Categories

Best Cold Shrink Tube

XHF 164 FT 1/4\ Heat Shrink Tubing Roll 2:1,Electrical Industrial Shrink Tube for Wire Insulation Black

  • [Safety and environmental protection] XHF 2：1 heat shrink tube are CSA certified, RoHS compliant, free of formaldehyde (HCHO), heavy metals and other harmful substances. Don't worry about it hurting your body and environment..
  • [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on..
  • [Good shrinkage performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break..
  • [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 2:1 heat shrink ratio and will shrink to the original 1/2..
  • [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from..
Check Stock

650pcs Heat Shrink Tubing Black innhom Heat Shrink Tube Wire Shrink Wrap UL Approved Ratio 2:1 Electrical Cable Wire Kit Set Long Lasting Insulation Protection, Safe and Easy, Eco-Friendly Material

  • Safe and Environmental Friendly Material Shrink Wrap: Conform to UL224, CSA C22.2, RoHS standard. Electrical heat shrink tubing material composition does not contain heavy metal and other environmentally hazardous substances. No slowly or long-term virulence. No need to worry about your health when using innhom heat shrink wrap..
  • Premium Quality Heat Shrink Tubing Set: Excellent flame retardant (UL 224, VW-1) and insulation performance. Soft and flexible wire shrink wrap, low shrinkage temperature-minimum shrinkage temp: +158℉(+70°C), fast shrinkage, easy and convenient to use with a heat gun..
  • Effective and Long Lasting Protection: innhom heat tube shrink has the advantages of good tightness, acid and alkali resistance, durable and anti-aging. Shrink wrap wire tensile strength: 14 Mpa. Dielectric strength: 003e20kV/mm. Elongation at break: 003e400%. Volume resistivity: 003e1.0× 10^14Ω.cm. Cold-resistant bending -22℉(-30 °C) × 1h without cracking. Use innhom heat shrink tubes instead of ugly and short-lived electric tape..
  • Functional Wire Shrink Wrap Tubing: Covers all gauges of heat shrink wires you'll need in RC hobbies and many other applications. innhom heat shrink tubing assortment is mainly used in wire connection, rust prevention and cor....
Check Stock

XHF 164 FT 1/16' Heat Shrink Tubing Roll 2:1,Electrical Industrial Shrink Tube for Wire Insulation Black

  • [Safety and environmental protection] XHF 2：1 heat shrink tube are CSA certified, RoHS compliant, free of formaldehyde (HCHO), heavy metals and other harmful substances. Don't worry about it hurting your body and environment..
  • [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on..
  • [The rubber liner has good sealing performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break..
  • [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 2:1 heat shrink ratio and will shrink to the original 1/2..
  • [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from..
Check Stock

Pointool Heat Shrink Tubing Kit-Wire Shrink Wrap Tubing Wire Heat Shrink Tube Kit Insulation Electrical Colored Assorted Heat Shrink Tubing Assortment Electronics for Wires Shrink Ratio2 1,650Pcs

  • MULTIPLE SIZES AND COLORS-Contain any size you may need for anything from professional repair to DIY work at home, so the shrink tube is very convenient when working with different size wires. You may not use these wire shrink wraps a lot, but when you do, there's always a size that comes in handy. This heat shrink tubing kit affords wide variety of sizes and colors, especially the smaller size which hardest to find..
  • SHRINK QUICKLY, DURABLE and EVENLY-This shrink tube is well made of high quality material, thick and durable. Cover the area with them and shrinking them with a heat gun, then the wire shrink wraps will wrap the wire tight and evenly within 10 seconds. With this heat shrink tubing kit you will become more confident in your soldering work..
  • EASY TO USE-You can just shink the shrink tube with a lighter or hair dryer when you don't have a heat gun on hand. Of course, if you'd like to use the heat shrink tubing kit more professional, standard heat gun will be much better lol. The wire shrink wraps are all pre-cut into the most common sizes you'll need which makes your work a lot faster..
  • KEEP ORGANIZED-The heat shrink tubing comes in a nice compact case and the semi-modular container keeps each size separately. You can throw the heat shrink tu....
Check Stock

XHF 1 Inch (25mm) 3:1 Waterproof Heat Shrink Tubing Marine Grade Wire Cable Adhesive Lined Tube Insulation Seal Against Moisture Corrosion and Air Leakage, 4 Ft Black

  • [Better protection]: double wall heat shrink tube and lined with glue can better act on the wrapped objects..
  • [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on..
  • [The rubber liner has good sealing performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break..
  • [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 3:1 heat shrink ratio and will shrink to the original 1/3..
  • [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from..
Check Stock

