Boltigen Pressure Washer Swivel Fitting, Anti Twist 3/8 NPT Male to Female Stainless Steel Connector Joint, 360 Degree Kink Free Swivel Fitting (3/8 NPT Male to 3/8 NPT Female-1Pc)
- 【Swivel Fitting】 Kink free Swivel Joint for pressure washer with 3/8'' NPT male and female thread fitting，connects hose to hose or gun to hose..
- 【Smart Design】 Pressure washer swivel joint with 360 degree rotation, eliminates twists and kinks on working, reduces stress on not only hose and gun, but also operator..
- 【High Working Pressure】 Working pressure of washer gun fitting is up to 4500 PSI and working temperature is up to 250 °F, suitable for hot and cold water. Pressure washer fitting is made of high quality stainless steel, resistance to corrosion and long life using. Max Flow Rate: 30.0 GPM..
- 【Application】 Suitable for connect swivel fitting between gun and hose, Swivel fitting rotates freely, reduces the strain on your wrist when using the pressure washer..
- 【Quality Warranty】 The stainless steel pressure washer swivel joint for your pressure washer gun and hose. We did 100% inspection before goods leave our factory, if you have any problem with these products, we will 100% refund to you or replace a new set for you..
Check StockTC-Home Natural Gas Instant Tankless Hot Water Heater 4.2 GPM Boiler House (Natural Gas-16L)
- Gas Type: Natural Gas, Capacity:16L/min (4.2 GPM), 25 degrees warm water producing rate.
- Working temperature:-8-45℃, Thermal input: 32 KW, Thermal efficiency: ≥80.8%,Temperature rise: 25℃.
- High-quality stringy stainless steel panel, Copper water tank.
- Minimum working water pressure: 0.025MPa, Cover Material: Cold Rolled Sheet.
Check StockTC-Home Natural Gas 16L Digital Display 4.2 GPM 32 KW Instant stainless steel Hot Water Heater
- Gas Type: Natural Gas, Capacity:16L/min (4.2 GPM), 25 degrees warm water producing rate.
- Working temperature:-8-45℃, Thermal input: 32 KW, Thermal efficiency: ≥80.8%,Temperature rise: 25℃.
- High-quality stringy stainless steel panel, Copper water tank.
- Minimum working water pressure: 0.025MPa,.
- Gas pressure: 2000Pa, Gas inlet: G1/2'', Vent Type:4.3" Flue Duct.
Check Stock
DAVCO 3/4\ ID x 25 ft PVC Reinforced Tubing With Spiral Steel Wire, High Pressure Flexible Vinyl Hose Heavy Duty Clear Suction Tube,Non-Toxic, Vacuum Dust Collection Pipe
- ... double layer of high quality PVC material and reinforcement layer of spiral steel wire, longer service life, the service life of steel wire hose is 5 times of ordinary hose, is the ideal choice of hose..
- [Tubing Details]. 3/4 inch inner diameter, 1 inch outer diameter, wall thickness: 1/8 inch , 25 feet length. Max Working pressure:120 PSI. Temperature range: 25°F to 150°F(-4°c to 66°c)..
- [Strong Pressure Resistance]. DAVCO tube wall is thickened design, strong resistance, in vacuum and high temperature environment can maintain a good working pressure up to 8 bar, with steel wire embedded layer, hose bearing capacity is stronger, will not burst..
- [High standards]. DAVCO clear vinyl tubing use professional technology and teams. The DAVCO brand has high requirements for products, and every product that is manufactured must go through 5 inspection and testing stages，ensuring that every product meets our high expectations. In addition, Our team in Los Angeles, CA is fully committed to providing 7x24 customer & technical support. Thus ensuring that customers have a good shopping experience..
- [Experienced and professional]. DAVCO is a professional brand that is committed to the water hose production industry. For the past 10 years, our products have bee....
Check StockDAVCO 3/4' ID x 10 ft PVC Reinforced Tubing With Spiral Steel Wire, High Pressure Flexible Vinyl Hose Heavy Duty Clear Suction Tube,Non-Toxic, Vacuum Dust Collection Pipe
- ... double layer of high quality PVC material and reinforcement layer of spiral steel wire, longer service life, the service life of steel wire hose is 5 times of ordinary hose, is the ideal choice of hose..
- [Tubing Details]. 3/4 inch inner diameter, 1 inch outer diameter, wall thickness: 1/8 inch , 10 feet length. Max Working pressure:120 PSI. Temperature range: 25°F to 150°F(-4°c to 66°c)..
- [Strong Pressure Resistance]. DAVCO tube wall is thickened design, strong resistance, in vacuum and high temperature environment can maintain a good working pressure up to 8 bar, with steel wire embedded layer, hose bearing capacity is stronger, will not burst..
- [High standards]. DAVCO clear vinyl tubing use professional technology and teams. The DAVCO brand has high requirements for products, and every product that is manufactured must go through 5 inspection and testing stages，ensuring that every product meets our high expectations. In addition, Our team in Los Angeles, CA is fully committed to providing 7x24 customer & technical support. Thus ensuring that customers have a good shopping experience..
- [Experienced and professional]. DAVCO is a professional brand that is committed to the water hose production industry. For the past 10 years, our products have bee....
