Categories

Best Common Model Choke

BRAND NEW HOLLEY 600 CFM QUICK FUEL BRAWLER STREET CARBURETOR,RED BILLET BLACK FINISH,MECHANICAL SECONDARIES,ELECTRIC CHOKE,4150 MODEL,COMPATIBLE WITH GASOLINE

  • Brand New Quick Fuel 600 CFM Brawler Street Carburetor with Mechanical Secondaries, Electric Choke, 4150 Model, Compatible with Gasoline (Part #BR-67316).
  • Brawler continues to lead the pack with their newest family of carburetors in a black with red billet color combination. While the look is new, the out of the box performance is the same that you have come to expect from Brawler..
  • Brawler Street carburetors come with red billet metering blocks with the latest technology in air/fuel calibrations for modern day street or race engine demands. They also come with red billet throttle bodies for superior durability & throttle shaft stability. Brawler Street models offer all of the options & tunability that you would find from more expensive carburetors in the market, including an electric choke, a beautiful finish & 4-corner idle adjustment on all mechanical secondary models..
  • Specs: Barrels: 4 | Billet Color: Red | Booster: Down Leg | Brand: Brawler | CFM: 600 | Choke: Electric | Circuit: 2 | Finish: Black | Fuel: Gas | Fuel Inlet: Dual | Fuel System: Carbureted | High Speed Air Bleed: 28:28 | Idle Air Bleed Size: 70:70 | Marine Use: No | Material: Aluminum | Model: Brawler Street | Primary Main Jet: 66 | Primary Power Valve: 6.5 | Product Type: Carburetor....
Check Stock

Powtol XT675 14 853 68-S Carburetor with Gasket Fuel Filter for Kohler XT650 XT6.5 XT6.75 Engine Toro MTD Auto Choke Lawn Mower

  • Carburetor replace # 14 853 68-S 14 853 55-S 14 083 15-S.
  • Fits Model: Kohler XT650 XT675 XT6.5 XT6.75 Engines.
  • Fits specific engines on Lawn Boy, Toro & MTD Models.
  • Fits for Engines That Do Not Have A Vacuum Choke Pull Off(Auto Choke),12mm STD choke without shutoff.
  • Including 1 carburetor,2 gasket,1 fuel filter.
Check Stock

Edelbrock 1406 Performer 600 CFM Square Bore 4-Barrel Air Valve Secondary Electric Choke Carburetor

  • Brand New Quick Fuel 650 CFM Brawler Diecast Carburetor with Mechanical Secondaries, Electric Choke, 4150 Model (Part #BR-67255).
  • Features: Dual inlet fuel bowls with sight glass windows for safe and easy float adjustments | Electric choke for easy starting in colder climates.
  • Brawler diecast carburetors are machined and assembled by craftsman right here in the USA. These carburetors work hard just as their name implies - just raw bare knuckled performance that you can rely on. Do not let the budget-friendly price fool you, the Brawler development focused on the performance you want and not the pretty box that it comes in. Brawlers come with the latest technology in air/fuel calibrations for current day street engine demands..
  • The Brawler family of diecast carburetors are all made from light-weight diecast aluminum components and are available in both vacuum and mechanical secondary models. They offer all the tunability and options that you would find from more expensive carburetors in the market, including a beautiful appearance, electric choke, and four-corner idle adjustment on all mechanical secondary models..
Check Stock

BOJACK 15 Values 160 Pcs Inductor 10 uH to 20 mH DIP Radial Power Choke Inductors Assortment Kit

  • Small vertical inductors occupy less space..
  • The inductor coil is protected with PVC or UL tube to ensure stable performance.
  • This choke inductor has special guide pin structure.
  • Not easy to produce open circuit phenomenon.
  • The choke coil inductors are of small distributed capacitance and high self-resonance frequency.
  • Include：10uh, 1uh, 33uh, 2.7mh, 100uh, 4.7uh, 150uh, 10mh, 1mh, 220uh, 15uh, 20mh 15model, Packed in A plastic storage case.
Check Stock

