Categories

Best Common Anode Module

Level Translator 5V/24V, 8 Channel NPN/PNP to NPN Level Conversion Module, Level Conversion Board, Voltage Level Converter Board 10MHZ

  • 【Convert Input Level Signal】The module can convert input 5V level signal to 24V level signal, or convert input 24V level signal to 5V level signal..
  • 【 Anti-interference】It can also convert signal 5V to 5V, or 24V to 24V level, and isolate input signal and output signal through optocoupler, which can improves anti-interference ability of circuit..
  • 【Set by Dip Switch】Input level can be set by DIP switch, 24V level output is NPN OC output, output current is 100mA..
  • 【Strong Driving Ability】It has conversion and amplification circuit, good wave, strong driving ability..
  • 【PLC Interface Standards】Compatible with a common-cathode or common-anode input connection, matching European and Japanese PLC interface st Plc Interface Standardsandards..
Check Stock

Replacement Anode High Performance (Read Description Before Buy) | Anode Dimensions - See Image 2 | Guaranteed to fit Remington Solar (See 3rd Image) | Copper-Silver(99.95% Pure) | Saves Chlorine

  • ...TS: 95% of customers replace the anode with more than 80% mineral remaining on old anode. Anodes are sacrificial, and designed to degrade. If anode is looking new or barely degraded, Solar ionizer unit is inoperative. Solar ionizer unit will always ionize regardless anode condition, as long it is installed on unit. Common misconception to replace anode to get solar ionizer to function is an INCORRECT PROCEDURE..
  • DO NOT CLEAN ANODE: Any Solar Ionizer automatically cleans the anode during ionization process. Power from solar panel is applied at center of an anode that cannot be cleaned. Cleaning outside an anode with abrasive material(s), will result in NO BENEFITS other than: 1. Frequent anode replacements 2. Significantly increase costs due to wasted mineral ions 3. Damage to solar ionizer unit 4. Time spent on a cleaning procedure that's not needed and not useful..
  • ANODE DIMENSIONS: Refer to 2nd image of this ad. Anode size is optimized to save on chlorine use by maximizing mineral ions in water. IMPORTANT: LARGER DIAMTER ONE INCH ANODE contain impurities that significantly decreases ionization, reduces clearance between coil and anode causing unit not to work....
Check Stock

Oddtone Graphics Card GPU Support Bracket, Adjustable Height GPU Sag Bracket with Magnet & Non-Slip Sheet, GPU Brace for Prevent Universal Graphics Card Sag, L

  • All-aluminum metal material – Provides strong and long-lasting support. This is made of all-aluminum metal instead of plastic, can avoid the aging of plastic materials and can be used as a long-term replacement..
  • Screw adjustment design – The graphics card bracket design can be compatible with various chassis configurations of traditional and long power supply bays to meet various user hosts..
  • Bottom hidden magnet design – The magnet hidden in the base is designed for easy installation and more stable standing in the chassis..
  • The workmanship of the detail process – The small graphics card support frame is made of three complex processes: polished anode, sandblasted anode and CNC high-speed edge-washing high-gloss process. The full anode process can maintain the durability..
  • Tool-free fixing module – The support module is equipped with a cushioning anti-scratch pad and a base high-gloss process..
Check Stock

5mm Super Bright Piranha LED - RGB - Common Anode (Pack of 20)

  • 5mm Super Bright Piranha LED - RGB - Common Anode (Ships from US).
  • Size: 5mm Piranha / Superflux LED, Color: Red/Green/Blue (RGB), Luminosity: 9,000-11,000 mcd.
  • Forward Voltage: R(1.8-3.5) B(3.0-3.5) G(3.0-3.5), Current: 20mA, Wavelength: N/A RGB Common Anode.
  • Viewing Angle: 100-120 Degrees, MountStyle: Through Hole (DIP), Lens Color: Clear.
  • Super bright LEDs, used for mods, RC, adruino, cars, HO Scale models, planes, trucks, adafruit projects, halloween, christmas, PC, Ultra Light, etc....
Check Stock

Mi.Light RGBW LED Strip 2.4GHz RF Wireless 4-Zone Controller Receiver Box DC 12-24V.RGBW Remote,B3 T3 Panel and iBox1 iBox2 Bridge Hub for Smartphone APP Control is All Sold Separately

  • Wireless WiFi control module LED controller for RGBW RGB LED strips.
  • Can be controlled wirelessly by your Mi-Light Remote. Cable connection, for output: common anode.
  • Two power supply modes：1. DC 12-24V 2.Power adapter interface 5.5*2.1mm.
  • Max. Load per route: 6A, total output current 10A.
Check Stock

About Fluid | Aluminum Zinc Flexible Anode Rod KIT for Water Heaters | INCLUDES1-1/16" DEEP WELL SOCKET | Brass Cap | Teflon Tape | 44 Inches Long | GETS RID OF STINKY ROTTEN EGG SMELLING WATER!

