Categories

Best Collets For A Lathe

ER11 CNC Collet 3Pcs 1/8 inch 3.175mm 4mm 6mm Spring Collet Workholding Engraving Collet Milling Lathe Tool

  • ☑【Description】-These spring collets are made of high quality 65Mn spring steel for CNC milling lathe tool and work-holding engraving machine..
  • ☑【High Quality】-This Spring Collet Fine workmanship, good elasticity, high precision and run-out tolerance is less than 0.008mm..
  • ☑【Convience】-Each collet is marked clearly so you can easily distinguish them..
  • ☑【Best Choice】-Great collet for CNC milling lathe tool and work-holding engraving machine..
  • ☑【Note】-Collet must be placed into collet chuck nut before inserting into collet chuck..
Check Stock

Proxxon 34104 Mill/ Drill Head PF 230 1.38 X 15.75-Inches

  • Precision proxxon engineering for top quality machinery.
  • 110 - 120V, 60Hz, 140W (0.1877hp), speeds 280 - 550 - 870 - 1,200 - 1,500 and 2,200rpm.
  • The lathe functions as a compound table, with X-Y travel being longitudinal and cross-wise respectively.
  • Three collets of sizes 15/64" - 5/16" and 25/64" (6, 8, 10mm) are included..
Check Stock

INPANOLS R8 Collet Set with 15 PCS ER40 Collets (0.0004'' Accuracy), R8 ER40 Collet Chuck Set

  • Specially designed for milling, drilling, CNC, tapping, lathe and other clamping tool..
  • Adopt high-quality 65MN high-quality spring steel elastic design, high elasticity, large clamping force, not easy to deform after repeated use..
  • This ER40 Collet Set is tested with high precision. Accuracy and Run-out Tolerance are up to 0.0004"..
Check Stock

INPANOLS MT3 ER32 Collet Chuck, Precision Milling Shank Holder, Drawbar Thread 1/2\-12

  • MT3(Morse Taper 3) Shank for ER32 Collets.
  • ★HIGH CENTERING ACCURACY: Max T.I.R. 0.0004" O.D to I.D..
  • ★HIGH HARDNESS: Made of high-quality alloy spring steel and hardened to HRC 58 and all critical surface is precision ground..
  • Specially designed for milling, drilling, CNC, tapping, lathe, and other clamping tools..
  • NOTE: This is an ultra-precision work holding tool. When doing the inspection to ensure that each part is wiped especially clean, and the installation must be in place, otherwise it has a great impact on the accuracy..
Check Stock

INPANOLS R8 Collet Set with 12 PCS ER32 Collets (0.0004'' Accuracy), R8 ER32 Collet Chuck Set

  • Specially designed for milling, drilling, CNC, tapping, lathe and other clamping tool..
  • Adopt high-quality 65MN high-quality spring steel elastic design, high elasticity, large clamping force, not easy to deform after repeated use..
  • Accuracy and Run-out Tolerance are up to 0.0004"..
  • Package Included: 12PCS Collets (3/32", 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4"), 1 PCS R8 Shank Threading (7/16''-20), and 1 PCS Wrench..
  • We provide 2-year warranty and 24-hour friendly customer service..
Check Stock

OrangeA Collet Set CAT40 ER32 CAT40 ER16 Spring Steel Collet Chuck Tooling Package for Milling Machine

  • ...3" or 5 um. Hardened and ground to ensure maximum accuracy. High concentricity. 6pcs CAT40 End Mill Holder in Projection Length: 2.5".
  • ER32 and ER16 Chuck Gage or projection length is 2.75". Collet Chuck of high speed is balanced to meet all industrial standard. Stable performance..
  • Multiple Collet Sizes: 12pcs ER32 collets set by 16th: 1/8".
  • 10pcs ER16 collets set: 1/32", 1/16", 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8". Special angled slots increase rigidity. Better overall balance of tool holder assembly. Use with any standard ER collet chucks for coolant-thru tool applications..
  • Effortless To Operate: Precision collet chucks are designed to be easy to use. V-groove or/and Fully ground flange say it is easy on tool changers for less spindle and changer maintenance..
  • Free Wrenches & Pull Studs: Three free wrenches for extra tightening and easy release if necessary. 10 free HAAS pull studs. Ideal for CNC Lathe/milling, drill press, and heavy duty hand tools..
Check Stock

TINVHY C1 ER32 4In Long Straight Shank Collet Chuck Holder CNC Milling Tool Holder Alloy Steel Chuck Holder

  • 4Inch shank holding all ER32 collets (Clamping range up to 1In).
  • Milling lathe collet chuck holder, high grade DN65 carbon steel material, straight shank, clamping nut, toughened and precision ground.
  • Straight shank type extended handle, the handle body was longer. The surface is quite smooth which offers a comfortable feeling and nice appearance.
  • Widely used in boring, milling, drilling, tapping, grinding and other processing.
Check Stock