NEW HOLLEY STREET DEMON CARBURETOR,SHINY,625 CFM,4 BARREL,ELECTRIC CHOKE,GASOLINE ONLY,VACUUM SECONDARIES

  • Brand New Holley 625 CFM Street Demon Carburetor, with Electric Choke & Vacuum Secondaries (Part #1900).
  • Specs: Barrels: 4 | Booster: Triple Stack | Brand: Demon | CFM: 625 | Choke: Electric | Emission Code: 3 | Finish: Shiny | Fuel: Gasoline | Fuel Inlet: Single.
  • Material: Aluminum | Metering Rod Size: 60/52 | Model: Street Demon | Primary Main Jet: 80 | Primary Pump Nozzle Size: 31 | Product Type: Carburetor | Secondaries: Vacuum | Secondary Main Jet: 80 | Step up Spring: Green | Supercharged Application: No | Vacuum Ports: 1 timed (spark) port, 2 full, and 1 PCV port.
  • Wicked Power! The all new Street Demon redefines the street carburetor with clean looks and ease of use! The Street Demon offers enthusiasts a straight forward carburetor designed to deliver a stable idle, amazingly crisp throttle response and smooth performance. Its optimized calibration and dual mounting pattern make it run-ready for a large variety of engines and vehicles!.
  • NOTE: This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #193....
Check Stock

The Total Gun Manual: 335 Essential Shooting Skills

  • 30 YEARS WORTH OF PATTERNS: No other company like ours at Carlson's Choke Tubes with 30 plus years of experienced patterning and testing data, by analyzed thousands of load and choke combos with our proprietary software. We bring you the best and most accurate aim choke tubes for your hunting needs..
  • HIGH-QUALITY MANUFACTURED: Our high quality Rifled for Beretta Benelli Mobil is made of high quality Stainless Steel. These precision Rifled Choke Tubes are manufactured from 304 high stress stainless steel. Each choke tube protrudes .625 to 1.3 inches from the end of the barrel depending upon which type of firearm the choke tube has been specifically designed for..
  • HIGH PERFORMANCE: Carlson's Choke Tubes Rifled for Beretta Benelli Mobil 12 Gauge constricted at Rifled and measured at 0.73 diameter..
  • LIFETIME WARRANTY: We back all of our choke tubes with our lifetime warranty so you can focus on busting clays and filling bag limits..
  • MADE IN THE USA: All our Carlson's Choke Tubes are made, right here, in the United States..
Check Stock

Iglobalbuy 50cc/ 80ccBicycle Engine Kit 2-Stroke Cycle Petrol Gas Motor Engine Kit for Motorized Bicycle 26\/28\ Bike (black) (80cc)

  • The 2-stroke petrol engine mixing Ratio of Fuel(90#) and Engine Oil: 16: 1 for New sets, 20: 1 after Running 500Km..
  • This 50cc/80cc bicycle engine easy to install. The rider only needs some basic hardware skills, tools, and fine tuning adjustments (Note: Seller is not responsible for misuse or this kit or any warranty after installation)..
  • Fits Most 26"&28'' Wheeled Bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1")..
  • To start the 2-stroke engine, move the choke lever to "on" position, hold in clutch, pedal the bike to get some speed, and then release the clutch gradually..
  • To stop the 2-stroke engine, choke the carburetor completely with the lever on the carburetor. Alternatively, slow speed, hold in clutch and press the kill switch on twist-grip throttle.6. If you want to use your bicycle as a common bike, just disengage clutch, then press the silver button at the side of clutch, the motor will not be started..
Check Stock

NEW HOLLEY STREET DEMON CARBURETOR,BALL-BURNISHED SHINY ALUMINUM WITH BLACK COMPOSITE FUEL BOWL,625 CFM,4 BARREL,ELECTRIC CHOKE,GASOLINE ONLY,VACUUM SECONDARIES

  • ... make it Run-Ready for a large variety of engines and vehicles..
  • Specs: Barrels: 4 | Booster: Triple Stack | Brand: Demon | CFM: 625 | Choke: Electric | Condition: New | Emission Code: 3 | Finish: Shiny | Fuel: Gasoline | Fuel Inlet: Single | Marine Use: No.
  • Material: Aluminum / Composite | Metering Rod Size: 60/52 | Model: Street Demon | Primary Main Jet: 80 | Primary Pump Nozzle Size: 31 | Product Type: Carburetor | Secondaries: Vacuum | Secondary Main Jet: 80 | Step up Spring: Green | Supercharged Application: No | Vacuum Ports: 1 timed (spark) port, 2 full & 1 PCV port.
  • NOTE: This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932..
Check Stock

