Categories

Best Compression Tester For Outboard Motors

9 Pieces Automotive Compression Tester Kit and Spark Plug Tester, Universal Car and Motorcycle Engine Testing Tools for Cylinder Pressure Gauge (Black)

  • 【Complete Kit for Car Testing】: the 9pcs cylinder testing kit comes with 8 x compression tool and 1 x spark plug tester, total package includes 1 x SPARK PLUG TESTER, 1 x 300PSI DUAL UNITS GAUGE, 1 x STRAIGHT RUBBER CONE ADAPTER, 1 x CURVED RUBBER CONE ADAPTER, 4 x BRASS ADAPTERS, and 1 x 14-inch EXTENSION HOSE, complete package allows you to test the car’s condition easily by yourself.
  • 【Extra Value with Spark Plug Tester】: the spark tester is a must have diagnostic tool for engine which has a spark plug, you can diagnose ignition or engine outboard motor issues and a fault in the fuel delivery system quickly and easily.
  • If spark is being sent, the tester will mirror the spark and you can see it light up, therefor you can find dirty spark plugs, defective points, bad cables or connections, etc..
  • 【300psi Dual Units Gauge with 3” Dial】: easy to read this compression gauge which comes with 0 - 300 PSI and 0 - 20 kg/ cm square dual units, the gauge cover is protected by an anti-scratch coating and rubber protection to absorb shocks.
  • Plus, all the items are contained in an ABS case for easy storage, the fittings can accommodate most or all of your needs for most engines, good kit overall for your garage.
  • 【Easy and Safe to Use】: first, rem....
Check Stock

Newport Trolling Motor Transom Motor Mount - Kayaks - Freshwater and Saltwater - 1 Size

  • 3 HORSEPOWER: The Newport Transom Mount is a 3 horsepower maximum rated product that is designed specifically for small outboard motors and transom trolling mounted trolling motors. This product is made from high quality materials and is designed for durability and performance..
  • CORROSION RESISTANT: Saltwater and Freshwater compatible, the Newport Transom Mount is a salt water and freshwater compatible transom mount that is designed for use with electric trolling motors. This transom mount is made of durable Aluminum and features a quick-release 4- bolt mount for easy installation and removal..
  • FITS MOST KAYAKS: Widely used 3.75" x 4.75" bolt pattern This transom mount is widely used for its 3. 75 x 4. 75 bolt pattern. It fits most outboard motors and trolling motors and fits majority of Kayak models. The Newport Transom Mount is made of durable aluminum..
  • REMOVABLE AND REPLACEABLE POLYMER TRANSOM PLATES: The Newport Transom Mount is a removable and replaceable polymer transom plate that can be easily installed on any boat. The plate is designed to provide a strong and durable mounting surface for a variety of out....
Check Stock

AutoWanderer Tool 9Pcs Engine Compression Tester Kit with Spark Plug Tester, Universal Automotive Petrol Gas Cylinder Pressure Gauge Set Engine Testing Tools M10, M12, M14, M18 Fitting

  • ✔【Professional and Long-lasting use】: Petrol engine cylinder compression tester kit is made of durable steel and brass components for all-day performance in the shop or garage. Checking compression of petrol engines quickly and accurately. Diagnose various common engine faults. Perfect christmas gifts for men women.
  • ✔【Pressure Gauge & Various Adapters】: Dual color graduation(0-300 PSI, 0- 21 kg/cm ²) cylinder pressure tester has quick push button release valve. Please press it to release pressure before the test is over. Oxidation and corrosion resistant brass adapters, M10 thread is suitable for motorcycles, M12 / M14 / M18 threads are suitable for car..
  • ✔【Spark Plug Tester】: A must have diagnostic tool for any engine with a spark plug, can quickly and easily diagnose ignition/engine outboard motor issues or a fault in the fuel delivery system..
  • ✔【A complete kit】: Comes with 1 Cylinder Pressure Gauge, 4 adapters of standard and specialty, 2 rubber cone ends, 16.5" flex hose gauge assembly with quick coupler, 1 user manual, all firmly stored in the case. 1 Spark Plug Tester is outside the m....
Check Stock

YaeMarine 2 Stroke Outboard Motor Bracket Kicker for Boat up to 25hp Auxilary Trolling Mount

  • Construction : All stainless stamped construction outboard motor bracket for 2-stroke motors, could bear up to 110 lbs.
  • Specifications : Motor pad - 7.9"(20.1cm) wide, 6.3"(16cm) and 8.15"(20.7cm) two side length, 1.09"(4.3cm) thick, stainless nylock nuts (metric).
  • Applications : Fits most style of 2-stroke outboard motors.
  • Easy to install : 5 vertical running position lock bars.
  • locking the safety knobs to keep the bracket in place.
  • holds the outboard motor up or lowers....
  • Note : please be careful of the sharp edge when you install.
  • Please feel free to contact us if you have any question about the product. We would try....
Check Stock

Ironwood Pacific HelmsMate Tiller Extension Handle U | Universal Joint Model | 37\-51\ Extendable

  • Full steering and throttle control while sitting away from your trolling or small outboard motor.
  • Fits gas and electric outboard boat trolling motors 15HP and under.
  • Anodized aluminum, corrosion resistant fittings and unbreakable nylon clamp are designed to last.
  • Designed to fill tiller handles on all electric and gas outboard motors 15 hp or under.
Check Stock

TUFFIOM Outboard Boat Motor Stand, Engine Carrier Cart Dolly for Storage, 315lbs Weight Capacity, w/Wheels (Black)

