Husky 12 Volt Inflator with Pressure Gauge to130-psi

  • 165 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered @ 90 PSI pump, enable long tool run time with quick recovery for the portable air compressor.
  • High efficiency motor of the electric air compressor is made for easy start up in cold weather or extension cord application. [14 ga or larger, 50 ft. (15.2 m) or less].
  • 78.5 dBA noise level of the 6 gallon air compressor is made for a quiet work environment.
  • High flow regulator and couplers of DEWALT portable air compressor are designed to maximize air tool performance.
  • Long life oil free pump for maintenance free operation.
  • Console cover protects controls and is removable to allow easy repair.
  • Outlet tube rerouted to avoid being catch point.
  • 30 lb weight makes unit easy to carry/store.
  • 2 universal couplers to easily support two users.
  • Ball drain valve for quick & thorough tank draining.
Check Stock

VIAIR 400P - 40043 Portable Compressor Kit. Tire Pump, Truck/SUV Tire Inflator, For Up to 35 Inch Tires

  • 2.0 SCFM @ 90 psi of the portable air compressor allows for quick compressor recovery time, per ISO1217.
  • 1.5 gallon tank in shroud of the electric air compressor is easy to carry, includes water drain valve and rubber feet.
  • 150 psi max tank pressure of the PORTER-CABLE air compressor stores more air in the tank for longer tool runtimes.
  • Durable oil-free pump for long life and no maintenance.
  • Low Amp 120V motor starts easily in cold weather or with extension cord.
  • Low Noise at 79 dBA (Tested per ISO3744) for a quieter work environment.
  • Fully enclosed design provides protection from hot or moving parts.
  • 25' coil hose and 8 pc accessory kit facilitate a number of inflation tasks.
Check Stock

Vertical 30 Gallon Portable Air Compressor - 5.5CFM, 2HP, 120V/240V, Single Stage, 1 Phase (Campbell Hausfeld VT6358) , Blue

  • 2.0 SCFM @ 90 psi of the portable air compressor allows for quick compressor recovery time, per ISO1217.
  • 1.5 gallon tank in shroud of the electric air compressor is easy to carry, includes water drain valve and rubber feet.
  • 150 psi max tank pressure of the PORTER-CABLE air compressor stores more air in the tank for longer tool runtimes.
  • Durable oil-free pump for long life and no maintenance.
  • Low Amp 120V motor starts easily in cold weather or with extension cord.
  • Low Noise at 79 dBA (Tested per ISO3744) for a quieter work environment.
  • Fully enclosed design provides protection from hot or moving parts.
  • 25' coil hose and 8 pc accessory kit facilitate a number of inflation tasks.
Check Stock

Valve Spring Compressor, Auto Compression Clamp Tool Service Kit for ATV, Car, Motorcycle,Small Engine Vehicle Equipment,Valve Spring Compressor ToolsAutomotive Tool C Clamp Service Set,10 Pcs

  • Valve Spring Compressor C Clamp Tool Set Service Kit includes 5 adaptors to correctly fit, install, and remove automotive valve springs,Suitable for your motorcycle, ATV, UTV, car, and other small engine vehicles and equipment.
  • All collets are 1.75 inches (4.4cm) long with 9.5-inch (24.1cm) maximum jaw openings.
  • Valve Spring Compressor Small Engine, This toolset is used to easily and safely compress valve springs for removal or installation.The forged steel construction of this set provides superior strength and hardness. The C-Clamp will not bend or twist under the stress of compressing valve springs. The oxide finish on the set components resists rust and corrosion. The surface finish of each part is smooth and provides for easy use under high compression..
  • Valve Spring Compressor Tools -come packaged in a high-impact case that holds each part securely. The parts will remain organized and safe while stored or in transport, and the case stacks and stores away conveniently.1 x Spring Compressor ""C"" Clamp ,5 x Adaptors ,3 x Extension Screws ,1 x Compression Bar ,1 x Storage Case.
  • Solid Valve Spring Compressor Kit to effortlessly reset your valve springs. The Orion Kit comes fully stocked with 5 collets to fit hundreds of makes and models, such as motor....
Check Stock

PORTER-CABLE Compressor, Oil-Free, UMC Pancake, 13-Piece Accessory Kit, 6-Gallon, 150 PSI (C2002-WK)

