Categories

Best Compressor Controller

Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew

  • ...y plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking..
Check Stock

Inkbird Digital Temperature Probe Controller ITC608T Thermostat 120V 15A 1800W Pre Wired AC Dual Stage Outlet 12 Period Timer Stage

  • ...ture and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking..
Check Stock

Inkbird Temperature Controller ITC-608T Pre-Wired AC Dual Stage Outlet Thermostat with 12 Period Time Stage 1800W ETL Listed Homebrew Reptile Breed

  • ...and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • ????????Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • ????????More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • ????????Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking..
Check Stock

Inkbird Combination Temperature and Humidity Controller ITC-608T Digital Pre-wired Outlet Humidistat Thermostat, 120V 15A 1800W, 12 Period Time Dual Stage w/Sensor

  • ...re and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • 3.√Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • 4.√More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • 5.√Multifunction usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking..
Check Stock

Inkbird Temperature ＆ Humidity Controller ITC-608T Pre-wired AC Dual Stage Outlet Thermostat Humidistat with 12 Period Time Stage 120V 15A 1800W Cooling/Heating and Humidifier/Dehumidifier

  • ...ting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • Three in one Multifunction Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and....
Check Stock

AIR LIFT 25804 Air Shock Controller Kit

  • Allows driver control for air shock pressure right from the driver seat.
  • Universal connector for most air shocks including factory installed.
  • Includes dash mount gauge panel and hardware and air line.
  • Easy to installDescriptionAIR LIFT Air Shock Controller Kit is designed to control the air shock pressure. It includes rugged on board air compressor and dash mount gauge panel as well as hardware. This kit facilitates easy and quick installation..
Check Stock

Poafamx Aquarium Chiller 79Gal 1/3 HP Water Chiller for Hydroponics System Home Use Axolotl Fish Coral Shrimp 110V with Pump and Pipe

  • [INSTRUCTIONS AND TEMPERATURE CONTROLLER UPGRADED] We have upgraded the instructions and temperature controller based on previous after-sales....
  • [HIGH-EFFICIENCY ENERGY-SAVING COMPRESSOR TO MAKE FAST AND ACCURATE CYCLE] Built-in high-efficiency energy saving compressor, which can support....
  • [ONE WATER PIPE CUT INTO 2 PIECES] Aquarium water chiller is equipped with a 3m/118 inch long water pipe, and you need to cut it into two pieces while....
  • [FISH TANK AND HYDROPONICS SUITABLE] Widely used in fresh water and saltwater fish tanks or hydroponics systems for homes, hotels, aquariums, fish....
  • [ONE YEAR WARRANTY] Our stores provides one-year warranty for this 79gal water chiller, we will give you a satisfactory solutions if any problems....
Check Stock

Fielect N.O 40℃ 5pcs Normally Open Temperature Switch, KSD-01F Thermal Switch Thermostat Temperature Controller

  • Defrost Two defrost modes are available through the td parameter: td=EL defrost through electrical heater (compressor OFF).
  • td=in hot gas defrost (compressor ON). Other parameters are used to control the interval between defrost cycles (id), its maximum length (Md) and two defrost modes: timed or controlled by the evaporator's probe. At the end of defrost dripping time is started, its length is set in the dt parameter. With dt=0 the dripping time is disabled.
  • SAFETY PRECAUTIONS Check the supply voltage is correct before connecting the instrument. Do not expose to water or moisture: use the controller only within the operating limits avoiding sudden temperature changes with high atmospheric humidity to prevent formation of condensation. ? Warning: disconnect all electrical connections before any kind of maintenance. ? Fit the probe where it is not accessible by the End User. The instrument must not be opened..
  • In case of failure or faulty operation send the instrument back to the distributor or to Dixell S.r.l.(see address) with a detailed description of the fault. Consider the maximum current which can be applied to each relay (see Technical Data). Ensure that the wires for probes, loads and the power supply are separated and far enough from each ....
Check Stock

Dixell XR60CX-5N1C1 Digital Thermostat Controller with Defrost Compressor Control of Evaporator Fans 230V/50-60Hz Programmable-Commercial for Refrigeration

  • The regulation is performed according to the temperature measured by the thermostat probe with a positive differential from the set point: if the temperature increases and reaches set point plus differential the compressor is started and then turned off when the temperature reaches the set point value again.In case of fault in the thermostat probe the start and stop of the compressor are timed through parameters COn and COF..
  • Two defrost modes are available through the tdF parameter:defrost through electrical heater (tdF= EL) and hot gas defrost (tdF = in).Other parameters are used to control the interval between defrost cycles (IdF), its maximum length (MdF) and two defrost modes: timed or controlled by the evaporator?s probe (P2P).At the end of defrost dripping time is started, its length is set in the FSt parameter. With FSt =0 the dripping time is disabled..
  • Forced activation of fans This function managed by the Fct parameter is designed to avoid short cycles of fans, that could happen when the controller is switched on or after a defrost, when the room air warms the evaporator. Functioning: if the difference of temperature between the evaporator and the room probes is more than the value of the Fct parameter, the fans are switched on. With Fct=0 t....
Check Stock

