Categories

Best Communication Connector

AEM 30-3511 Infinity 6/8h Plug in Play Jumper Harness for 2003-2005 Mitsubishi Lancer Evolution / EVO 8 VIII

  • AEM’s Plug & Play harness for Mitsubishi Evo engines includes a Wideband O2 connector, AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, oil temperature and ethanol content sensor..
  • The expansion port also includes a sensor ground, 5v reference, 12v power from relay and high side output for activating a relay or solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift..
Check Stock

HYCLAT Red 2-4 Gauge 175 A Battery Quick Connect/Disconnect Wire Harness Electrical Motors Plug Connector Recovery Winch Trailer (4 Pack)

  • The quick connect plug is suitable for electric vehicle, UPS communication power supply, electric machine, electric forklift, the power equipment, etc.
  • Allows for quick connect/disconnect of power from winches, trailers or other electrical devices.
  • Package include: 2x connector ends, 4x terminal pins.
  • Quick connector set from Driver Recovery Products. Provides simple and convenient method for disconnecting power to a winch or other electrical device such as remote battery chargers, trailers, or for any purpose requiring a high-current, quick-disconnect connector.
Check Stock

Antrader 3-Pack 60mm x 60mm x 15mm 6015 12V Brushless DC Cooling Fan 2pin for DIY 3D Printer Extruder Humidifier

  • 3 Pack high quality brushless 6015 DC 12V fan, sleeve-bearing design cooling cooler..
  • Plastic construction 9 blade fan. Dual Ball Bearing.
  • DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.1A.
  • 40 x 40 x 10mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.560 x 60 x 15mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • Compact motor design for computer case 60mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
Check Stock

Triplett Byte Brothers Basic Telephone Test Set / Butt Set RJ11 Adapter (BSX200)

  • Basic Butt Set handles the most critical requirements.
  • Functions include dial tone, dial out, caller ID, last number redial, on/off hang-up button, flash button, DTM and FSK support.
  • Offers three ways to connect to the line: an RJ11 connector, high quality alligator clips, and a type 66 adapter.
  • Includes RJ11 to Alligator clips adapter, RJ11 to Type 66 block connector, RJ11 coupler, and carrying pouch.
Check Stock

KEYESTUDIO Mega Plus 2560 R3 Board for Arduino with Type-C USB Cable, 1.5A Output, More Powerful MCU Contoller Board

  • This Mega Plus board can work like the Arduino Mega R3 2560 but it is more powerful and has more pins.
  • The USB-to-Serial chip of this board is stable and compatible CP2102.
  • Up to 5V, 1.5A output, can drive drive high-current devices like servo and motor.
  • Additional SPI communication interface, IIC communication interface, Serial communication interface(4 channel).
  • Serial2 (D17 is RX2, D16 equals to TX2), Serial3 (D15 is RX3, D14 is TX3), D0 and D1 are connected to MCU.
  • The yellow text on black board makes identifying pinsets a breeze. FCC and CE is available.
  • How to use: Search for "keyestudio wiki KS0499" in Google Chrome to get the wiki online tutorial for this product. Technical supports are available at any time!.
Check Stock

Autel MaxiSYS VCI100 Compact Bluetooth Vehicle Communication Interface Wireless Diagnostic Interface Vehicle Diagnostic Connector Support Autel MS906BT MK906BT Tablet

  • 【Diagnostic Connector】The wireless diagnostic interface MaxiVCI V100 is a small interface box used to connect to a vehicle's diagnostic connector....
  • 【Wireless Bluetooth Technology】MaxiSYS VCI100 features convenient wireless Bluetooth technology enabling tech to perform diagnostics outside of....
  • 【Comprehensive Diagnosis】MaxiVCI V100 diagnostic connector supports comprehensive diagnosis and reading of control modules..
  • 【Fast ECUs communication】The MaxiVCI V100 Compact Bluetooth can communicate with vehicles' electronic control units (ECUs), guaranteeing....
  • 【PLEASE NOTE】This MaxiSYS VCI100 Wireless Bluetooth Diagnostic Interface only work for Autel MaxiSys MS906BT and Autel MK906BT. If meet any....
Check Stock

wlaniot 2.4G Wireless Mini PCI PCI-E WiFi Bluetooth Internal Antenna Built-in Antenna (5dbi,700-2600Mhz,U.FL/IPX Connector,RG178 Cable 4inches) 2pcs

  • ...idth). As client antenna: Connect to an access point in any direction. Designed for wireless 802.11ac and other Dual Band 2.4GHz / 5.8 GHz applications. Omni-directional direct connect antennas tuned to perform on 2.4 & 5.8 GHz networks..
  • Vertically polarized and suitable for many of today’s machine to machine and communication applications such as telemetry, remote monitoring and mesh networking applications..
  • Sends WiFi / wireless signal high and low enough to reach 2 levels of a building. Omni dipole antenna: Radiates signal with a beam of 360 degrees.
  • also receives signal from 360 degrees around it Mounts directly onto RP-SMA-female or SMA-female connector of radio or client device Bottom section of "right angle" version has articulating angle that can be adjusted to 90-degrees or other angle. The versions with an all-brass base (connector section) are waterproof / weatherproof rated IP65..
  • Product name:5.8G Omnidirectional Antenna Type:2.4/5.8G Connector: RP-SMA female V.S.W.R: Less than =1.8 Antenna gain:2dbi Frequencies: 2.4GHz ~ 2.5GHz 4.9GHz ~ 5.8GHz Function:Transmitt....
Check Stock

