Best Compression Stop Valve
Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool
- 【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
- 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
- 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut....
Check StockRefrigerator Water Line Kit - 25FT Ice Maker Tubing with Tee Stop Valve,Flexible Hose with 1/4 Compression Fittings for Potable Drinking Water
- 【Potable Drinking Water Use】:Our refrigerator water line is BPA free,made by food grade materials, non-toxic ingredients,odorless and....
- 【Multiple Applications】:The hose is perfect for linking existing 1/4" outlet angle stop valve or other water supply to Ice....
- 【Moderate Hardness and Durable】:Our 1/4" OD(Outside Diameter)ice maker tubing is flexible but not soft, running through limited spaces....
- 【Easy Installation】:The water line had the preformed ends and each end with brass 1/4" compression fittings,even DIY,your first installation or....
- 【Includes tee stop valve and instructions】:Our ice maker installation kit includes a 3/8"- 1/4"- 3/8" tee stop valve, you can add a branch....
Check StockEZ-Fluid Plumbing 3/8-Inch O.D Female Compression x 3/8-Inch O.D Male Comp A Lead-Free Brass Quarter Turn Water Shut Off Straight Repair Add On Stop Ball Valve,Chrome For Kitchen,Bathroom Faucet 1Pc
- EZ-FLUID Plumbing Chrome Brass Water Shut Off Valve, Straight Angle Stop Valve Use for Kitchen, Bathroom Faucet Water Valves and Toilet Water Valve.
- Lead-Free Quarter Turn Ball Valve Straight Angle Stops 3/8-Inch Female O.D. Compression Captured Nut x Outlet: 3/8-Inch O.D. Male Comp w/ Brass nuts....
- Fits on top of faulty valves to provide a shut off quick fix.
- Lead free Chrome Finished brass approved product in all states.
- Pack of 1 pc 1/4 turn straight add on angle stop repair water shutoff ball valve Approved By UPC, NSF.
Check StockCompression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool
- 【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
- 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
- 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
- 【Easy & Fast Remove】1.Remove the ....
Check StockMinimprover 2 Pack Brass 1/2 Inch FIP x 3/8 Inch OD Compression Quarter Turn Straight Water Angle Stop Valve Shut Off
- ★ Material: Brass. Which make it much more healthy for human. Certified to contain less than 0.25% lead..
- ★ Size: 1/2" FIP (1/2"-14 NPT Pipe Female Threaded) x 3/8" inch OD compression fitting..
- ★ FINISH: Chrome-plated finish resists corrosion. Working temperatures of -40 to 250 F..
- ★ Shut-off angle stop valve for faucets and toilets. Brass ball mechanism provides easy for operation..
- ★ Package include: 2 PCS 1/2" FIP x 3/8" inch OD compression Valve. Comes with 1 year warranty..
Check StockYUHX Feed Water Adapter 3/8 x 1/4 or 3/8 Add-A-Tee 1/2 x 1/4 or 3/8 Water Line splitter ,1/4 Push to Connect not Fit Thread or Braided Hose
- ❶★ [ Water Line Adapter Connection ] Fits both 1/2 thread and 3/8" cold water supply valve, fits on sink 1/2 thread or 3/8 compression angle stop....
- ❷★ [ Easy Installation ] Lead-free brass water feed adapter valve durable and easy to install , Push fit quick connect fiiting to 1/4" tubing (....
- ❸ ★ Quick connect does not work with stainless steel or other braided hoses , If you need to connect 1/4 compression stainless steel braided hose....
- ❹ ★ [ No Drilling and No Damage to Water Pipes ] Tap into your existing shut-off valve from under kitchen sink and create an extra inline 1/4 inch....
- ❺★ [ Safety & Healthy ] Feed water t valve made of lead free brass and a chrome-plated finish, durable, careful processing, explosion proof,....
Check Stock(4-Pack) BrassCraft G2CR19L1X 1/2-in Nominal Comp x 3/8-in OD Outlet Chrome Plated Brass 1/4-Turn Angle Stop Valve Less Outlet Sleeve/Nut (4-Pack)
- Inlet: 1/2" Copper Pipe (1/2" Nominal Compression).
- Outlet: 3/8" OD Compression (NO Nut/Sleeve).
- Lead Free: Compliant with Low-Lead Legislation Act S3874 & AB1953.
- Exactly Same As G2CR19XC1 Less Nut/Sleeve on Outlet.