GE WR49X10283 Series INVERTER WITH JUMPERS KIT

  • Refrigerator compressor mounted controller,(PCB) - WR49X10283.
  • REPLACeS OLD PART NUMBERS: WR55X10490 WR55X10685 WR55X10979 2677747 AH10065259 AH6883663 AP5669522 B01MUF71II EA10065259 EA6883663 EAP10065259 EAP6883663 PS10065259 PS6883663 WR49X10283.
  • This part works with the following brands: G.E., GE, General Electric, Westinghouse, Monogram, Café, Moffat, Profile, Sears, McClary, Hotpoint, & Kenmore..
  • Refrigerator Inverter Board. This inverter board is compressor mounted. The invertor control board manages the functions of the refrigerator, such as cooling..
  • PLEASE NOTE: CONNECTORS FROM OLD UNIT REQUIRED!! THIS UNIT COMES WITHOUT CONNECTORS!.
Check Stock

Dixell XR06CX-4N1F1 Adjustable Touch Screen Digital Thermostat Controller Compressor Defrost Fans 110V/50-60Hz for Refrigerating Units

  • XR06CX is for applications on medium or low temperature ventilated refrigerating units.With FC parameter it can be selected the fans functioning FC=cn will switch ON and OFF with the compressor and not run during defrost FC=on fans will run even if the compressor is off, and not run during defrost After defrost, there is a timed fan delay allowing for drip time, set by means of the Fd parameter..
  • FC=cy fans will switch ON and OFF with the compressor and run during defrost FC=oY fans will run continuously also during defrost. An additional parameter FS provides the setting of temperature, detected by the evaporator probe, above which the fans are always OFF. This is used to make sure circulation of air only if his temperature is lower than set in FS..
  • FANS AND DIGITAL INPUT When the digital input is configured as door switch iF=do, fans and compressor status depends on the dC parameter value: dC=no normal regulation.
  • dC=Fc compressor and fans OFF. When rd=y, the regulation restart with door open alarm.
  • SAFETY PRECAUTIONS Check the supply voltage is correct before connecting the instrument. Do not expose to water or moisture: use the controller only within the operating limits avoiding sudden temperature changes with ....
Check Stock

52" Double 2 Door Side By Side Stainless Steel Reach in Commercial Refrigerator, 49 Cubic Feet, for Restaurant

  • Stainless Steel, 2 Door Reach In Refrigerator, 6 Shelves, Lock fitted with door locks, Digital controller, Capacity: 49 Cubic Feet..
  • Adjustable 33-41° F Temperature, Electro-Mechanical Thermostat, Top Mount Compressor for improved efficiencies, Ergonomic design, Recessed door handles..
  • Refrigerant: R134a, Power Requirements: 5.6 Amps @ 110-120v AC (Regular 3 prong outlet), Dimensions: 51.7″ W x 33.2″ D x 83.8″ H.
  • Warranty: 5 YEAR COMPRESSOR WARRANTY INCLUDED. 1 YEAR ALL ADDITIONAL PARTS.
Check Stock

Dixell XR20CX-5N1C1 230V/50-60Hz Digital Thermostat Controller Off Cycle Compressor Defrost Programmable-Commercial for Refrigeration

  • It is a digital thermostat with off cycle defrost designed for refrigeration applications at normal temperature.It provides a relay output to drive the compressor.Suitable for appliances including:for refrigeration applications at normal temperature..
  • COMPRESSOR:The regulation is performed according to the temperature measured by the thermostat probe with a positive differential from the set point: if the temperature increases and reaches set point plus differential the compressor is started and then turned off when the temperature reaches the set point value again. In case of fault in the thermostat probe the start and stop of the compressor are timed through parameters COn and COF..
  • Defrost is performed through a simple stop of the compressor. Parameter ?IdF? controls the interval between defrost cycles, while its length is controlled by parameter MdF..
  • SAFETY PRECAUTIONS Check the supply voltage is correct before connecting the instrument. Do not expose to water or moisture: use the controller only within the operating limits avoiding sudden temperature changes with high atmospheric humidity to prevent formation of condensation. Warning: disconnect all electrical connections before any kind of maintenance. Fit the probe where it is not accessibl....
Check Stock