YUHX Lead Free Brass Angle Stop Add-A-Tee Valve, Bidet 3/8 x 3/8 x 3/8 Inch Compression or 1/2 T Adapter for One-Piece Skirted Toilet , 3/8' Compression Outlet Easy Connect 3 Way Diverter

  • 1 ★【 Connect Multiple Items 】 Used for adding an outlet on existing 3/8 compression angle stop valve to supply water for faucet , dishwasher , glass rinser , bidets et.
  • Suitable for both cold and hot water systems.
  • 2 ★【 Heath and environment friendly material 】Lead free brass , chrome-plated tee valve for both potable and non-potable water . For adding an outlet on a angle stop valve for a bidet , water filtration system, dishwasher, second faucet, etc.Used for adding an outlet , Install on angle stop valve.
  • 3 ★【 Ideal 3/8 water line splitter 】1/4 turn tee stop valve,so you can freely control on-off of the branch waterway and adjust water flow size to suit your needs.
  • 4 ★【Outstanding performance】Built-in rubber ring for better sealing . It's the perfect alternative for people who have a one piece toilet where access to the 7/8 water tank valve is not possible or too cramped to reach.
  • This T-Adapter can be installed on a 3/8" OD compression threaded water supply to divert to your bidet and toilet fill valve.
  • 5 ★【 T-valve size 】3/8" OD female compression x 3/8" OD compression x 3/8" OD compression or 1/2 thread ,the 3/8 t adapter has 3 outlets , which can be used as one water inlet , two water outlets.
Check Stock

Yeleah Feed Water Adapter Angle Stop Adapter Valve Cold Water Supply Valve Compression 1/4 X3/8 X3/8 for Reverse Osmosis Refrigerator Ice Maker Coffee Brewers

  • 1/4"X3/8"X 3/8" Angle Stop Water Valve Adapter ,Brass Feed Water Adapter Compression Valve,Made Of One Piece Design Lead Free Brass And A....
  • 1/4"X3/8"X 3/8" Compression Valve Female Male t Valve Tee Valve Mixing Valve Adapter With Seals,Sink RO Water Line Splitter,Frigerator Ice Maker....
  • Water valve tap ,Reverse Osmosis Water Faucet Adapter Splitter,Water Line Adapter Splitter Valve 1/4" Compression Fittings Can Be Connected 1/4" Pex....
  • 1/4 Fridge Ice Maker Water Line Splitter ,Under Sink Water Valve Adapter Can onto the normal 3/8 Compression Fitting that most everyone has at the end....
  • 1/4 Angle Stop Valve Adapter Fits Most American Home Kitchen Sink 3/8"Angle Stop Valve ,Water Diverter Valve Stop Valve, Copper Line Refrigerator Ice....
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the ....
Check Stock

Brass Pipe Fittings, Water Hose Adapter, G 1/2 Female to G 3/8 Male Reducer Adapter, Compression Fitting for Kitchen Bathroom Faucet, Pipe Connector with Rubber Washer,(2 Pack)

  • ...NDARD SIZE】G 1/2 female x G 3/8 male adapter is regular US size, suitable for most pipe size with 3/8" converting to 1/2" angle stop. Solve the connection problem between the old shutoff valves and the modern faucet supply line. G 3/8 Male OD: 0.54 inch(13.8mm).
  • 【NO LEAKAGE】Compression adapter comes with rubber seal gasket, just tighten with the gasket provided and no leaks. No Teflon tape needed. As a converter, be threaded easily onto angle stops, connect your flexible water lines..
  • 【WIDELY APPLICATION】Our faucet supply line adapter can be used in the kitchen, bathroom sink, dishwasher, hot water heater, etc. It is a perfect adaptor for 1/2 to 3/8 faucet hose, which will save you the hassle of replacing the valve..
  • 【STURDY AND DURABLE】Water hose adapter is made of high-quality brass material and was treated with premium nickel coating. Solid, anti-corrosion, rust-proof, and high-temperature resistance(withstand up to 100°C / 212°F) features fit faucet hot and cold supply lines..
  • 【SAFETY】The material of pipe compression fitting adapters are harmless, complied with safety regulations, so they can be used for drinkable water pipes. Enable you to quickly connect a kitchen faucet without having t....
Check Stock

SUNGATOR Angle Stop Add-A-Tee Valve, 3/8

  • Lead Free Brass: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet..
  • Wildely Used: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc..
  • Durable: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products..
  • Better Sealing: Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end..
  • Package Includes: 3/8 Inch Lead Free Add-A-Tee Valve (2 pcs).
Check Stock

EZ-Fluid 1/2\ Nominal Comp (5/8\OD Comp) x 3/8\ OD Comp 1/4Quarter Turn Handle Chrome Brass Angle Stop Valve Water Shut Off Ball Valve For Water Pipes Lead-Free, For Faucet,Toilet, Sink Valve (10Pcs)

