Categories

Best Compression Valve

Litorange 2 Pack Lead Free Brass Mini Ball Valve Shut Off Switch 1/4 inch Compression by 1/4 Compression Fitting

  • ★ Size: 1/4 inch compression x 1/4 inch compression valve..
  • ★ 180 degree valve closing range, the handle can close the valve by rotating it to either side of the valve body.
  • ★ Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • ★ Package include: 2 PCS 1/4 inch compression x 1/4 inch compression. Comes with 1 year warranty..
Check Stock

(KAS) Double Coil Icemaker Water Fill Valve for Whirlpool Kenmore Refrigerator Icemaker 4318046 WV8046 2188542

  • WV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker.
  • This valve comes with all the neccesary hardware to replace your existing valve including a plastic 1/4″ compression union, a 1/4″ plastic compression nut, a 1/4″ brass compression nut, 1/4″ brass compression sleeve, a 1/4″ x 5/16″ plastic compression union, a 5/16″ plastic compression nut, a piece of 5/16″ plastic tubing, a piece of 1/4″ plastic tubing, for retro fitting from garden hose connection, a mounting bracket & screws. It has 1/4″ & 5/16″ compression fittings on inlet & 1/4″ on outle.
  • Detailed installation instructions included..
  • Replacement for numbers 2002182, 4210533, 627403, 627431, 627580, 627859, 627890, 627937, 627963, 628164, 628184, 628185, 628238, 628275, 628295, 819493, 850733, 876070, 2188542, AP3103466 and PS358630..
Check Stock

Refrigerator Icemaker Water Solenoid Valve for Whirlpool Kenmore

  • Replacement for numbers AP3103467, PS358631, 2315576, 2315508, 2210436 and 2181702.
  • This Ice Maker Valve fits specific Whirlpool manufactured Side by Side Refrigerator models including Kitchenaid, Roper, Estate, Kirkland & Kennmore.
  • This valve is designed to replace a wide variety of single coil valves.
  • The valve has: 1/4″ male compression inlet. (Can be retro fitting from original garden hose type connection if present with fittings provided) 1/4″ male compression outlet is printed on the sticker of the valve & this is a replacement for and valves.
  • Included is Compression Union, Nut, Sleeve, Mounting Bracket, Screws and Tubing Inserts.
Check Stock

Valve Spring Compressor, Auto Compression Clamp Tool Service Kit for ATV, Car, Motorcycle,Small Engine Vehicle Equipment,Valve Spring Compressor ToolsAutomotive Tool C Clamp Service Set,10 Pcs

  • ...ation.The forged steel construction of this set provides superior strength and hardness. The C-Clamp will not bend or twist under the stress of compressing valve springs. The oxide finish on the set components resists rust and corrosion. The surface finish of each part is smooth and provides for easy use under high compression..
  • Valve Spring Compressor Tools -come packaged in a high-impact case that holds each part securely. The parts will remain organized and safe while stored or in transport, and the case stacks and stores away conveniently.1 x Spring Compressor ""C"" Clamp ,5 x Adaptors ,3 x Extension Screws ,1 x Compression Bar ,1 x Storage Case.
  • Solid Valve Spring Compressor Kit to effortlessly reset your valve springs. The Orion Kit comes fully stocked with 5 collets to fit hundreds of makes and models, such as motorcycles, ATVs, cars, and other small engines..
  • Valve Spring Compressor Set included:(5) Metric collets – 16mm, 19mm, 23mm, 25mm, 30mm, (3) extension screws, (1) spring compressor U-clamp with a maximum jaw opening of 9.5 inches, (1) compression bar, and (1) storage case for your convenience The items are the same as the pictures.We provide carefree return, Our aim at pursuing the maximum satisfaction of our buyers!.
Check Stock

YUHX Brass Bidet T Adapter with Shut-Off Valve,3 Way 7/8 or 15/16 and 1/2 or 3/8,Metal T Valve for Bidet Tee Connector Water Diverter Valve

