Categories

Best Composite Decking Screws

Deck Clips Pack of 36 | Grooved Decking Clips and Deck Screws | Deck Starter Clips for Composite Deck Boards | Universal Starter Deck Clips with Decking Screws

  • EASILY INSTALLS- These starter clips are used for the perimeter deck boards and easily install in grooved composite decking boards. Place one at the center edge of every joist 12"-16" apart..
  • THE PERFECT WAY TO DECKING- These hidden deck clips install below deck and help decking stay in place, without all the drill marks in your boards!.
  • WHAT’S INCLUDED- Purchase includes 36 deck screws, drive bit, and 36 deck clips..
  • CONTRACTORS- We always offer discounts when purchasing 5 or more of any of our products..
Check Stock

CAMO Drive Collated Edge Deck Screws 2-3/8 ProTech 1000 ct

  • For use in 1" and 2x (1-1/2") thick treated lumber, composite, capped composite, or PVC decking.
  • Edge Deck Screws install through the edge of the deck board, leaving a fastener-free surface.
  • Rake tip augers material out, Trimhead reduces visibility on edge, ProTech coating is ACQ Compatible.
  • 1000 ct package covers approximately 285 sq ft (joist spacing of 16 inches). Two(2) driver bits included.
  • Use exclusively with CAMO DRIVE: the stand-up deck fastening tool that makes installation 5X faster.
Check Stock

CAMO Drive Collated Edge Deck Screws 2-3/8 Stainless Steel 1000 ct

  • Use in 1" and 2x (1-1/2") thick wood, composite, capped composite, or PVC decking in areas near open water.
  • Edge Deck Screws install through the edge of the deck board, leaving a fastener-free surface.
  • Rake tip augers material, Trimhead reduces visibility on edge, 316 Stainless Steel resists corrosion.
  • 1000 ct pkg covers approximately 285 sq ft (joist spacing of 16 inches). Two(2) driver bits included.
  • Use exclusively with CAMO DRIVE: the stand-up deck fastening tool that makes installation 5X faster.
Check Stock

Wash Safe Industries WS-SC-1G Clear Spray and Clean Composite Deck Cleaner 1 gal Bottle

  • Use to clean stains caused by moss or algae, or other organic debris from your composite decking.
  • As you spray the Spray n Clean on your deck you will see instantly that the stains are disappearing.
  • Spray and Clean Composite Deck Cleaner is safe, effective and couldn't be easier to use.
  • Works on Tre, Timber tech and all major brands of composite decking.
  • No scrubbing, just apply and saturate the decking, the chemicals do all the work.
Check Stock

Wash Safe Industries WS-SC-HE Spray and Clean Composite Deck Cleaner Hose End Bottle 32 oz Spray Jug Clear

  • Use to clean stains caused by Moss or algae, or other organic debris from your composite decking.
  • As you spray the spray N clean on your deck you will see instantly that the stains are disappearing.
  • Spray and clean composite deck cleaner is safe, effective and couldn't be easier to use.
  • Works on treks, timber Tech and all major brands of composite decking.
  • No scrubbing, just apply and saturate the decking, the chemicals do all the work.
Check Stock

Evo Dyne Deck Cleaner (1-Gallon) | Composite Deck Cleaner for Fiberglass, Painted Surfaces, Vinyl, & More, Made in USA -Wash Grime out of Non-Slip Surfaces & Protect from Future Stains

  • PREMIUM CONCENTRATED FORMULA - Cleans an impressive 1500 Sq.Ft. Developed for professionals now available to everyone..
  • BRUSH INCLUDED! - We included a high quality, natural bristle brush to make this the perfect kit for your wood or composite deck!.
  • DESIGNED FOR USE ON - Timbertech, Trex, Fiberon and all composite and wood decking..
  • ZERO VOC's - Free of volatile organic compounds! NO SOLVENTS - Free of any harmful solvents!.
  • ELIMINATES STAINS - This powerful, concentrated composite and wood cleaner is specifically formulated to remove environmental black and green staining on composite and wood decking. In addition it releases ground in dirt and grease from your composite or wood decking, making it look squeaky clean!.
Check Stock

DeckWise (Black) Ipe Clip Extreme S Hidden Deck Fasteners, 5/32' Gap, Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq.Ft. of AD and KD Hardwood, Thermal or Composite Decks (1050 Bucket)

  • (1140) #8×2″ T15 Stainless Steel Screws.
  • For use with air-dried and kiln-dried lumber along with composite or PVC decking.
  • Allows for expansion and contraction of all compatible wood and decking types.
  • Made from polyethylene with stainless steel black oxide insert.
Check Stock

Cuisinart CGMT-300, 65” x 36, 65\ x 36\

  • DURABLE: The 65" x 35" mat is weather resistant and made from 100% durable PVC material..
  • PROTECTION: Protect your deck and patio from grease, spills and stains..
  • EASY CLEAN: To clean the mat, simply spray it down with a garden hose and it is ready for its next use..
  • PERFECT FOR YOUR GRILL: Works with smokers, gas grills, and griddles.
  • Note: Not recommended for use with composite decking. Discoloration to composite decking may occur if water pools beneath the mat..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

  • ...onsistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ...onsistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Topdex Hidden Deck Fasteners - Strong Plastic Clips with Stainless Steel Screws Inserts 0.19' Gap Spacing Between Wood Flooring Boards - Outdoor Decking Hardware, (90 Clips - 50 sqft)

  • A Sleek-Looking Deck – Build your decking like a pro with the help of these plastic fasteners. These flooring spacers let you mount your boards to the joists while keeping the screws hidden from sight..
  • Consistent Gap Spacing – Maintain the streamlined look of your decking and balcony flooring with these clips. Each plastic clip is designed to create a 0.19″ gap in between your terrace boards..
  • Easy Installation – Save time, effort, and energy in building your deck. To mount, just insert the clip into the side groove of your decking board, drive the screw with your drill, and you’re all set..
  • Crafted To Last – The last thing you need are decking clips that easily break. Our clips are made of tough plastic, while the screws are made of stainless steel that withstands rust or corrosion..
  • Decking Tools With Unbeatable Value – Get the most out of your money whenever you purchase our decking fastener clips. Each pack comes with plastic fasteners and stainless steel mounting screws..
Check Stock

DeckWise (Black) Ipe Clip EXTREMEKD Hidden Deck Fasteners, 1/4\ Spacing, Stainless Steel Black #8x2\ Trim-Head Screws for 100 Sq. Ft. of KD Hardwood, Thermal or Composite Decks (175 ct. Kit)

  • Fastest, Easiest way to hide fasteners in composite, capstock or PVC deck boards.
  • Each 100 linear foot box includes 224 screws, 300 plugs and 2 setting tools.
Check Stock

10 x 1-3/4' Cape Cod Gray Composite Decking Screws. Exterior Coated, Pressure Treated and ACQ Lumber Compatible. Use T20 Torx/Star Dive Bit (1 Pound ~132 Screws)

  • 18 Degree Tapered Head and Reversing Thread to Prevent Mushrooming.
  • Dual Threaded (fine/coarse) Assists With Cutting Through Fibrous Decking Material.
  • Type 17 Tip for Fast Starts, Helps Eliminate "Walking" and Easier Installation without Pre-Drilling.
  • Uses Include Cap Stock, PVC and Composite Decking, Composite Fascia and Composite Railing.
Check Stock