XHF 5/8 Inch 15mm 3 1 Waterproof Heat Shrink Tubing Marine Grade Wire Cable Adhesive Lined Tube Insulation Seal Against Moisture Corrosion and Air Leakage 4 Ft Black

  • [Safety and environmental protection] XHF dual wall shrink tube are UL and CSA certified, RoHS compliant, free of formaldehyde (HCHO), heavy metals....
  • [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints,....
  • [The rubber liner has good sealing performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion....
  • [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 3:1 heat shrink ratio and will shrink to....
  • [Note]: Please ignore the product description size on the picture label of the product packaging. This size is not related to the product inside the....
Check Stock

Heat Shrink Tubing Kit,Mini Heat Gun + 328 PCS Heat Shrink Wrap Tube　2:1.

  • 328Pcs Heat Shrink Tube Shrinkage - It is 2:1 heat shrink ratio, and will shrink up to 1/2 of original, just use the mini heat gun heating for it 5 second..
  • High-quality heat gun: The hot air gun has two heat dissipation ports, and the service life can reach more than 5 years. 300W power is suitable for many DIY productions and can dissolve hot melt glue sticks and glue. Of course, it is definitely suitable for heat shrinkable tube..
  • Eight sizes high-quality heat shrink tubing for your choose, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. First turn on this mini hot air gun switch,then glue inside will soften and seal the connection..
  • [Product parameters] Heat gun ：The length is 22 cm, which can produce high temperature of 200 degrees Celsius, and the US plug. Heat-shrink Tubing: 8 sizes, 5 colors, the sizes are 1mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 14mm..
  • [Product warranty:] The heat gun can be used for five years. If it is broken under normal use, it will be replaced for free within five years. The heat shrinkable tube is RoHS compliant and free of formaldehyde. VETIN only produces safety products..
Check Stock

The Paris Apartment: A Novel

  • 【What You Get:】 10 Pcs per pack of 1/0 Guage (AWG) 3/8″ ring terminals, copper lugs closed end termination ring terminals with 10 Pcs 3:1 Dual Wall Adhesive Heat Shrink Tubing Tube for your work(5pcs Black and 5pcs Red)..
  • 【Quality Material:】 The TKDMR bare copper battery cable ends are made from 100% annealed copper with special treatment surface for corrosion protection, providing a high degree of conductivity for maximum current flow. Can be Crimped or Soldered.The 3:1 shrink tube is well made of high quality material(UL & CSA certified for up to 600V,257℉）, thick and durable than 2:1 shrink tube..
  • 【Reliable and Easy to Use:】These battery lugs with heavy duty construction,improves high temperature durability and have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation.
  • high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency..
  • 【Wide Applications:】These Copper Lugs works with Heat Shrink Tubing which are safe and reliable , greating for distribution box, golf carts, solar panels, marine,home applications,Vehicle,Motorcycle,DIY ....
Check Stock

Industrial Heat Shrink Tubing Kit,AIRIC 300pcs 3:1 Heat Shrink Tube Adhesive Lined - Dual Wall Tube - Marine Heat Shrink Tubing Black, 7 Sizes(Diameter): 3/4, 1/2, 3/8, 1/4, 3/16, 1/8, 3/32 inch

  • 7 Sizes: Industrial heat shrink tubing kit includes 7 most commonly used diameters ranging from 3/32" to 3/4". The length of heat shrink tube is precut to 45mm..
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Safer Dual Wall Tube: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing industrial can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

720 PCS Heat Shrink Tubing Kit, Heat Shrink Tubes Wire Wrap, KOOWIN Ratio 2:1 Electrical Cable Wire Kit Sleeve Assortment with Box Set Insulation Protection (8 Sizes Assorted, Polyolefin Black)

