Categories

Best Composite Pipes

Swanson Tool TL011 9-Inch Speedlite Torpedo Level Yellow

  • Lightweight, compact design for portability—carry it in your pocket or tool pouch.
  • Perfect for DIY work like leveling pictures.
  • V-grooved along both edges for working with round stock and pipes.
  • Top-read vial for an accurate read from any angle.
Check Stock

PVC Pipe Cutter, One-hand Ratchet Pipe Cutting Tool for PVC/PPR/PEX/Rubber Hose Cut up to 42mm, Plastic Pipe Tubing Cutter with Replacement SK5 Steel Blade, No Burrs

  • 【Robust and Advanced Design】: Durable aluminum construction for heavy duty use. Ergonomic soft handle grip for reducing hand fatigue for long time working. Locking mechanism for safe storage..
  • 【Quick-change blade mechanism】: Plastic pipe cutter comes with a replacement 'V' shaped blade. High Hardness SK5 carbon steel sharp blade reduces tube deformation..
  • 【Ratchet drive Design】: The professional PVC cutter adopts self-locking ratchet design. The ratchet drive greatly enhances the bite force.It can prevent the cutter from springing back, and cutting is sharp, fast, safe. It was designed to make cutting pipes easily..
  • 【High Cutting Capacity】: The Pipe Cutter blade for cutting most plastic (PVC, CPVC, PP, PEX, PE, rubber hose) and multi layer pipes. the cutting capacity up to 1-2/3”(42mm) outside diameter..
  • 【Wide Application】: Suitable for plumber,professional maintenance staff,electrician and car maintenance master as well as daily home,decoration. Pipe shears is an ideal choice for cutting all kinds of plastic pipes and multi-layer composite tubes ..
Check Stock

JIUNENG 3 Inch HSS Circular Saw Blade, 3/8 Inch Hole High Speed Steel Cutting Disc for Cutting Wood Plastic Metal,1Pcs

  • 【Premium Quality】: JIUNENG 3 inch saw blade is made of strong HSS high-speed-steel, durable and firm. Following the unique advanced science cutting principle, so the defects of other blades can be effectively resolved..
  • 【Sharp serrations】:The saw teeth are ground with automatic gear grinding equipment, the angle is uniform, the surface is fine and sharpness..
  • 【Durable】: Fully polishing and new composite anti-wear coating technology, the surface hardness and service life of the 3 inch saw blade is improved..
  • 【Widely Used】: The saw blade can quickly cut woods, seamless steel pipes, iron pipes, aluminum, copper rods and high hardness plastic materials..
  • 【Compatable】: Used on 3 Inch angle grinder or rotary tools,electric power tools etc..
  • 【Size】: 3x0.039x3/8 inch(75x1.0x10mm) ,72 teeth. Maximum speed: 20500rpm.
Check Stock

Swanson Tool Co PL001M Magnetic Post Level, Yellow, Includes Elastic Loop for Hands-Free Work

  • Strip magnets for leveling metal objects.
  • Hands-free plumb and level of posts, flag poles, water pipes, railings, and more.
  • Elastic attaches level to posts and poles for hands-free work.
Check Stock

KOLERFLO 115V Water Recirculating Pump 3/4 Inch Circulating Water Pump for Water Heater System(RS15-6 Blue)

  • Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft).
  • Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia..
  • Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers.
  • Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water..
  • Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm..
  • The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas..
  • KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circ....
Check Stock

KOLERFLO 3/4 Inch Hot Water Circulating Pump 3-Speed Circulation Water Pump for Solar Heater System(RS15-6 Red)

  • Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft).
  • Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia..
  • Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers.
  • Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water..
  • Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm..
  • The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas..
  • KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulat....
Check Stock

KOLERFLO 3/4 Inch 110V Circulating Water Pump Hot Water Circulation Pump/Circulator Pump for Hot Water System(RS15-6 Green)

  • Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft).
  • Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia..
  • Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers.
  • Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water..
  • Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm..
  • The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas..
  • KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circ....
Check Stock

POWERENG 115V Hot Water Circulating Pump 3/4" NPT 3-Speed Hot Water Recirculating Pump for Solar Heater/Faucet (Blue)

  • 1.Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft).
  • Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia..
  • 2.Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers.
  • Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water..
  • 3.Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm..
  • 4.The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas..
  • 5.POWERENG circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot wate....
Check Stock