  • 【High-quality Materials】 The outboard boat motor stand carrier cart dolly is made of sturdy steel tubes and solid wood, which are scratch and wear resistant and not easily deformed. The surface of the steel tube stand is electroplated to prevent rust and corrosion, extending its service life.It is also fixed with high-quality screws to ensure a good and stable structure and a high load capacity..
  • 【High Load-bearing Capacity】 This outboard boat motor stand carrier cart dolly features a thickened pine hanging board with a loading capacity of up to 154.32lbs, which can withstand the weight of most outboard motors..
  • 【Good Stability】 It has a geometric triangular structure and two widened rear wheels, making the trolley more stable and less likely to tip over, so it is easier and safer to use.The simple construction of this trolley makes it very easy to install. It comes with all the necessary accessories in the package for convenient and time-saving installation..
  • 【Space Saving】The two support frames on the sides have been carefully designed with clasps so that you can fold this trolley quickly and without takin....
Check Stock

Barnabas Robotics Servo Motor Tester Kit | 180 Degree 9g Servo Motor + RC Servo Tester Controller + 6V Battery Holder

  • [CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
  • [9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
  • [4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
  • [SERVO TESTER] Includes 3 modes to test servo motors or ESC.
  • [GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.
Check Stock

Sporacingrts Outboard1 1/2' -16 Flywheel Puller Removal Tool 91-849154T1 Compatible with Mercury Mariner Compatible withce Yamaha

  • ★[ Fit For ] -- Fit for Most 45HP+ Mercury, Mariner, Force and Yamaha outboard motors with 1 1/2"-16 TPI threads but doesn't work on Verado.
  • ★[ Easy to Use] -- Made it easier to remove the flywheel without damage and easy to lift the outboard motor.
  • ★[ Precision Size ] -- Size: 1 1/2"-16 TPI Tool Threads & 5/8"-18 TPI Bolt Threads.
  • ★[ Durable Quality ] -- Nice craftsmanship, solid and heavy duty, the flywheel puller with black oxide finish to prevent from corrosion.
  • ★[ Tool Needed ] -- Needs tool when changing Mercury outboard motors on boats and lifting the engine off transom.
Check Stock

YiheoZux YM08 Transom Saver for Boat Outboard Motor Trailering Support with Steering Cylinders Stabilizer Stop Clips

  • Transom Saver Dimension Length 8.65 Inches.
  • 2 Locks Hydraulic Steering Cylinders Stop Dimension Length 4.15 Inches.
  • Material with Highest Marine Grade Rubber and Plastic.
  • Fit Yamaha Suzuki Mercury Honda Evinrude Tohatsu with 3 Rams Trim and Tilt Outboard Motors.
Check Stock

osemar Jack Plate for Outboard Motor Boat 6'' Setback JPL4000 Adjustable

  • Jack plates for outboard motor fits all V-4 and V-6 standard bolt pattern engines..
  • Boat jack plate is designed for smaller motors to improve the performance of your boat..
  • Jack plate for small outboard is made of high strength polished Aircraft Quality Aluminum..
  • Jack plate Weighs 20 lbs.150 Maximum Horsepower, 4 inches of adjustable vertical movement.
  • Package Include:1 x Adjustable Outboard Boat Jack Plate..
Check Stock

Zinger Mercury Mariner Outboard Lift,Flywheel Puller Removal Tool 91-849154T1,Lift Ring 91-90455-1

  • Flywheel puller with crank shaft protector 91-849154T1,Lifting Ring 91-90455-1.
  • A must have tool when changing Mercury outboard motors on boats and lifting the engine off transom.
  • Nice craftsmanship and solid. 5/8"-18 TPI Bolt and Lift Ring Threads.
  • For Most 45HP+ Mercury, Mariner, Force and Yamaha outboard motors with 1 1/2"-16 TPI threads units from the 1960s to present,but pls check thread diameter to verity.
  • Warm tips: please apply some lube oil on the flywheel and puller tool before use it.Thank you !.
Check Stock

BYS VRO Oil Injection Conversion Fuel Pump Kit for Johnson/Evinrude 5007420 5007422

  • ▶ This VRO system conversion non-oiling fuel pump for 90hp-250hp Johnson & Evinrude Outboard motors. Fits V6 Crossflow and Looper engines but DOES NOT fit 60 degrees applications..
  • ▶ Replace Part Number：for Johnson/Evinrude 5007420,5007422.
  • OMC part # 4-7359； EMP part # 1399-07359. Interchange Part Number: for Volvo 5007420.
  • ▶ Compatibility: 5007420 VRO system conversion non-oiling fuel pump for 90hp-250hp Johnson & Evinrude Outboard motors..
  • ▶ 5007420 VRO Oil Injection Conversion Fuel Pump is specially designed to exact OEM standards manufactured and tested,to help deliver optimum performance in Johnson/Evinrude engines,provides a good engine performance,which gives your machine the new power and torque it really deserves..
  • ▶ Package Includes: 1x VRO Oil Injection Conversion Fuel Pump Kit..
Check Stock

ITACO Boat Motor Engine Kill Stop Switch & Safety Lanyard 6E9-82575-09 For Yamaha / Honda / Tohatsu Outboard Motors Engine

  • Fit Yamaha Outboard Part Number: 6E9-82575-09, 6E9-82575-00/01/02, 689-82575-00/01/02/03 (check OEM part number before purchase!!!).
  • This switch assy include the red safety lanyard, it is a kit price..
  • For Yamaha/Honda/Tohatsu Outboard Motors.
Check Stock