Categories

Best Common Rail Nozzles

Hardened Steel Nozzle 0.4 mm/ 1.75 mm 3D Printer MK8 Nozzles Tool High Temperature Wear Resistant Compatible with Makerbot Creality CR-10 All Metal Hotend Ender 3/ Ender3 pro Prusa i3 5 Pieces

  • Durable material: MK8 extruder nozzles are made of hardened tool steel, good abrasion resistance, heat resistance and corrosion resistance, sturdy....
  • Good performance: this hardened tool steel nozzle has higher toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but....
  • High precision: the inner wall of the MK8 nozzles is smooth and has no burrs, the viscosity coefficient is small, extruder nozzle diameter error less....
  • Compatibility: these 3D printer nozzles compatible with MK8 hotend for Creality 3D printers, such as Ender-2/ Ender-3/ Ender-3 pro/ Ender-5, also....
  • What you get: package comes with 5 pieces of black MK8 nozzles, the size is 0.4 mm, sufficient quantity to facilitate your timely replacement,....
Check Stock

High Speed Comparator High Speed Frequency Meter Front Shaping Comparator for Low-Voltage Applications Conversion Circuit

  • LOW VOLTAGE APPLICATIONS -- The input common mode range is better than the swing input, which is very suitable for low voltage applications..
  • APPLICATION -- Digital module can be used for wide voltage range and periodic signal shaping..
  • FRONT END ADJUSTMENT -- Used as a front end conditioning module in time domain measurements for frequency and phase difference..
  • PARAMETER -- The input voltage is 10 to 1000mV, the input frequency is about 200MHz DC, and the input impedance is 50 ohms..
  • RAIL TO RAIL OUTPUT -- The output level mode is rail to rail output, which can directly drive TTL / CMOS level..
Check Stock

CZH-LABS DIN Rail Mount 12 Amp Solid State Relay SSR Module in 4~32VDC Out 100~240VAC 1 Channel

  • MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated)..
  • Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode..
  • Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 12 Amp. Isolation: Phototriac. Zero cross: Yes..
  • Dual input terminal block, you can flexibility to configure the input control mode: Individual / Common Positive / Common Negative..
  • DIN rail mount, Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm....
Check Stock

Juried Engineering Microchip MCP602-I/P MCP602 Dual Operational Amplifier Op-Amp 2.8MHZ 2.3V/us DIP-8 Breadboard-Friendly (Pack of 5)

  • The MCP602 operational amplifiers (op amps) utilize an advanced CMOS technology, which provides low bias current, high speed operation, high open-loop gain and rail-to-rail output swing..
  • Specifications rated from 2.7V to 5.5V supplies, Rail-to-rail swing at output.
Check Stock

Juried Engineering Microchip MCP602-I/P MCP602 Dual Operational Amplifier Op-Amp 2.8MHZ 2.3V/us DIP-8 Breadboard-Friendly (Pack of 4)

  • The MCP602 operational amplifiers (op amps) utilize an advanced CMOS technology, which provides low bias current, high speed operation, high open-loop gain and rail-to-rail output swing..
  • Specifications rated from 2.7V to 5.5V supplies, Rail-to-rail swing at output.
Check Stock

Composite Carbide Sandblaster Nozzle Tip: 3/32' ID, Longer-Lasting than Tungsten & Boron Blasting Nozzles

  • SUPER COMPOSITE CARBIDE: Experience one of the longest lasting materials used in a sandblaster nozzle at a fraction of the price. The composite carbide lasts much longer than Ceramic, Tungsten Carbide & even Boron Carbide..
  • LONG-LASTING NOZZLES SAVE $: Composite carbide sandblaster nozzles are known to outlast all other types. These are estimated to last up to 1000x ceramic, 50x times tungsten carbide, 5x times boron carbide..
  • 3/32" ID BORE DIAMETER: Our medium size is most common, especially for blasting both fine & course abrasive grits inside a cabinet. Shape: standard tapered nozzle tip which is great for for most pressure pot sandblaster nozzle holders..
  • PREMIUM SANDBLASTER NOZZLE: Made of a hard, compacted, specially formulated carbides weighting about 30 grams! Holds up to aggressive abrasive like aluminum oxide and silicon carbide. Has an estimated service life of up to 1,000+ hours with aluminum oxide abrasive!.
  • WEAR RESISTANCE CARBIDE: Get better performance with low-wear nozzles and save money in the long run! 100% SATISFACTION GUARANTEE or your money back. Please contact us if you feel it didn't last..
Check Stock

JESSINIE 3Pcs MCP6022 Amplifier Module CJMCU-622 Microphone Sound Sensor Module 3V 10MHz Rail-to-Rail Operational Amplifier Module High Performance Rail-torail Input Output OP Amps

  • The MCP602 operational amplifiers (op amps) utilize an advanced CMOS technology, which provides low bias current, high speed operation, high open-loop gain and rail-to-rail output swing..
  • Specifications rated from 2.7V to 5.5V supplies, Rail-to-rail swing at output.
Check Stock

Extreme Max 3005.4408 Downrigger Mounting Plate for Use with Track System Mounts

  • Provides a secure attachment point between your downrigger and track- or rail-base.
  • Includes mounting patterns for common downriggers, including Cannon, Big Jon, Scotty, and more.
  • Includes hardware for attachment between the plate and rail/track base, as well as plate and downrigger.
  • Includes mounting plate and hardware only, base sold separately.
Check Stock