Parts Express Cable Pants 14mm 2-Conductor, Black (Pack of 10)

  • 【ADVANTAGES】Light weight, good flexibility, high temperature resistance, moisture resistance, corrosion resistance..
  • 【APPLICATION】Antenna systems, communication systems, audio and video transmission systems, security data signal transmission, etc..
  • 【FEATURES】High frequency and low transmission loss, low voltage standing wave ratio, physical foaming flame-retardant, good weather resistance, durable use indoors and outdoors..
  • RG142 coaxial cable is used for interconnection between telecommunication equipment and is widely used in commercial wireless applications. Can be used directly and can maintain good shielding effect when complex underground connections are realized..
Check Stock

EBEETECH 3kinds of USB 3.0 apters kit, USB 3.0 Female to Female and Male to Male and Female to Male, high Speed Convert Extension Coupler Connector converte,black

  • SUPER SPEED OF TRANSFER: These adapters make the data communication and file transfer between computer and equipment become much easier..
  • USB 3.0 TYPE-A MALE TO A MALE: This connecter is designed to convert Super Speed USB 3.0 A female cable connector to USB 3.0 A male connector..
  • USB 3.0 A FEMALE TO FEMALE: This coupler will extend the distance of your existing USB 3.0 cable by allowing two cables to be coupled together..
Check Stock

SDTC Tech SMA Male to BNC Male RF Coaxial Cable RG316 Pigtail Jumper Coax Antenna Extender BNC Connector Adapter (20 inch)

  • SMA to BNC RF Coax Cable, Usually used in Antennas, Wireless LAN Devices , Coaxial cable, Wi-Fi Radios External Antenna etc..
  • Type: RF Coaxial Connector Adapter, Patch Cord, Refit Cable, Wire Jumper.
  • Cable: Military quality RG316 cable, approx. 20 inch..
  • Connector Material: Copper conductor, great connectivity, to ensure high quality communication..
  • Package Include: 1x 20 inch SMA male to BNC male cable..
Check Stock

Autel MaxiSYS VCI100 Compact Bluetooth Vehicle Communication Interface Wireless Diagnostic Interface Vehicle Diagnostic Connector Only MS906BT

  • Vehicle Communication--The wireless diagnostic interface MaxiVCI V100 only work for Autel MaxiSys MS906BT. If you have any problem about bluetooth....
  • MaxiSYS VCI100 Bluetooth Interface work for MS906BT, it can communicate with vehicles' electronic control units (ECUs), guaranteeing performance and....
  • Features convenient wireless Bluetooth technology enabling tech to perform diagnostics outside of a vehicle. Ultra-fast OBDII-port communication....
  • Vehicle diagnostic connector supports comprehensive diagnosis and reading of control modules. Wirelessly connects vehicle ECU to MaxiSYS tablets....
  • Please Note: The new, ultra-compact MaxiSYS-VCI100 features the latest advances in wireless Bluetooth connectivity. It has been carefully designed and....
Check Stock

2.4G 5.8G 5GHz Small Mini WiFi Bluetooth RP-SMA Antenna for Router PC Asus ASRock Mini-itx Motherboard TuffTalk WiFi 6 Card FPV TX Transmitter Thinkcentre Security IP Camera Video Surveillance Monitor

  • ...idth). As client antenna: Connect to an access point in any direction. Designed for wireless 802.11ac and other Dual Band 2.4GHz / 5.8 GHz applications. Omni-directional direct connect antennas tuned to perform on 2.4 & 5.8 GHz networks..
  • Vertically polarized and suitable for many of today’s machine to machine and communication applications such as telemetry, remote monitoring and mesh networking applications..
  • Sends WiFi / wireless signal high and low enough to reach 2 levels of a building. Omni dipole antenna: Radiates signal with a beam of 360 degrees.
  • also receives signal from 360 degrees around it Mounts directly onto RP-SMA-female or SMA-female connector of radio or client device Bottom section of "right angle" version has articulating angle that can be adjusted to 90-degrees or other angle. The versions with an all-brass base (connector section) are waterproof / weatherproof rated IP65..
  • Product name:5.8G Omnidirectional Antenna Type:2.4/5.8G Connector: RP-SMA female V.S.W.R: Less than =1.8 Antenna gain:2dbi Frequencies: 2.4GHz ~ 2.5GHz 4.9GHz ~ 5.8GHz Function:Transmitt....
Check Stock

5 Pcs Fiber Optic attenuator, Fiber Signal Attenuation Converter Inserts Connector (FC-APC, 20dB)

  • 【Connector Type】 20dB attenuation amount, FC-APC Female to FC-APC male attenuator, adopting high performance attenuated fiber.
  • 【Operation Wavelength】This attenuator is suitable for both 1310nm and 1550 nm single mode fiber connection.
  • 【High Attenuation Precision】 Attenuation precision: ±10%, when connector attenuation amount003e5dB.
  • 【Transmission Stability】 Reflectance: dB≥50, which ensures the optical power stay in a stable level on its original transmission wave..
  • 【Easy Installation】 The simple and compact structure make it very user friendly, just need plug and play for installation.
  • 【Product Application】 Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation etc..
Check Stock