  • Chrome Brass Water Shut Off Valve ,Angle Stop Valve Use for Faucet Water Valve and Toilet Water Valve.
  • Pack of 10 Pcs Angle Stops Contractor Pack.
  • EZ-Fluid Quarter 1/4-turn Handle Angel stop valves Compatible with copper or Pex Water Pipes (PEX installations require Plumbing Pex tube insert Pex fittings) ,also Available in Pex Valve.
  • 5/8" OD Comp x 3/8" OD Comp angle stop ball valve Fits 1/2" Copper Pipe, it supplies Hot Cold Water For Faucet,Toilet water supply line and faucet supply line Great choice use as Toilet Valve,Faucet Valve.
  • EZ-Fluid Angle Stop Valve 1/2 Nom. (5/8" OD Comp)x 3/8" OD Comp Lead Free Compliant with Low-Lead Legislation Act S3874 & AB1953.
Check Stock

Compatible with Compression Sleeve Puller(03943)-- Sleeve Remover for 1/2-Inch Compression Fittings Only -- Corroded & Frozen Supply Stops --Plumbing Tools Compression Ring Removal Tool

  • Make Your Life Easy--This sleeve remover removes 1/2-inch copper water compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe..
  • Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes..
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant..
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.T....
Check Stock

1/2\FIP Iron Pipe x 3/8\ OD Comp x 3/8\ OD Comp Dual Handle 3 Way Angle Stop Water Shutoff Ball Valve, Lead-Free

  • 1/2" FIP by 3/8" OD by 3/8" OD Dual Handle 3 Way Angle Stop Valve , Lead-Free.
  • Still allowing water to be supplied to another source.
  • Allows you to turn off water to one source.
  • Ideal for kitchen with more than one appliance requiring water.
Check Stock

Refrigerator Icemaker Water Solenoid Valve for Whirlpool Kenmore

  • Replacement for numbers AP3103467, PS358631, 2315576, 2315508, 2210436 and 2181702.
  • This Ice Maker Valve fits specific Whirlpool manufactured Side by Side Refrigerator models including Kitchenaid, Roper, Estate, Kirkland & Kennmore.
  • This valve is designed to replace a wide variety of single coil valves.
  • The valve has: 1/4″ male compression inlet. (Can be retro fitting from original garden hose type connection if present with fittings provided) 1/4″ male compression outlet is printed on the sticker of the valve & this is a replacement for and valves.
  • Included is Compression Union, Nut, Sleeve, Mounting Bracket, Screws and Tubing Inserts.
Check Stock

Fluidmaster 218 Toilet Refill Tube and Clip Replacement, For 100,200,200A, 400A and Most Other Valves , Black

  • Replacement refill tube and angle adapter for Fluidmaster 100,200,200A,and 400-Amp fill valves.
Check Stock

Eastman 1/2 Inch FIP x 3/8 Inch OD Compression Multi-Turn Angle Stop Valve with Brass Stem, Brass Plumbing Fittings, Chrome, 10809LF

  • ANGLE SHUTOFF VALVE: The Eastman multi-turn angled stop valve is designed to control the flow of water in household fixtures such as ice makers, faucets, dishwashers, and toilets, eliminating the need to turn off the water supply to the entire home when maintenance is required.
  • COMPATIBILITY: Quarter turn angle valves are ideal for use with with faucets, toilets, dishwashers, and ice makers.
  • LEAK PROOF: Diverter shut off valve features a leak-proof performance with Teflon seats, and a removable sure-grip metal handle features an oval design for an easy grip.
  • LEAD FREE: Angle stops are composed of durable lead free DZR brass with a sleek chrome finish, and are compliant for potable water drinking applications.
  • SPECS: PEX water shut off valve features a working pressure of 125 PSI, and a working temperature of 40 degrees F to 140 degrees F.
Check Stock

bropite Open Toe Compression Socks for Men & Women - 2 Pairs of 15-20 mmhg toeless Circulation Medical Compression Socks, Best for Outdoor Sports, Varicose Vein

  • Best Gifts Idea For Your Friends And Family! ---Please Check Size Chart!.
  • PROVIDE GOOD HEALTH FOR THE LEGS - 15-20mmHg Toeless Compression Socks Gradually Reduce Pressure From The Ankle Upward, Promote Venous Return Of The Lower Extremities, Relieve The Pressure On Venous Valves, And Improve Varicose Veins. This open toe Medical Compression Socks For Men And Women Can Circulate 360° Softly Press, Improve Leg Edema, Promote The Closure Of Venous Valves, And Achieve The Effect Of Auxiliary Prevention And Auxiliary Treatment, Amazon's Best Choice !.
  • FASHION COMPRESSION TO PROTECT YOUR LEGS - Open Toe Calf Compression Socks are Knee High, Easy To Put On And Take Off, Effectively Dissipate Heat While Wearing, Keep Your Legs Comfortable, Prevent Muscle Strain, Fit The Curve Of Your Legs, Dimensional Wrapping, Even Compression, The 15-20mmhg Toeless Compression Stockings Can Accelerate Blood Circulation And Oxygen Flow, Reduce Soreness In Feet After Exercise, Keep Joints And Muscles In A Stable State, And Prevent Varicose Veins..
  • BREATHABLE COMPRESSION FABRIC - Women's Knee High circulation Compression Socks Are Made Of Soft Fabric, The Calf Goes From Op To Bottom, The Steps Create 15-20mmhg Compression, Tightening The Leg Muscles To Prevent Friction And Prot....
Check Stock

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • Important: Be sure to check the sizes and buy the right valve. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve..
  • Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow..
  • Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
  • Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to pro....
Check Stock