Cordless 2 Inch Faux Wood Blind - Custom Made - White and Printed Real Grain Colors (18' Thru 23 7/8' - 10' Thru 35 7/8')

  • CAUTION- the most common error when ordering blinds is reversing the WIDTH (horizontal – right to left) and LENGTH (Vertical – Top to Bottom). Once you complete your purchase you will receive an email from our Customer Care Department confirming your order, which will include the color and measurements you ordered. Please review this message and make sure that all the information is correct, if not contact us immediately and we’ll be pleased to make any necessary adjustments..
  • Head Rail made of steel (others are made from flimsy aluminum) 1 ½” High x 2” Deep - Rectangular Bottom Rail - 3 ¼” Decorative Royal Crown Valance.
  • Cordless with a Wand Tilt - Compliant with ANSI WCMA Safety Standard Improvements.
  • Smooth Operation: Simply pull on the bottom rail to lower and to raise, guide the blind into the desired location by gently lifting the bottom rail..
Check Stock

Cordless 2 Inch Faux Wood Blind - Custom Made - White and Printed Real Grain Colors (54' Thru 59 7/8' - 36' Thru 47 7/8')

  • CAUTION- the most common error when ordering blinds is reversing the WIDTH (horizontal – right to left) and LENGTH (Vertical – Top to Bottom). Once you complete your purchase you will receive an email from our Customer Care Department confirming your order, which will include the color and measurements you ordered. Please review this message and make sure that all the information is correct, if not contact us immediately and we’ll be pleased to make any necessary adjustments..
  • Head Rail made of steel (others are made from flimsy aluminum) 1 ½” High x 2” Deep - Rectangular Bottom Rail - 3 ¼” Decorative Royal Crown Valance.
  • Cordless with a Wand Tilt - Compliant with ANSI WCMA Safety Standard Improvements.
  • Smooth Operation: Simply pull on the bottom rail to lower and to raise, guide the blind into the desired location by gently lifting the bottom rail..
Check Stock

Juried Engineering Microchip MCP602-I/P MCP602 Dual Operational Amplifier Op-Amp 2.8MHZ 2.3V/us DIP-8 & DIP Sockets with Machined Round Contact Pins Holes 2.54mm Breadboard-Friendly (1 Pair)

  • The MCP602 operational amplifiers (op amps) utilize an advanced CMOS technology, which provides low bias current, high speed operation, high open-loop gain and rail-to-rail output swing..
  • Specifications rated from 2.7V to 5.5V supplies, Rail-to-rail swing at output.
Check Stock

Vaunn Deluxe Bathroom Safety Toilet Rail - Adjustable Toilet Safety Frame - Medical Handrail Assist Grab bar Handle Gray

  • ... bathroom toilet safety frame rail provides a stable support for users to sit or rise from all commodes and toilets. Ideal for seniors, elderly, handicapped or those with arthritis, limited mobility and/or those recovering from injury/surgery. The Vaunn medical safety toilet rail prevents accidental slips or falls, common in the bathroom..
  • DURABLE & STURDY SUPPORT – Our reliable ADA compliant toilet safety frame is engineered with bathroom safety mind. This high-strength and heavy duty toilet rail features metal steel frames to support the user’s weight up to 300 lbs. Anti-slip padded grab bars ensure a firm and secure grip..
  • EASY TO USE – Works with all types of commodes and toilets (i.e. round, elongated toilet, single-piece etc.) Can also be used in other parts of the house (i.e. living room, kitchen, and bedroom.).
  • ADJUSTABLE HEIGHT - The height of the medical toilet safety frame rail adjusts between 26.5” to 33” inches to accommodate the varying needs of its users. It will work on an RV toilet too.
  • NO TOOLS REQUIRED - No installation necessary. No added fixtures to adjust. Simply center Toilet Safety Frame around your existing toilet bowl. Additionally, the Vaunn toilet rail is portable and folds easily for storage and convenience..
Check Stock

Expandable Garden Hose 100 ft Jaopec Water Hose, Collapsible Hose with 10 Function Spray Nozzle, Lightweight and Kink-Free Flexible Shrinking Hose, Durable 3/4 inch Solid Brass Fittings 5-Layer Latex

  • ...tic joints, with excellent corrosion resistance and no rust. Sturdy fittings and a high-strength polyester fabric cover help you get rid of common pipe leaks, cracks, rust and more. Jaopec water hose service life is 100% longer than the ordinary hose..
  • 【10 Functional Hose Nozzle】Compared to common 8 pattern hose nozzles, our 10 patterned nozzles are better to meet all your watering and washing needs. Even includes a water pressure valve attachment, easily adjusting the pressure or shutting it off. The ergonomic rubber handle makes this sprayer very comfortable to hold and also prevents slipping..
  • 【3 Times Extension in Length】Retractable hose quickly expands to 3 times its original length when water pressure is turned on, can extend from 33 feet to 100 feet in length (ensures adequate water pressure 4-12 bar), and retracts to original in minutes when closed length. Only 4.9 LBS, it is incredibly light, flexible, foldable, and comes with a storage bag and hook for easy storage..
  • 【Multiple Purposes & Great Gift】The kit contains a garden hose 100ft, 10 functional nozzles, a hook, three rubber gaskets, storage bags, and a water tape. An extensive hose set meets all your needs at once, making work and domestic chores easier than ever. This collaps....
Check Stock