Check StockDishwasher Installation Kit - 10 FT Stainless Steel Braided Dishwasher Hose kit,Food Grade PEX Inner Tube Dishwasher Water Line with 3/8"x3/8"x3/8" Tee Stop Valve,3/8"x3/8"MIP Elbow,3/8"x3/4"FHT Elbow
- ..., Frigidaire, etc..In particular the 3/8" x 3/8 "x 3/8" Comp tee stop valve, convenient for you add a branch waterways on the existing water supply and freely control on and off..
- 【Easy Installation】:The dishwasher water line each end has brass 3/8" compression fittings and built-in high-quality sealing ring,ensure a securely and solid connection.
- The tee stop valve and elbows with standard thread,plumber's sealant tape is also included in the kit.
- even DIY,your first installation or replacement work can be completed in minutes,and no leakage..
- 【Safe material】:Our dishwasher hose inner tube made by food grade PEX materials, non-toxic ingredients,odorless and tasteless, have tested to meet NSF/ANSI standards.
- the brass tee stop valve and elbows are lead free.Ensure you enjoy the convenience and safety that dishwashers bring to you and your family's lives..
- 【Prime quality 】:The water line outer layer is wrapped with superior grade 304 stainless steel braided wire,the brass tee stop valve and elbows are single piece brass construction.
- So all the parts are extremely safe and durable,there....
Check StockEastman Quarter-Turn Brass Angle Stop Valve, 1/2 inch FIP x 3/8 inch OD Comp, Chrome, 10733LF
- ✅DESIGN- Forged brass construction which provides strength and durability eliminating leaks. The chrome-plated finish gives it a modern look..
- ✅QUALITY- The Teflon seats of the valve resist corrosion and provide a watertight seal. Chrome-plated finish resists corrosion..
- ✅EASY TO USE- Brass ball mechanism provides ease of operation. It has a removable oval handle which provides easy grip..
- ✅FUNCTIONALITY-With 1/4 turn, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home..
- ✅MEASUREMENT- Professional Series Quarter-Turn Angle Stop Valve has a 1/2-inch Iron Pipe Inlet (FIP) x 3/8-inch OD Compression Outlet..
Check StockWV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker
- WV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker.
- WV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker Double Coil Icemaker Water Fill Valve for Whirlpool 4318046.This valve comes with all the neccesary hardware to replace your existing valve including a plastic 1/4″ compression union, a 1/4″ plastic compression nut, a 1/4″ brass compression nut, 1/4″ brass compression sleeve, a 1/4″ x 5/16″ plastic compression union, a 5/16″ plastic compression nut, a piece of 5/16″ plastic tubing, a piece of 1/4″ plastic tubing,.
Check StockHapco Products - Lead Substitute - 16 oz. (Case of 12)
- Use to quickly prevent valve recession and wear.
- Provides maximum lubrication to any fuel system.
- One 16 oz. bottle treats up to 25 gallons.
Check StockLUCAS 10020 Fuel Treatment - 5.25 oz. -Pack of 24
- Use to quickly prevent valve recession and wear.
- Provides maximum lubrication to any fuel system.
- One 16 oz. bottle treats up to 25 gallons.
Check StockPEX Ice Maker Installation Kit – 25 Feet of Tubing For Appliance Water Lines With Stop Tee For Quick Installation, 1/4” Compression Fittings, Flexible Hose For Potable Drinking Water
- COMPLETE ICE MAKER WATER LINE KIT: Crosslinked High Density Polyethylene, PEX, hose is extremely durable. It won’t corrode and can’t be damaged from expansion or contraction. Easily withstands temperature and pressure stresses that occur in water systems. Flexible, one piece design includes 1/4” compression fittings at each end. Perfect for refrigerator, freezer, humidifier and water filter connections..
- INSTALLS IN MINUTES AND LEAVES NO ODORS OR BAD TASTE: Complete your maintenance or fix your appliances quickly and easily. This kit is designed to get the job done fast without inconveniencing yourself or other members of your household. The stop tee valve quickly and neatly connects to your current set up to divert the water where you want it to go..
- COPPER STOP TEE allows you to safely use this set up for your ice makers, humidifiers, water filters and other potable drinking water applications. Stop tee measures 1/4″ x 3/8″ x 3/8″ and is ready to connect to existing supply stops..
- HIGH QUALITY AND SAFE PEX AND COPPER. The PEX tubing is extremely reliable and long lasting. It is NSF 14, NSF 61 and ASME A112.18.6 certified. The copper stop tee is sturdy, durable, and long lasting. Great for both contractors and DIYers. In....
Check Stock