Best Colour Bitumen Shingles
Primeline Tools 36-748092 Primegrip Knuckle Saver Roofing Roofer s and Shark Knife Combo Pack
- Primegrip 36-292 primegrip knuckle saver roofing knife, 36-274 roofer's knife and 36-280 shark knife combo pack.
- Long handle keeps knuckles from grazing against shingles. Long-Lasting zinc-reinforced bottom edge and shallow screw for opening quickly.
- Angled grip for easy cutting around caps, dormers and tight corners. Lanyard hole for easy hands-free carry.
- High visibility fluorescent green colour. Bulging grip prevents slipping. Clip holder keeps blades from rattling inside, comes with three SK5 hook....
- Super heavy-duty knife with double notched blade location for added security. Easy blade change using a solid brass notched wheel.
Check StockRoofing Shingles (Gray 3-Tab)
- Includes 8 Gray 3-Tab Shingles That Will Cover Approximately 10 Square Feet of Roof..
- These Shingles Are Guaranteed To Withstand 60 MPH Winds..
- Great Amount For Replacing Missing Shingles or Finishing Small Roofing Project..
- Durable Asphalt Shingles That Will Protect Homes and Sheds From Severe Weather..
Check StockRoof Shingles Shingle Removal Tool Roofing Tools Pitch Hopper Shingle Nail Installer Roof Shingle Nail Puller Nail Remover Pry Bar For Safe Roof Shingles Replacement Roofing tools and Equipment
- 【Durable & Anti-rust Steel.】Our Roof Shingles Remover is made of hard steel material and the 2-in-1 design is more accurate, efficient and safer for quick installing or pulling nails on your roof shingles. With the rust proof and polished coating, our roofing tools will be your practical tool for shingle repairing and replacement..
- 【Nail-slot Design for Secure Grip.】With the unique nail groove design, you can inlay the nail and work in the narrow space smoothly. This Shingle Removal Tool will allow the roofing nails driven perpendicular to roof that bring longer lasting repairs without damaging the shingles with your hammer..
- 【Claw Tip for Nail Puller.】Our Shingle Nail Installer can easily pull out the nail from roofing shingles. Just drive the claw tip under the nail and twist, easily pull out the nail with less efforts that will definitely safe time and money..
- 【Easy to Use & Handy】This roof shingle nail installer is just handy to carry on with 1.1 inch in width and 11 inches in length, which make roofers work more accurate, efficient and safer. Our Roof Shingles are handy and fit for simple storage..
- 【A Must Have for All Roofers.】This shingles removal tool is a must-have for all roofers to remove or repair old or worn-....
Check StockSpray & Forget Revolutionary Roof Cleaner Concentrate Exterior Mold Stain Remover - 1 Gallon
- Spray & Forget Revolutionary Roof Cleaner Concentrate removes stains caused by algae, mold and mildew.
- This concentrated roof cleaner saves time with no rinsing required.
- Great for outdoor use on asphalt shingles, wood shingles, slate shingles, and clay/tile shingles.
- This concentrated roof cleaner, when mixed with water, can cover 1000-2000 square feet.
- To use, follow directions carefully. Apply Spray & Forget every 12-24 months or at first sight of new staining.
Check StockSpray & Forget SFRCHEQ06 Super Concentrated Revolutionary Roof Cleaner (Hose End), 32 oz, White
- Spray & Forget Super Concentrated Revolutionary Roof Cleaner with Garden Hose End removes stains caused by algae, mold and mildew..
- Great for outdoor use on asphalt shingles, wood shingles, slate shingles, and clay/tile shingles..
- Each 1-quart container treats 400-600 square feet and reaches a second story..
- To use, follow directions carefully. Apply every 24-36 months or at first sight of new staining..
- Hose adapter easily attaches to garden hose..
Check StockShingle Removal Tool,Roof Shingle Remover Roof Shingle Nail Puller Shingle Pry Bar,Roofing repairs Removing and installing replacement shingles,Professional Roofing Tools
- 【Handy And Premium Quality】Our Roof Shingles Removers are Made Of Premium High-strength Steel,Portable And Handy Size For Easily Using And Storage.With the rust proof and polished coating, our roofing tools will be your practical tool for shingle repairing and replacement..
- 【Nail-slot and Claw Tip Design】The Nail-slot Head Can Help You Put the Nails Easily.Claw Tip Can Remove Nails Easily From Roof Shingles,Roof shingle remover Makes it way easier to nail underneath shingles and do repairs.During installation, with the extended offset head that holds a roofing nail perfectly and you can strike the offset head with a hammer..
- 【Repair more efficiently】Professional Roofing Tools,it makes replacing individual or multiple Shingles a BREEZE.It saved pulling out old nails and lining up the new ones, For those who don't like being on the ROOF any longer than needed..
- 【A Must Have for All Roofers】Shingle Removal Tool is a must have tool for roofing repairs, it makes removing and installing replacement shingles a breeze without damaging the top overlapping and outer shingles especially if your dealing with a roof that has some age on it..
- 【Quality assurance】Any questions , any reason, you’re not happy with your purchase, please contact u....
Check StockShingling Roofing Hatchet with Milled Striking Face, Three-Position Exposure Gauge, Nail Slot, and Hickory Wood Handle - by EX ELECTRONIX EXPRESS
- High carbon steel shingling hatchet with genuine hickory handle - Built for roofers, contractors, framers, and the DIY inclined.
- Use cutting edge for splitting wood shakes/shingles, and trim roofing felt & asphalt shingles.