  • ... and leakage problems , Metal bidet adapter valve can be connected to the toilet filling valve manually without tools , cone washer helps make installation smooth and leak-proof.
  • ❷ ★ [ No-Leak metal t valve for toilet ] It has chrome plated surface , the leak proof design , high quality brass and ceramic valve , compression resistance , explosion proof, ensuring quality and longevity , no need to worry about fracture.
  • ❸ ★ [ Screen Washer Can Extend The Use Time of Bidet ] Includes screen filter washer to bidet line , Bidet shut off valve adapter with 1/2 filter screen sealing washer Can capture sand , dust , rust or other sediment particles entering the bidet , effectively prevents water damage.
  • ❹ ★ [ Brass t-valve bidet connection Size ] 7/8 female thread to the toilet filling valve , 7/8 male thread to the water supply ( 7/8 cock thread compatible 15/16 – 14UNS ) , 1/2 thread or 3/8 Compression thread to the bidet hose.
  • ❺ ★ [ 7/8 bidet adapter t valve ] Used to shut off water flow when not in use and adjust water pressure to suit your needs, there is no need to worry about affecting the water flow of the toilet after installing the bidet adapter valve.
Check Stock

Bidet T Adapter with Shut-Off Valve,3 way T Adapter for Bidet,Brass T Adapter Bidet Tee Connector 7/8”1/2”16/15”,T Adapter Valve for Handheld Toilet Spray

  • ...and leakage problems. Metal bidet adapter valve can be connected to the toilet filling valve manually without tools, cone washer helps make installation smooth and leak-proof.
  • [ High Quality T Valve for Toilet ] Our t adapter bidet has chrome plated surface,the leak proof design,high quality brass and ceramic valve, compression resistance,explosion proof,ensuring quality and longevity,do not worry about fracture..
  • [ T valve bidet connection Size ] This bidet t adapter 7/8 female thread to the toilet filling valve, 7/8 male thread to the water supply(7/8 cock thread compatible 15/16 – 14UNS),1/2 thread or 3/8 Compression thread to the bidet hose.
  • 【After Service】Each brass metal T adapter valve diverter has passed strict quality test, We will provide the t adapter 2 years technical support and 60 days full refund.if you have any problem,please contact with us any time,we will reply for you within 24 hours ..
Check Stock

BETOOLL 8pcs Compression Tester Automotive - Digital Compression Gauge 0-300PSI for Petrol Engine Cylinder Compression Test Tool Kit with Adapters & Hose

  • Smart Digital Gauge: Clear and accurate data showed in backlight display, with 4 different kinds of numerical units in PSI, KPA, Bar, and KG/CM², easy to control with buttons..
  • Scope of Application: Engine cylinder compression test tool kit could be used on cars, trucks, ships, ATVs, UTVs, RVs, motorcycles, snowmobiles, boats, off road vehicles, etc..
  • Quick Release Valve Design: Compression tester with release valve desgin could offer single-handed operation inflation and deflation..
  • Accurate Measurement: Digital compression gauge has 0.5 display resolution instead of normal 5PSI display resolution compression tester..
  • ALL-IN-ONE COMPRESSION TESTER KIT: 1x digital gauge, 1x extension hose, 1x straight push-on connectors, 1 x angled push-on connectors, 4x brass adapters with metric male fittings & O-rings: M10, M12, M14, M18..
Check Stock

SUNGATOR Angle Stop Add-A-Tee Valve, 3/8

  • Lead Free Brass: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet..
  • Wildely Used: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc..
  • Durable: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products..
  • Better Sealing: Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end..
  • Package Includes: 3/8 Inch Lead Free Add-A-Tee Valve (2 pcs).
Check Stock

Eastman 04353LF Multi-Turn Dual-Outlet Compression Inlet 3-Way Stop Valve with Removable Metal Handle, 5/8-Inch OD Compression Inlet (1/2-Inch Nom.) x 3/8-OD Compression Outlet x 3/8-Inch OD Compression Outlet, Chrome Plated