  • 【Product Parameter】High Quality Shrinkage Ratio: 2:1(will shrink to 1/2 its supplied diameter), Operating Temperature: -55°C to 125°C, Shrink Temperature: 84℃-120℃, Withstand Voltage: 600V.
  • 【Complete Variety】Comes with 720 pcs black heat shrink tube assorted in plastic box, 8 Specifications , satisfied for your different need, The heat shrinkable tube with a length of 1-9/16 inch has a diameter of Φ3/64" (1MM) 160 PCS, Φ5/64" (2MM) 120 PCS, Φ1/8" (3MM) 120 PCS, Φ5/32" (4MM) 90 PCS, Φ13/64" (5MM) 60 PCS, Φ15/64" (6MM) 50 PCS, Φ5/16" (8MM) 60 PCS, Φ25/64" (10MM) 60 PCS..
  • 【Multifunctional & DIY assistant】There are many sizes of high-quality heat shrinkable tubes for you to choose, they can be used for solder joint protection, wire group marking, resistance and capacitance cause protection, etc..
  • 【Easy to Use】 This heat shrinkable tube has good electrical insulation, corrosion resistance and high temperature resistance. Soft and soft wire shrink sleeve, low shrink temperature-minimum shrink temperature: 84°C, fast shrinkage, easy to use heat gun.
  • 【30-Day Refund】All customers enjoy 30-day refund & one-year warranty service. If the customer is not satisfied with the purchase for any reason, the product can be returned or refu....
Check Stock

1000Pieces Hair Extensions Heat Shrink Tubes 10mm Long Hair Extensions Rings (1000Pcs, Transparent)

  • 【HEAT SHRINK TUBES 】- As this tube shrinks, the keratin glue inside the tube melts and creates an incredibly strong bonding..
  • 【MATERIAL】Made of high quality keratin glue,easy melted and strong bonding effect,no harm to your natural hair..
  • 【Packing】Package will includes 1000pcs heat shrink tubes + 1pcs hook needles + 10pcs hair spacer template.
  • 【USE】Hair extensions heat shrink tubes is suitable for hair extensions applications,like feather hair extensions,I-tip hair extensions.
  • 【NOTICE】Shrink Tubes must be heated for more than 10 seconds !!!Also do not used high temperture or the tubes will be melted..
Check Stock

Sanuke 120Pcs AWG 8 6 4 2 Copper Wire Lugs with Heat Shrink Set, 60Pcs Heavy Duty Battery Cable Closed End Tubular Ring Terminals Connectors with 60Pcs Heat Shrink Tubing

  • ☆『What You Get:』In this set, we offer 12types 60Pcs of AWG 2 4 6 8 copper tube end termination ring terminals for your work, 2 sizes 2 colors 60PCS of 3:1 Dual Wall Adhesive Heat Shrink Tubing Tube, meet your different needs..
  • ☆『High Quality:』 All the ring terminals are made of 100% annealed electrolytic grade copper for maximum conductivity, with tinned surface for corrosion protection.Can be Crimped or Soldered.All the 3:1 shrink tube is well made of high quality material, thick and durable.They are for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable.
  • ☆『Reliable and Easy to Use:』Terminals with heavy duty construction improves high temperature durability and closed design seals out the moisture, ensure connection reliability.
  • high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency..
  • ☆『Wide Applications :』These battery cable wire lugs are safe and reliable, great for distribution box, marine, golf carts, solar panels, home applications, etc.Heat Shrink Tubing is Ideal Used for Vehicle, Motorcycle, Boat, DIY Electrical Wirings and Other Outdoor Applications..
  • ☆『Keep Organized:』 The 60Pcs 3:1 heat shrink tube....
Check Stock

Sublimation Shrink Wrap Sleeves,5x10 Inch Clear Sublimation Heat Transfer Shrink Tube Bands for Water Bottle,Mugs,Cups,Tumblers,Shrink Wrap Film for Sublimation Blanks,50 Pcs

  • ✅【WHAT YOU WILL GET】50 Pcs 5x10 Inches sublimation heat shrink wrap sleeves,easy sublimation heat transfer without any heat transfer machine , only film +sublimation blank +oven.
  • ✅【EASY TO USE】You just need cover the shrink film on mugs,tiles,or other sublimation blanks.Then put them into the oven and design time and wait the finished products about 338°F(170℃) and 5 minutes.The process can be done at home, which is very simple ,easy and economic.
  • ✅【HIGH QUALITY】These sublimation shrink wrap tube are made of premium material,safe,non-toxic and odourless.
  • ✅【WORK GREAT】Get amazing quality sublimation transfers with these heat shrink tube for sublimation! By conforming to the size and shape of your substrate, these sublimation heat shrink sleeves provide the most consistent transfers. Simply place your substrate into the bag and then into your oven, and the heat shrink bag will form to your item.
  • ✅【MULTIFUNCTION】Sublimation shrink wrap bands are perfect for flat items and curved items, such as sublimation blanks mugs,tumbler,cups,water bottle,keychains,earrings,coaster,tags,phone case,license plate,puzzle,mouse pads,photo frame, and more crafts.
Check Stock