Loctite 1999131 All Purpose Repair Putty, 2 Ounces

  • The product is manufactured in united states.
  • Bonds metal, masonry, brick, wood, glass, ceramic, rubber, fiberglass composite, china, stone, marble and many rigid plastics.
  • Use to seal pipes, fix leaks in tanks and drains, repair appliances, tools, furniture, toys, automotive parts, pools and cracks in concrete.
  • When mixed, the combined putties react to produce a hard, tough, permanent and waterproof bond on a wide range of materials..
  • Loctite Repair Putty Multi-Purpose does not shrink and is resistant to most common solvents..
  • It can bond to damp surfaces and cure under water. It can also be sanded, drilled and painted..
  • It can be molded into different shapes so it will fit into any shape of crack..
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
Check Stock

ALDIOUS Electronic Water Descaler System for Whole House, Water Softener Scale Remover, Salt-Free Hard Water Conditioner, Limescale and Rust Removal, 3 Installation Methods, Works with All Pipes

  • ...: salt free water softener needs to be installed on the water inlet pipe for maximum effect..
  • 【APPLICABLE TO ALL PIPES】The size of 2 copper coils is 39.4''×0.4‘’. The whole house descaler works all pipes, including iron, copper, plastic, stainless steel, even PVC, composite pipe, PE-X, etc. and suitable for pipes of 0.5-2 inches in diameter. Operating voltage is 110-120V..
  • 【ADVANTAGES】Pulse bands works great in this new technology since it has a larger working area for all kinds of piping works. Keep the minerals which are great for our body. No salt, No chemical involves into your water, No PH changes too compare to the Water Softener. Super cheap and maintenance free..
Check Stock

ZHEDYI Three-Layer Composite Structure Garden Hose, 10m / 20m / 30m / 40m Household Hose, PVC Environmental Protection Frost and Weatherproof Water Hose, for Garden Watering, Lawn or Yard Maintenance

  • ☀ DURABLE AND LIGHTWEIGHT:Lightweight materials make it easy to handle and store. It is a good helper for lawn irrigation, garden watering, and roof cooling! Its features meet all your needs..
  • ☀ COLD AND FROST RESISTAN: It is not hard in winter. The cold and frost resistance is made of improved PVC material, which improves the anti-aging and anti-freezing performance of water pipes, and it is very soft in winter..
  • ☀ NOT EASY TO DISCOUNT: The thick wall thickness and good flexibility can keep the pipes from being discounted even if they are rolled together..
  • ☀ COMPOSITE STRUCTURE: PVC inner layer, environmentally friendly latex material, high temperature resistance. Fiber netting compressive layer. 500D fiber mesh design, fastened water pipe, high pressure anti-pull. PVC outer layer, cold-resistant, high-temperature resistant, anti-freezing and weathering..
  • ☀ SATISFACTORY SERVICE: We want to meet all your water needs! If you have any questions about the product, please feel free to contact us and we will replace the new hose for free or refund you to ensure this becomes your favorite risk-free purchase method.".
Check Stock

5 Piece NPT Thread Forming Taps Pipe Taps Set High-speed Steel Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads Size 1/8 1/4 3/8 1/2 3/4 in Storage Box

  • Durable materials: Upgrade Your Pipe Threading game with Our Composite Steel Pipe Taps Set. Ditch your old, carbon steel pipe taps and upgrade to our composite steel (GCR15) pipe taps set. With a higher hardness level than traditional carbon steel, our pipe taps are more durable and long-lasting..
  • Tool Storage Box: The 5-piece set includes all the sizes you need for clean and re-threading damaged or jam pipe threads, and the Storage Box makes for easy organization and transport. Includes size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt.
  • Versatile set suitable for both personal and professional use. Clean and Re-Thread Damaged or Jam Pipe Threads with Ease - Ideal for Pipe Fittings, DIYers, handymen, and professionals who need to repair damaged pipe threads. Revive Damaged Pipe Threads with Precision Using Our 5-Piece High-Speed Steel NPT Pipe Taps Set..
  • NPT and BSP Available - Perfect for Cuts Internal Threads in Pipes. Durable and Harder Than Carbon Steel - Our GCR15 Material Makes All the Difference. With a round shank and square end, our pipe taps are well-suited for most applications in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set..
  • Uncoated Tools for Versatile Use: Unco....
Check Stock