  • ✅QUALITY- Made of a brass body, plastic stem, brass nuts, and a chrome-plated finish. The Eastman Speed-flex 3-way shut-off valve is a multi-turn valve that resists corrosion and provides a water-tight seal. The working temperature is 40° F to 140° F and the working pressure is 125 PSI..
  • ✅EASY TO USE- Removable handle with an oval design for easy grip..
  • ✅FUNCTIONALITY- This multi-turn stop valve controls water flow at the plumbing fixture, eliminating the need to turn off the water supply to the entire home for maintenance..
  • ✅MEASUREMENT- This stop valve has a 5/8-inch outer diameter compression inlet x dual-outlet connection: 3/8-inch outer diameter compression outlet x 3/8 outer diameter compression outlet..
  • ✅SAFETY- UPC and NSF approved, complies with Lead Free law..
Check Stock

Minimprover Lead Free Brass Replacement Control Needle Valve 1/4\ OD Compression X 1/4\ OD Compression

  • ★【Material】Lead Free Brass.Which is corrosion resistance, no leaking, ductility at high Which make it much more healthy for human. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution..
  • ★【Application】Needle Valves are designed to regulate flow to an instrument or other industrial application. They are rugged enough for the oil & gas market, and suitable for most industrial applications.It can be used to open and close the propane. If you need a long time and stable control, it would be better to use with a regulator..
  • ★【Size】1/4" OD Compression x 1/4" OD Compression.This compression needle valve allows very fine control of water flow. It has 2 compression connections..
  • ★【Parameter】Working Pressure: Rated to 600 PSI. Temperatures range from -4 to 450 F..
  • ★【Package include】 1 PCS 1/4" * 1/4" Needle Valve. It comes with 1 year warranty. Any problems just contact us to resolve..
Check Stock

Ice Maker Water Valve 241803701 242252603 240519601 For Frigidaire Refrigerator New

  • Actual #’s on valve: 242252603 RIV-11AE 8F-140319.
  • Angled valve bracket is easily bendable with pliers.
  • Refrigerator Water Inlet Valve,This valve will fit most brands such as Frigidaire, White Westinghouse, Tappan, Gibson, Kelvinator, Sears, & Kenmore.
  • It is a single solenoid valve with a 1/4″ inlet & outlet which is standard. This valve has the new “John Guest” style fitting which allows you to just push the waterline directly into the valve from the ice maker. It’s that easy and no leaks! The other end will have the standard 1/4″ compression fitting that your supply line will hook to. This valve will work with most all refrigerators that have the freezer on top or bottom. It will NOT work with a refrigerator that has a water filter built in.
  • Included: (1) Valve, (1) 1/4″ Waterline, (2) Mounting Screws.
Check Stock

silverfish Replacement Wireless Air Bed Pump (4 Valve) Compatible with Select Comfort or Sleep Number Mattresses

  • 4 Valve, quiet, sleek, compatible with Sleep Number, Select Comfort, zoned air mattress.
  • New and Improved - 4 VALVE sleek designed Wireless replacement air pump designed to work with both single-chamber and dual-chamber air beds. 4 Valve System is made for 2 zone air compression for increased total comfort..
  • Quality Craftmanship & Quiet - having a heavy duty motor it also boasts new technology that reduces noise and is more quiet when compared to other models during compression. This pump is compatible with your Select Comfort or Sleep Number beds..
  • Ergonomic Remotes - TWO wireless remote (controls both Left and Right side of bed), a power source and TWO sets of Quick-lock connectors..
  • compatible with leading brand air mattresses ie. Sleep Number & Select Comfort Mattresses.
Check Stock

Ice Maker Water Valve 241803701 242252603 240519601 for New Frigidaire Refrigerator

  • Actual #’s on valve: 242252603 RIV-11AE 8F-140319 Angled valve bracket is easily bendable with pliers.
  • Refrigerator Water Inlet Valve This valve will fit most brands such as Frigidaire, White Westinghouse, Tappan, Gibson, Kelvinator, Sears, & Kenmore.
  • It is a single solenoid valve with a 1/4″ inlet & outlet which is standard. This valve has the new “John Guest” style fitting which allows you to just push the waterline directly into the valve from the ice maker. It’s that easy and no leaks! The other end will have the standard 1/4″ compression fitting that your supply line will hook to..
  • This valve will work with most all refrigerators that have the freezer on top or bottom. It will NOT work with a refrigerator that has a water filter built into the refrigerator from the factory..
  • What’s Included? (1) Valve, (1) 1/4″ Waterline, (2) Mounting Screws & More!.
Check Stock