolts, and L bracket adapter.
Check Stock100Pcs 2P CH2 + 3P CH3 Quick Connector Spring Wire Connector Screw Terminal Barrier Block for LED Strip Light Wire Connecting - 4 Styles
- ...lating fireproofing material, safe and non-toxic, corrosion resistance. High pressure resistance, high melting point, high temperature resistance, can work at -40ºC to 150ºC. Long life, can be used continuously for 50 years, the service life is more 10 times than the electrical tape..
- ✔ GOOD ELECTRIC CONDUCTION: Pressing sheet is high quality conductive steel spring, good elasticity, strong toughness, high rate of electricity, energy saving, corrosion resistance, high quality and safety..
- ✔ CONVENIENT TO OPERATION: Simple operation, saving time and effort. Using Spring connectors only process 3 steps: Hold down the item and press the terminal, and then put the peeled wires into the terminal, finally loose hands and finish the connection. Using screw terminal barrier block only have 3 steps too: Firstly, loose the screws, and then put the wires into holes, finally fasten the screws and over..
- ✔ HIGH QUALITY: There is clear mark on the surface. L end connects live line. N end connects neutral line, the product has passed CE certification, in line with UL, IEC standard requirements. Superior quality and easy to use..
- ✔ MULTIPURPOSE: Can be used in motor, electrical control, power supply, home appliances, lighting, machinery and other electrical co....
Check Stock2PCS Battery Terminal Connectors 4way Positive Negative Battery Clamp car Terminals Connector Battery Terminal Quick Release Disconnect for SAE/JIS Type A Posts with Terminal Cleaning Brush(Silver)
- 【Easy to Use】 With positive and negative labeled, easy to identify. 1 hex key provided for easy installation. Quick disconnect. After installing battery, connect to the battery posts by pressing down the lever, so no tool needed..
- 【Convenient and Firm】 The Battery Terminal has 4 way terminals, designed for multiple connections. Wiring is easy to modify. Convenient wiring and firm connection..
- 【Made of High Quality】 The Battery Terminal Connectors are made of tinned copper, which is corrosion resistant, with good electrical conductivity.
- 【Dimension】 For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. Positive inner diameter: 17.5~19.1mm, Negative inner diameter: 15.9~17.5mm..
- 【Wide Application】 Fits on round post auto batteries SAE/JIS Type A posts. The positive and negative battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Note:If you receive defective parts, don’t worry, please tell us immediately, we will give you the perfect solution!!.
Check StockKalevel 6pcs 2-Way Speaker Box Terminal Subwoofer Box Connector 75mm Spring Loaded with Screw Binding Post and 10pcs Screws
- ✅ Set of 16 -- This item includes 2pcs round speaker box terminals, 4pcs screw binding posts and 10pcs bonus screws..
- ✅ Available Sizes -- Speaker terminal box is available in 4 overall diameter sizes, including 75mm, 82mm, 90mm and 105mm Set.(Please choose your appropriate one).
- ✅ Screw Binding Post -- Screw binding post supports bare wire and spades, ensuring optimal signal transfer and adopting positive (red) and negative (black) indicators for proper wiring..
- ✅ Easy to Install -- Spring loaded speaker cup connector allows you to insert the wire by pressing it down and install directly. You can also replace spring loaded type with screw binding post to install..
- 【Material】 -- Speaker wire terminal cup is mainly made of premium plastic and metal, reliable, no rust and durable. Designed for DIY speaker, subwoofer boxes, bare wire (diameter below 0.2in)..
Check Stock