Air Venturi Intermount Fits Benjamin Sheridan Multi-Pump Rifles
- Custom-machined intermount & Picatinny rail.
- Fits Benjamin 397/392 and Sheridan multi-pump rifles.
- Easily slips on the receiver, spanning the pellet-loading area.
- 2-piece intermount mounts on receiver & included Picatinny rail attaches to the intermount.
- Includes 2-piece aluminum intermount, 2 steel screws and Picatinny rail.
Check Stock3L Manual Transmission Fluid Pump Oil Filling Filler System Fluid Transfer Pump Tool with Adapters
- ◇ Use to dispense and extract the ATF fluid of vehicles. Provide with pneumatic operation. With volume guide for controlling fluid more easily.
- ◇ Car fluid pump transmission fill kit includes a 3-liter fluid container with pump handle lid, a pressure gauge, a pressure-release cap, a tube and 8 transmission fluid adapters for the most common vehicles.
- ◇ With an air compressor, the pump extract fluids in minutes. The 3L pneumatic fluid extractor ensures high extraction speed and automatically dispenses.
- ◇ This transmission pump can be used for pressurized fills like engine coolant, motor oil, brake or power steering fluid.
- Transmission fluid pump transfer system is a money saver for the DIY mechanic’s tool kit.
- ◇ Applicable to common car brands in the market, please see the picture for specific applicable car brands.
Check StockHigh Speed Comparator High Speed Frequency Meter Front Shaping Comparator for Low-Voltage Applications Conversion Circuit
- LOW VOLTAGE APPLICATIONS -- The input common mode range is better than the swing input, which is very suitable for low voltage applications..
- APPLICATION -- Digital module can be used for wide voltage range and periodic signal shaping..
- FRONT END ADJUSTMENT -- Used as a front end conditioning module in time domain measurements for frequency and phase difference..
- PARAMETER -- The input voltage is 10 to 1000mV, the input frequency is about 200MHz DC, and the input impedance is 50 ohms..
- RAIL TO RAIL OUTPUT -- The output level mode is rail to rail output, which can directly drive TTL / CMOS level..
Check StockCZH-LABS DIN Rail Mount 12 Amp Solid State Relay SSR Module in 4~32VDC Out 100~240VAC 1 Channel
- MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated)..
- Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode..
- Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 12 Amp. Isolation: Phototriac. Zero cross: Yes..
- Dual input terminal block, you can flexibility to configure the input control mode: Individual / Common Positive / Common Negative..
- DIN rail mount, Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm....
Check StockFleece Performance Emissions Compliant CP3 Conversion Kit & Pump FPE-LML-CP3-FF-EO Compatible with 2011-2016 Chevy Silverado/GMC Sierra 2500HD 3500HD 6.6L LML Duramax Diesel
- Convert your 2011-2016 Duramax feet s fuel system from a CP4 to a CP3 high pressure pump and get performance and peace-of-mind. Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms. Our newest kit includes all of the hardware necessary to replace the troublesome CP4 with a CP3 and requires no tuning changes and maintains all factory emissions controls..
- CP3 Pump Billet CP3 Engine Block Adaptor High Pressure Fuel Rail Line Low Pressure Fuel Feed Line Return Fuel Hose.
- CP3 Feed Hose Fuel Rail Nut (3) CP3 Block Adapter Bolts (Flange Head, M8x1.25x35mm).
- CP3 Pump Fittings 3/8 inch CP3 Pump Fittings 1/2 inch (2) 12mm Sealing Washers.
Check StockJuried Engineering Microchip MCP602-I/P MCP602 Dual Operational Amplifier Op-Amp 2.8MHZ 2.3V/us DIP-8 Breadboard-Friendly (Pack of 5)
- The MCP602 operational amplifiers (op amps) utilize an advanced CMOS technology, which provides low bias current, high speed operation, high open-loop gain and rail-to-rail output swing..
- Specifications rated from 2.7V to 5.5V supplies, Rail-to-rail swing at output.
Check StockJuried Engineering Microchip MCP602-I/P MCP602 Dual Operational Amplifier Op-Amp 2.8MHZ 2.3V/us DIP-8 Breadboard-Friendly (Pack of 4)
- The MCP602 operational amplifiers (op amps) utilize an advanced CMOS technology, which provides low bias current, high speed operation, high open-loop gain and rail-to-rail output swing..