HOLLEY QUICK FUEL BRAWLER CARBURETOR,600 CFM,4150,4 BARREL,ELECTRIC CHOKE,VACUUM SECONDARIES

  • Brand New Quick Fuel 600 CFM Brawler Diecast Carburetor with Vacuum Secondaries, Electric Choke, 4150 Model (Part #BR-67270).
  • Features: Performance upgrade for stock to mildly modified V-8 engines | Calibrated for excellent street performance right out of the box | Factory preset electric choke for easy startups | Vacuum secondaries for use on wide variety of vehicles | Single feed fuel inlet for easy installation | Integrated 700R4/200R4 transmission kick down cable mounting | Changeable Air Bleeds | Adjustable Needle and Seats.
  • Brawler die-cast carburetors are now available in a side hung bowl design. With a simpler one-fuel line connection, these new carburetors are a perfect fit for bolt on street performance. The carburetors are equipped with universal throttle levers to accommodate Ford A/T kickdown, GM 700 R4 mounting holes, and ability to mount brackets for Chrysler vehicles..
  • Brawler diecast carburetors are machined and assembled by craftsman right here in the USA. These carburetors work hard just as their name implies - just raw bare knuckled performance that you can rely on. Do not let the budget-friendly price fool you, the Brawler development focused on the performance you want and not the pretty box that it comes in. Brawlers come with the....
Check Stock

CARLSON'S Choke Tubes 12 Gauge for Winchester - Browning Inv - Moss 500 [ Rifled | 0.730 Diameter ] Blued Steel | Rifled Choke Tube | Made in USA

  • 30 YEARS WORTH OF PATTERNS: No other company like ours at Carlson's Choke Tubes with 30 plus years of experienced patterning and testing data, by analyzed thousands of load and choke combos with our proprietary software. We bring you the best and most accurate aim choke tubes for your hunting needs..
  • HIGH-QUALITY MANUFACTURED: Our high quality Rifled for Winchester - Browning Invector - Moss 500 is made of high quality Stainless Steel. These precision Rifled Choke Tubes are manufactured from 304 high stress stainless steel. Each choke tube protrudes .625 to 1.3 inches from the end of the barrel depending upon which type of firearm the choke tube has been specifically designed for..
  • HIGH PERFORMANCE: Carlson's Choke Tubes Rifled for Winchester - Browning Invector - Moss 500 12 Gauge constricted at Rifled and measured at 0.73 diameter..
  • LIFETIME WARRANTY: We back all of our choke tubes with our lifetime warranty so you can focus on busting clays and filling bag limits..
  • MADE IN THE USA: All our Carlson's Choke Tubes are made, right here, in the United States..
Check Stock

Carlson's Choke Tubes Remington Delta Waterfowl Choke 3 Pack Set 12ga, Black (07269)

  • Our Waterfowl Extended Choke Tubes are manufactured from 17-4 stainless steel and designed to throw tighter and denser patterns than conventional choke tubes.
  • These choke tubes feature a 25% longer parallel section in the choke, thus throwing more consistent patterns.
  • Each choke tube is knurled on the end to allow for quick and easy removal.
  • This 3 pack set includes the close-range, mid-range and long range choke tubes with case.
Check Stock

Cnfaner Carburetor for Kohler K321 K341 Cast Iron 14hp 16hp Tractor Cast Iron Engine Carb with k341 Gasket kit

  • Replace Part Number: 45-053-55,4505355,45-053-55-S.
  • Replacement for Kohler K321 K341 Carburetor. This carburetor is made from cast aluminum and install easily onto your K Engine..
  • 30mm/1.2" Throttle Bore,Choke Shaft Included..
  • Carburetor for Kohler K341 K321 ,for Club Cadet 1600 1650 ,14HP and 16HP Cast Iron Engines,for John Deer Tractor 214, 300, 312, 314 & 316..
  • Please look carefully at the choke lever in the photo. We call this Choke Lever Style 1. This style choke lever is commonly used on equipment where you manually choke the engine (for Rototiller, Chipper, etc.) or the choke cable comes from above the carburetor and connects directly to the choke (fits for some John Deere Garden Tractors)..
Check Stock

CARLSON'S, Remington White Wing Dove Choke Tube, 20 Gauge, Extended Range, Improved Modified, Diameter .705, 37523

  • 30 YEARS WORTH OF PATTERNS: No other company like ours at Carlson's Choke Tubes with 30 plus years of experienced patterning and testing data, by analyzed thousands of load and choke combos with our proprietary software. We bring you the best and most accurate aim choke tubes for your hunting needs..
  • HIGH-QUALITY MANUFACTURED: Our high quality White Wing Dove for Remington is made of high quality Stainless Steel. Our White Wing Dove choke is manufactured from 17-4 stainless steel and has been designed to produce the best patterns for dove hunters..
  • HIGH PERFORMANCE: Carlson's Choke Tubes White Wing Dove for Remington 20 Gauge constricted at Improved Modified and measured at 0.595 diameter..
  • LIFETIME WARRANTY: We back all of our choke tubes with our lifetime warranty so you can focus on busting clays and filling bag limits..
  • MADE IN THE USA: All our Carlson's Choke Tubes are made, right here, in the United States..
Check Stock