Categories

Best Compression Nut

Compatible with Compression Sleeve Puller（03943）-- Sleeve Remover for 1/2-Inch Compression Fittings Only -- Corroded & Frozen Supply Stops --Plumbing Tools Compression Ring Removal Tool

  • Make Your Life Easy--This sleeve remover removes 1/2-inch copper water compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe..
  • Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes..
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant..
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.T....
Check Stock

Compression Sleeve Puller (4661) - Remove Nut & Ferrule Of Pipe - Ferrule Puller For 1/2” Copper Water Compression Sleeve - 1/2-Inch Copper Tubing - Plumbing Tools Compression Ring Removal Tool

  • Saves A Lot Of Time--This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. Saves a lot of time around cutting old pipes..
  • Make Your Life Easy--This compression sleeve puller removes 1/2-inch copper water compression sleeve. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • Operating Steps--Method 1: Only remove the ferrule---Let the ferrule in between the red notched end of the tool (notched clamping ferrule). Method 2: Both remove the compression nut and ferrule---Place red notched end of tool behind compression nut. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle..
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Easy and fast solve the problem of compression valves failing with small leaks.Ideal for working on frozen or corroded supply stops,corrosion resistant &....
Check Stock

LTWFITTING 5/16-Inch Brass Compression Sleeves Ferrule with 5/16-Inch Compression Nut Brass Compression Fitting Pack of 75

  • Package Include: 50pcs sleeves ferrule, 25pcs compression nut..
  • Net Weight: 1g/PC(sleeves ferrule), 7g/PC(nut)..
  • Type: Compression sleeves ferrule and nut..
Check Stock

LTWFITTING Value Pack 3/8-Inch OD Brass Compression Insert,Sleeve Ferrule,Nut Pack of 125

  • Package Include: 50pcs sleeve ferrules, 25pcs nuts, 50pcs compression inserts..
  • Net Weight: 7.8g/PC(nut), 1.2g/PC(sleeve ferrule), 1.5g/PC(insert)..
  • Type: Compression insert, sleeve ferrule and nut..
Check Stock

MILMUMU Compatible with Compression Sleeve Puller（03943） and Sleeve Remover for 1/2-Inch Compression Fittings Only

  • Compression Sleeve Puller and Sleeve Remover for 1/2-Inch Compression Fittings Only.
  • Ideal for working on frozen or corroded supply stops.
  • Easily removes compression sleeves Won’t damage walls.
  • Wt: 11 ounces Dimensions: 6.8 x 4 x 0.8 inches.
  • Function: Removes Compression Sleeves without Damaging Pipe. Screws Directly into Compression Nut for Removal.
Check Stock

W10238100 WPW10238100 W10342318 AP6017532 PS11750831 Refrigerator Water Inlet Valve Replacement for Whirlpool

  • This part replaces #10238100, WPW10238100, AP4537880, 1872938, AH2579779, EA2579779, PS2579779, W10498992.
  • WPW10238100 supplies water to the refrigerator ice maker.
  • Authorized Factory OEM parts for Whirlpool.
  • 5/16 inch compression Inlet . 1/4inch Compression Outlet with Plastic Compression Nut. Coil is rated 20 Watts 120 Volts and has 1/4inch Terminals..
Check Stock

(4-Pack) BrassCraft G2CR19L1X 1/2-in Nominal Comp x 3/8-in OD Outlet Chrome Plated Brass 1/4-Turn Angle Stop Valve Less Outlet Sleeve/Nut (4-Pack)

  • Inlet: 1/2" Copper Pipe (1/2" Nominal Compression).
  • Outlet: 3/8" OD Compression (NO Nut/Sleeve).
  • Lead Free: Compliant with Low-Lead Legislation Act S3874 & AB1953.
  • Exactly Same As G2CR19XC1 Less Nut/Sleeve on Outlet.
Check Stock

Liberty Mach 3 Threadless Aluminum Scooter IHC Fork (Black)

  • Mach 3 is a Standard size fork for use on Standard or Aluminum Bars.
  • Build in Star Nut for Headset Compression.
Check Stock

Refrigerator Icemaker Water Solenoid Valve for Whirlpool Kenmore

  • Replacement for numbers AP3103467, PS358631, 2315576, 2315508, 2210436 and 2181702.
  • This Ice Maker Valve fits specific Whirlpool manufactured Side by Side Refrigerator models including Kitchenaid, Roper, Estate, Kirkland & Kennmore.
  • This valve is designed to replace a wide variety of single coil valves.
  • The valve has: 1/4″ male compression inlet. (Can be retro fitting from original garden hose type connection if present with fittings provided) 1/4″ male compression outlet is printed on the sticker of the valve & this is a replacement for and valves.
  • Included is Compression Union, Nut, Sleeve, Mounting Bracket, Screws and Tubing Inserts.
Check Stock

Vis Brass Compression Tube Fitting, Sleeve, Ferrules, 3/4\ Tube OD (Pack of 10)

  • Package Include: 50pcs sleeve ferrules, 25pcs nuts, 50pcs inserts..
  • Net Weight: 5.8g/PC(nut), 0.8g/PC(sleeve ferrule), 0.8g/PC(insert)..
  • Type: Compression insert, sleeve ferrule and nut..
Check Stock

LASCO 19-5217 Compression Fitting with Stainless Steel Gripper Sleeve Nut and 3/8-Inch, Nylon

  • Nylon compression fitting with integral sleeve nut.
  • Use on copper, PEX, poly and aluminum tubing.
Check Stock

LASCO 13-2706 Compression Sleeve Puller Tool 4661, 1, SS

  • The Compression Sleeve Puller Effortlessly Pulls The Nut And Ferral Off Of The Pipe.
  • Removes 1/2-Inch Copper Water Compression Sleeve.
Check Stock

Enterpark W10238100 W10498990 Water Inlet Valve for Whirlpool Replace WPW10238100 W10498990 AP6017532 PS11750831 by Robertshaw

  • ✅ Authorized Factory After Service Replacement Part for W10238100.
  • ✅ replaces #10238100, WPW10238100, AP4537880, 1872938, AH2579779, EA2579779, PS2579779, W10498992.
  • ✅ WPW10238100 supplies water to the refrigerator ice maker.
  • ✅ Authorized Factory OEM parts for Whirlpool.
  • ✅ 5/16 inch compression Inlet . 1/4inch Compression Outlet with Plastic Compression Nut. Coil is rated 20 Watts 120 Volts and has 1/4inch Terminals..
Check Stock