TINVHY C1-ER32-100L Straight Shank Collet Chuck Holder CNC Milling Tool Holder Alloy Steel Chuck Holder 25.4 mm shank Holder

  • 25.4 mm shank holding all ER32 collets (Clamping range up to 20mm).
  • Milling lathe collet chuck holder, high grade DN65 carbon steel material, straight shank, clamping nut, toughened and precision ground.
  • C1 ER32 Straight shank type extended handle, the handle body was longer. The surface is quite smooth which offers a comfortable feeling and nice appearance.
  • Widely used in boring, milling, drilling, tapping, grinding and other processing.
Check Stock

CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)

  • 【Z011A 4-Jaw Chuck, FourJaw Mini Lathe Chuck】- 1. 4-jaw design, compact size, easy to use. The Mini lathe tools 4 Jaw Chuck has a large clamping range. Outer diameter about 12 mm-65 mm, Inner diameter: about 1.8mm-56mm..
  • 【Woodworking Accessories Self-centering 4 Jaw Lathe Chuck】- The self-centering lathe part contains a delicate oblique angle gear and pinion gears. They contribute to precise processing progress. Widely used for woodworking lathe..
  • 【Scope Applications of the Zinc Alloy Mini Lathe Chuck】- The 4 Jaw design Lathe Chuck is made of high quality zinc alloy material, wear-resistant, strong and durable. Mainly used for mini metal lathe. Since the changeover and setting time is cut, your lathe can work with higher efficiency..
  • 【Practical Lathe Accessories Self Centering Mini Chuck】- The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
  • The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machin....
Check Stock

Ryobi A25R151 15 Piece 1/4 Inch Shank Carbide Edge Router Bit Set for Wood

  • Works with all RotoZip spiral saw tools and Drywall routers.
  • Keep your RotoZip tool running at full capacity with replacement collets.
  • Kit Includes: 3 collets (1/8-Inch, 5/32-Inch, 1/4-Inch) and nut.
  • Replacement collets for 1/8-Inch, 5/32-Inch, 1/4-Inch bits.
Check Stock

MABUARN ER Spring Collet ER11 ER16 ER20 ER25 Set with Plastic Case for CNC Lathe Engraving and Milling Tool Workholding Chuck ER16 AA 13PCS

  • Material: The ER spring collet set is made of high quality 65Mn spring steel with high wear resistance and durable characteristic..
  • High performance: The run-out tolerance of AA type is less than 0.0003"..
  • Application: It's suitable for CNC, engraving machines and other equipment. Used in milling, boring, drilling, wire tapping and other operations,.
  • Gripping range: --ER11 10PCS (1/16", 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32").
  • --ER16 13PCS (1/16", 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8", 13/32").
  • --ER20 15PCS (1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32". 5/16", 3/8", 13/32", 7/16", 15/32", 1/2").
  • --ER25 20PCS (1/16", 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 9/16", 5/8", 3/4")..
  • Package: ER11: 10pcs of collets with a strong plastic case.
  • ER16: 13pcs of collets with a strong plastic case.
  • ER20: 15pcs of collets with a strong plastic case.
  • ER25: 20pcs of collets with a strong plastic case..
Check Stock

Adjustable Double Bearing Live Center Revolving Center DIY Parts for Mini Lathe Machine Woodworking Tool

  • Lathe Machine DIY Parts: Mini Lathe Machine Woodworking Tool is ideal for using in domestic lathe woodworking lathe miniature car tools and other tools.spur center for wood lathe.
  • High Quality: Mini Lathe Machine Woodworking Tool is made of mental material, good heat resistance, high mechanical strength and durable.mini lathe live center.
  • Adjustable: Holing depth can be regulated and adjustment.live center for wood lathe.
  • Easy To Use: High precision, high hardness, highly efficient.wood lathe.
  • Size: Compact, easy to operate. Tip height: 27mm(appr.), Tip stretchable length: 30mm(appr.), Size: (L) x (W) 10 x 4.3 cm / 3.94" x 1.69"(appr.)..
Check Stock

RIKON Power Tools 70-105 10\ x 18\ 1/2 hp Mini Lathe

  • Rikon mini lathe: This Rikon mini lathe features a ½ motor that provides ample power for all turning needs. With a 10” swing and 18” between centers, this mini lathe also has a self ejecting tail stock and has easy access to speed change..
  • Sturdy and Dedicated: Designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is made from cast iron, so vibration is not a factor, unlike other lathes made of aluminum..
  • 5 speed ranger: This mini lathe has a 5 speed range that covers the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing..
  • Includes: This lathe includes a live center, tool rest, knock-out bar, and wrenches..
Check Stock