  • ... 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw. All you provide is a ½ Inch Ratchet or Breaker Bar, a few common hand tools, a friend and your favorite beverage! (not included)..
  • CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!.
Check Stock

uxcell Common Anode 10 Pin 2 Bit 7 Segment 0.59 x 0.55 x 0.28 Inch 0.35\ Red LED Display Digital Tube 5pcs

  • Panel Size: 15 x 14 x 7.2mm / 0.59" x 0.55" x 0.28" (L*W*H).
  • Total Size: 15 x 14 x 13.5mm / 0.59" x 0.55" x 0.53" (L*W*H).
  • Package Content: 5 x LED Digital Display Tube.
Check Stock

uxcell Common Anode 12Pin 4 Bit 7 Segment 1.98 x 0.75 x 0.31 Inch 0.55\ Red LED Display Digital Tube 5pcs

  • Panel Size: 50.3 x 19 x 8mm / 1.98" x 0.75" x 0.31" (L*W*H).
  • Total Size: 50.3 x 19 x 14.5mm / 1.98" x 0.75" x 0.57" (L*W*H).
  • Package Content: 5 x LED Digital Display Tube.
Check Stock

uxcell Common Anode 12 Pin 3 Bit 7 Segment 1.48 x 0.75 x 0.31 Inch 0.55\ Blue LED Display Digital Tube 5pcs

  • Panel Size: 37.6 x 19 x 8mm / 1.48" x 0.75" x 0.31" (L*W*H).
  • Total Size: 37.6 x 19 x 14.5mm / 1.48" x 0.75" x 0.57" (L*W*H).
  • Package Content: 5 x LED Digital Display Tube.
Check Stock

uxcell Common Anode 12 Pin 3 Bit 7 Segment 1.48 x 0.75 x 0.31 Inch 0.55\ Yellow Green LED Display Digital Tube 5pcs

  • Panel Size: 37.6 x 19 x 8mm / 1.48" x 0.75" x 0.31" (L*W*H).
  • Total Size: 37.6 x 19 x 14.5mm / 1.48" x 0.75" x 0.57" (L*W*H).
  • Package Content: 5 x LED Digital Display Tube.
Check Stock

Gamital GPU Support Bracket Vertical Bloster - Graphics Card Brace GPU Stand Anodized Aluminum Sag Holder VGA Brace Support for All Universal Gaming nVIDIA GeForce GTX AMD Radeon Graphics Card & More

  • ...al XK218 vertical GPU brace is a little different but it is no doubt a great investment. Not only is it very cost performance, but it also does its job exquisitely and holds your GPUs up toughly at the same time without damaging or ruining your aesthetics..
  • 【Segmented Slide Design with Thumbscrews】：The support module is equipped with cushioning scratch-proof pad. Tool-less screws are used for fixing the support module. With a anti-shock rubber sticker base and just easy to move and adjust pads support to hold the GPUs, you’re set and ready to go in a matter of minutes. Compatible with traditional ATX, MATX, ITX and long PSU bracket cases, match various universal computer case and motherboard..
  • 【The Workmanship of the Detail Manufacturing Technique】：The universal VAG graphics card support bracket offer corkscrew spin with a very high force, It is very easy to use, just twist the screw up and lock the Locking Nut, it will work stably. Moreover, this GPU Stand is made of three complex processes: polished anode, sandblasted anode and CNC high-speed edge-washing high-gloss process. The full anode process can maintain the durability..
  • 【The Benefits of Supporting Your Graphics Card Vertically】: Vertical bracket supporting is that it would pre....
Check Stock

DAOKI 10PCS LED Display 7 Segment 1Bit 2Bit 3Bit 4Bit Common Cathode 10PIN Red Light for Arduino,DIY + Jump Wire

  • Type:Common Cathode(Note:5643 Series may be Common Cathode or Common Anode, Be suject to part number).
  • Five different LED Display 7 Segment are available to satisfy your different needs..
Check Stock

www.solarionizer.com Replacement Anode Guaranteed to fit Remington Solar (See Image 3) | Anode Dimensions (See Image 2) | Free: 1 Wing Screw and 1 Basket

  • NOTE TO BUYERS: Competitor(s) posing as "Amazon Customer(s)" are posting false details on Amazon product reviews. (1.) Anode dimensions listed on image (2.) Anode will ONLY fit with heavy duty wing-screw provided with anode for durability (3.) Anode cannot be rotated because thread sizes optimized for durability.
  • GUARANTEED TO FIT REMINGTON SOLAR IONIZER - See image 3: Anodes have been tested and guaranteed to fit the ionizer unit. One end of anode fits the ionizer unit and other end fits the Wingscrew supplied with anode..
  • PREMATURE ANODE REPLACeMENTS: 95% of customers replace an anode with more than 80% of the anode remaining. CONTACT HILLTOP SOLAR customer service to inquire if anode replacement is needed, prior to purchasing an anode. WE SAVE YOU MONEY!!.
  • DO NOT CLEAN ANODE: Any brand of Solar Ionizer unit automatically cleans the anode during ionization process. Power from a solar ionizer is applied at center of anode that cannot be cleaned. Cleaning on outside of an anode with any abrasive materials, will result with NO BENEFITS other than: 1. Frequent anode replacements 2. Significantly increase costs ....
Check Stock