- 3 position gauge for setting overhang/exposure at standard 5" (USA), 5 ⅝'' (14.3 cm metric shingles), and 6¼" for specialty shingles.
- There is a small notch in the blade that can be used to pry out nails if needed.
Check StockPacTool RS501 Roof Snake Tool - Shingle Pry Bar - Heavy Duty Nail Remover Tool - Roof Shingle Remover - Professional Roofing Tools
- COMMERCIAL CROWBAR: Replace old and worn-out composition roofing shingles in no time with our practical pry tool. Our roof snake makes removing and applying new shingles more accurate, efficient, and safer than traditional replacement methods..
- ROOFING TOOLS AND EQUIPMENT: Never damage your roof again with this convenient pocket pry bar. Install new 3-tab shingles without bending or hitting surrounding shingles or accidentally striking your fingers with your hammer in the process..
- HAND TOOLS: A must-have for all roofers, this tool is forged from high-strength steel and has a patented offset nail slot feature allowing you to align nails with the correct one-inch offset from the bottom edge of your current course..
- NAIL PULLER TOOL: There is no need for a flat bar with this handy claw tip, Easily loosen and remove old, damaged shingles and nails by driving the claw end under the nail, rolling the nail out, and twisting the roof snake..
- PACTOOL: Trusted for decades, we are the leaders in specialized construction, renovation, and remodeling designs. Our cutting-edge product line inspires craftspeople and DIYers to work smarter, measure better, and repair more efficiently..
Check StockRoof Shingle Snake Tools, Shingle Removal Tool for Safe Roof Shingles Professional Roofing Tools and Equipment Shingle Nail Installer & Puller Pitch Hopper, Pry Bar Furnish Nail Puller Remover
- 【Directly and Fastly Replace】 The roof snake makes replacing composition shingles safer, easier, and more accurate than traditional methods..
- 【Nail Slot Design】 With the unique nail groove design, you can inlay the nail and work in the narrow space smoothly. Allow the roofing nails driven perpendicular to the roof which brings longer-lasting repairs without damaging the shingles with your hammer..
- 【Claw Tip Design】 Easily pull out the nail from the roofing shingles. Just drive the claw tip under the nail and twist, easily pulling out the nail with less effort..
- 【Caution on the Using】 When installing the new 3-tab shingles, do not bend or hit the surrounding shingles, and do not accidentally hit your fingers with the hammer during installation..
- 【Customer Service】 If you have any questions, please feel free to contact us. We will offer the most sincere and high-quality after-sales service for you..
Check StockESTWING Shingler s Hammer - 20 oz Roofer s Tool with Milled Face & Hickory Wood Handle - MRWS
- TRIPLE WEDGE CONSTRUCTION – Securely fastens hammer head to handle.
- HALF HATCHET HEAD – Use cutting edge for splitting wood shakes/shingles.
- BUILT FOR THE PRO – Roofers, framers, contractors, tradesman & serious DIYers.
- VERSATILITY ON THE JOB – Gauge for setting reveal of shingles & blade to trim roofing felt & asphalt shingles.
- GENUINE HICKORY HANDLE – Designed to fit the grip of the user’s hand ensuring comfort & control.
Check StockPro No Ladder Rapid Release 50 Holiday Lights Gutter Clips
- CHRISTMAAS HOLIDAY LIGHTS HANGERS: No Ladder Pro 50 Rapid Release Clips for use on gutters, shingles or eaves..
- GUTTER DECK TREE LIGHT: Snap on, easy to use on gutters, shingles, or eaves..
- CLIP HANGER ON POLE: Fastest, easiest, and safest way to decorate your indoor our outdoor space with holiday lights..
- INDOOR OUTDOOR DECORATIONS: Works on most open gutters without a gutter guard, shingles up to 1 inch thick, eaves up to 1.5 inches thick..
- ICICLE HOLIDAY LIGHT: Use one clip spaced every 18-24 inches at your desired space. No Ladder Pro clips work exclusively with No Ladder Pro light hanging pole (sold separately)..
Check StockEstwing - E3-LS E3-K Light Weight Shinglers Hatchet, Milled Face And Blue Grip, Silver metallic, 29 oz (Ounces)
- FORGED IN ONE PIECE – The most durable, longest lasting striking tools available.
- HALF HATCHET HEAD – Use cutting edge for splitting wood shakes/shingles.
- VERSATILITY ON THE JOB – Gauge for setting reveal of shingles & blade to trim roofing felt & asphalt shingles.
- PATENTED SHOCK REDUCTION GRIP – Comfortable, durable & reduces impact vibration by 70%.
- MADE IN THE USA – Our tools are proudly crafted in Rockford, IL using the finest American steel.
Check StockEstwing E3-S 32 oz Shingling Hatchet 11-Inch Handle & Shock Reduction Grip
- FORGED IN ONE PIECE – The most durable, longest lasting striking tools available are crafted from a single piece of solid steel and honed into the optimal design for use..
- HALF HATCHET HEAD - Use cutting edge for splitting wood shakes/shingles.
- VERSATILITY ON THE JOB – The built in gauge helps set the reveal of shingles & also has a blade to trim roofing felt & asphalt shingles. The retractable blade is adjustable for 4”, 5”, 5”-5/8” exposure and can be replaced after it dulls..
- PATENTED SHOCK REDUCTION GRIP – Our molded vinyl creates a dimpled handle that is comfortable, durable & reduces impact vibration by 70%..
- MADE IN THE USA – Since 1923, our tools have been proudly crafted in Rockford, IL using only the finest American steel..
Check Stock