- Specifications rated from 2.7V to 5.5V supplies, Rail-to-rail swing at output.
Check StockNerf Super Soaker Scatter Blast
- This powerful, pump-handle blaster features a five-nozzle blast to deliver five streams of water at your target!.
- Use the flip-up sight to perfect your aim and the tactical rail to ready your shot..
- Then, pump the handle and unleash your multiple streams of water to douse your unsuspecting opponents up to 25 feet away!.
- Pump-handle water blaster delivers five streams of water at once to soak your target to the max!.
- Water blaster sends streams up to 25 feet away!.
Check StockJESSINIE 3Pcs MCP6022 Amplifier Module CJMCU-622 Microphone Sound Sensor Module 3V 10MHz Rail-to-Rail Operational Amplifier Module High Performance Rail-torail Input Output OP Amps
- The MCP602 operational amplifiers (op amps) utilize an advanced CMOS technology, which provides low bias current, high speed operation, high open-loop gain and rail-to-rail output swing..
- Specifications rated from 2.7V to 5.5V supplies, Rail-to-rail swing at output.
Check StockLansinoh TheraPearl Breast Therapy Pack, Breastfeeding Essentials, 2 Pack
- Lansinoh TheraPearl 3-in-1 Breast Therapy packs provide therapeutic relief for the most common breastfeeding challenges.
- Cold Therapy: relieves engorgement, swelling and pain, common challenges during the early days of nursing.
- Hot Therapy: relieves plugged ducts and mastitis and encourages milk let-down during breastfeeding.
- Breast Pump Aid: heat and wrap around breast pump flange to encourage milk let-down and reduce time spent pumping.
- TheraPearl 3-in-1 Breast Therapy Packs can be stored in the refrigerator or freezer, are microwave safe, and BPA and BPS free.
Check StockExtreme Max 3005.4408 Downrigger Mounting Plate for Use with Track System Mounts
- Provides a secure attachment point between your downrigger and track- or rail-base.
- Includes mounting patterns for common downriggers, including Cannon, Big Jon, Scotty, and more.
- Includes hardware for attachment between the plate and rail/track base, as well as plate and downrigger.
- Includes mounting plate and hardware only, base sold separately.
Check StockCordless 2 Inch Faux Wood Blind - Custom Made - White and Printed Real Grain Colors (18' Thru 23 7/8' - 10' Thru 35 7/8')
- CAUTION- the most common error when ordering blinds is reversing the WIDTH (horizontal – right to left) and LENGTH (Vertical – Top to Bottom). Once you complete your purchase you will receive an email from our Customer Care Department confirming your order, which will include the color and measurements you ordered. Please review this message and make sure that all the information is correct, if not contact us immediately and we’ll be pleased to make any necessary adjustments..
- Head Rail made of steel (others are made from flimsy aluminum) 1 ½” High x 2” Deep - Rectangular Bottom Rail - 3 ¼” Decorative Royal Crown Valance.
- Cordless with a Wand Tilt - Compliant with ANSI WCMA Safety Standard Improvements.
- Smooth Operation: Simply pull on the bottom rail to lower and to raise, guide the blind into the desired location by gently lifting the bottom rail..
Check StockCordless 2 Inch Faux Wood Blind - Custom Made - White and Printed Real Grain Colors (54' Thru 59 7/8' - 36' Thru 47 7/8')
- CAUTION- the most common error when ordering blinds is reversing the WIDTH (horizontal – right to left) and LENGTH (Vertical – Top to Bottom). Once you complete your purchase you will receive an email from our Customer Care Department confirming your order, which will include the color and measurements you ordered. Please review this message and make sure that all the information is correct, if not contact us immediately and we’ll be pleased to make any necessary adjustments..
- Head Rail made of steel (others are made from flimsy aluminum) 1 ½” High x 2” Deep - Rectangular Bottom Rail - 3 ¼” Decorative Royal Crown Valance.
- Cordless with a Wand Tilt - Compliant with ANSI WCMA Safety Standard Improvements.
- Smooth Operation: Simply pull on the bottom rail to lower and to raise, guide the blind into the desired location by gently lifting the bottom rail..
Check Stock