Check Stock
Gold Armour 30 oz Tumbler - 6 Piece Stainless Steel Insulated Water & Coffee Cup Tumbler with Straw, 2 Lids, Handle, Straw - 18/8 Double Vacuum Insulated Travel Flask (Blue)
- ✔VACUUM INSULATED 30 OZ TUMBLER WITH STRAW, 2 LIDS, AND HANDLE- Double wall vacuum insulation maximum temperature retention & insulates hands from the cold. Keeps cold for 24+ hours and warm 12+ hours.
- ✔SWEAT FREE & BPA FREE - Durable, rust proof and sweat free design. BPA free. Perfect for use at the office, travel, hiking, home, roadtrip, working, and more..
- #1 PREMIUM QUALITY - While other steel tumblers out there may use a cheaper 201 steel finish.
- we’ve cut no corners! Made only from the Highest Quality Premium 304 18/8 Food Grade Stainless Steel..
- ✔FREE BONUS - 6 Piece Set includes 30oz tumbler + leak proof lid + sliding lid [Free Bonus] + stainless steel straw [Free Bonus] + handle [Free Bonus] + straw cleaning brush [Free Bonus].
- ✔10 YEARS LIMITED WARRANTY - The Tumbler set comes with 10 Years Limited Warranty Gold Armour is dedicated to address any product/service issues and is committed to delivering the best experience for all buyers..
Check StockM MINGLE Pressure Washer Swivel, 3/8 Inch NPT Male Thread Fitting, Stainless Steel, 4500 PSI
- Kink free Swivel Joint for pressure washer with 3/8'' NPT male and female thread fitting. Eliminates hose twist and no kink..
- 360 degree rotation. Reduces stress on the gun, hose and operator..
- Max Working Temperature: up to 120℃, 250°F degree, suitable for hot and cold water. Made of high quality stainless steel. Max Working Pressure: 4500 PSI. Max Flow Rate: 30.0 GPM..
- Connect 3/8’’ NPT male swivel to gun and connect to 3/8’’ female thread fitting to hose..
- The universal swivel joint also can connect hose to hose..
Check StockMECCANIXITY Bonded Sealing Washers 25x5.5x2.8mm Stainless Steel EPDM Rubber Backed Screw Gasket, Pack of 100
- The composite screw washer is suitable for outdoor or humid environment, no rust, corrosion resistance, acid resistance, better water resistance and applicability, and not easy to break.
- 304 stainless steel is austenitic stainless steel, austenite is partially transformed into martensite (magnetic) during the cold working process, so it will non-magnetic or weakly magnetic.
- The one-piece fender gasket is slightly angled surface but flattened as it's tightened. The bonded sealing gasket provides an airtight seal between the bolt or screw and the hard surface.
- It can avoid thermal expansion and cold contraction during installation, improve the fastening effect, sealing, dust-proof, and waterproof functions. Also serves as a cushion protecting from vibration.
Check StockM MINGLE Pressure Washer Swivel Fitting Metric M22 14mm Thread Stainless Steel 4500 PSI
- Pressure washer swivel with M22 14mm male and M22 female thread fitting. Eliminates hose twist and no kink..
- Pressure washer hose swivel could 360 degree rotation. Reduces stress on the gun, hose and operator..
- Max Working Temperature: up to 120℃, 250°F degree, suitable for hot and cold water. Made of high quality stainless steel. Max Working Pressure:....
- Convert metric M22 14mm male to M22 female swivel. Connect gun to hose or hose to hose..
- AMZ Tool is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock
Personalized Can Cooler for Soda Custom Engraved on Black 12 oz Insulated Bottle Beverage Drink Holder
- THE PERFECT PERSONALIZED GIFT - This customizable Can Cooler makes the perfect gifts for Birthdays, Weddings, Christmas, Mothers Day, Anniversary. It is a create your own gift to a wife, daughter, grandma, Best Friend, Coworker, or any other man or women in your life such as niece, aunt, Nana, teacher, or sister in law..
- FITS 12oz SLIM CANS - This custom can cooler is specially designed to fit most 12oz cans. Allowing you to keep your energy drinks, hard seltzers or even your sparkling water cans ice-cold and exhilarating..
- TOP QUALITY - These Custom Can Cooler are made from durable stainless steel, more specifically Premium 304 18/8 Food Grade Stainless Steel with a copper layer that will keep your drinks colder than most standard neoprene slide on can coolers..
- EASY TO USE - Keeping your drink cold is as simply sliding the can into this can holder and then locking it place with the gasket. Perfect gift to keep your can ice cold..
- 100% CUSTOMER SATISFACTION - We have spent quality time working hands on with these items putting them to the test to assure customer satisfaction. However, if for any reason you are not completely satisfied with your skinny can cooler, please do not hesitate to contact us and we will work together to help you..
Check StockWorldPac (Pack of 4) 3/8-inch, Grade 70 Clevis Grab Hook, Yellow Chromate Finish
- Heavy Duty 3/8" Diameter Pin Clevis Hook.
- Eliminates connecting links and cold shuts.
Check StockPICQUIC SIXPAC Plus 7 pc. Multi-Bit Screwdriver 6 in.
- Extra length 3” powerbits allow extended reach.
- bits are universal 1/4” Hex & ideal for powerdriving.
- Comfortable solid handle provides maximum torque..
- Cold formed Stainless steel shank ensures positive torque-transfer & years of heavy use..
- Spring-lock bitholder retains working bit securely..
Check StockSatco 92-406 Reducer, Color
- Boss fitting hammer union threaded 206 series.
- Runs air, water, oil or gas up to 2,000 psi NSCWP (nonshock cold working pressure).
Check Stock