  • 150 psi max tank pressure of the portable air compressor allows more air in the tank for longer tool runtimes.
  • 2.6 SCFM @ 90 psi of the electric air compressor allows for quick compressor recovery time, per ISO1217.
  • 6 gal Pancake style tank of the PORTER-CABLE air compressor is made for stability, includes water drain valve and rubber feet.
  • Low Amp 120V motor starts easily in cold weather or with extension cord.
  • Durable oil-free pump for long life and no maintenance.
  • Shroud, handle and console cover protects vital components, makes unit easier to carry and includes cord wrap.
  • Two regulated, factory installed air couplers to easily support two users.
  • 13 pc accessory kit for a variety of inflation and cleaning tasks.
  • 150 psi max tank pressure stores more air in the tank for longer tool run times.
Check Stock

PORTER-CABLE C2002 Oil-Free UMC Pancake Compressor

  • 150 psi max tank pressure stores more air in the tank for longer tool run times.
  • 2.6 SCFM at 90 psi allows for quick compressor recovery time, per ISO1217.
  • Six-gallon pancake-style tank for stability, includes water drain valve and rubber feet.
  • Low-amp 120-volt motor starts easily in cold weather or with extension cord.
  • Durable oil-free pump for long life and no maintenance.
Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • Each time your compressor runs, the moisture in the air condenses in the tank. This moisture must be drained daily from the tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank..
  • The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
  • This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
  • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
Check Stock

Zijia 1/2" AC 110V Automatic Timed Water Tank 2-way Direct-acting Drain Valve US Plug

  • Equipped with a ball valve filter, split with drain valve, an L-shaped structure.
Check Stock

Tanstic 12Pcs Valve Spring Compressor with Valve Lapper Set Auto Compression C-Clamp Tool Service Kit with Valve Lapping Grinding Stick Tool for Motorcycle, ATV, Car, Small Engine Vehicle Equipment

  • 【Package Includes】Tanstic 12pcs valve spring compressor set contains everything you need to remove and compress valve springs: 1pc solid valve spring compressor including 1pc wide C-clamp, 3pcs extension screws, and 5pcs pusher adapters in 5 sizes and 1pc hand level, 2pcs valve lappers. Practical set for easier work..
  • 【Valve Spring Compressor】Each component is made from forged steel which guarantees superior strength and hardness, so that our C-Clamp will not bend or twist under the stress of compressing valve springs. Compressor surface is oxide finished for rust- and corrosion-resistance. Quality material for longer service life..
  • 【Practical Size】Multiple adapters and pusher can meet your different auto mechanical needs. Valves for the Following Sizes: 16mm (OD.) 19mm (OD.), 25mm (OD, 30mm (OD.). Also with hard plastic storage case for easy carry, safe storage, and quick organization..
  • 【Valve Grinding Lapping Stick】This tool set helps matching valve seats during the engine top-end is rebuilding. Suitable to aid in cleaning of carbon deposits off valve seats. Hardwood long Easy-grip handle for better control, less fatigue and more productivity. Rubber grinding head is easy to use and wear-resistant..
  • 【Wide Application】Tanstic 12pcs s....
Check Stock

Porter Cable FC350A/FR350A/FM350A OVERHAUL Kit # 910450

  • Thanks to the elbow and adapter with pre-applied thread sealant, this valve kit works on air compressors with 1/4 or 3/8 inch NPT drain valve..
  • The 10” braided steel hose is flexible which prevents breaking and kinks..
  • Featured a quarter turn drain valve, it makes draining water out of the compressor tank much easier and you don’t have to do that on your knees anymore..
  • Installation is simply enough and once the old peacock is removed, it will be threaded in with little difficulty..
  • Fittings are made of heavy duty brass which is corrosion resistant. Working Pressure: 175 PSI, Blasting Pressure: 475 PSI & Max Temperature: 200 ℉.
Check Stock

DEWALT Air Compressor for Trim, 200-PSI Max, Quiet Operation (DWFP55130)

  • 3.0 SCFM delivered @ 90 PSI pump, 2.5 gallon tank and 200 max PSI of the portable air compressor enables large amount of nails to be fired and provides quick recovery.
  • Durable oil free pump of the electric air compressor provides extended maintenance-free operation.
  • Low 71.5* dBA of DEWALT portable air compressor allows for quieter operation (*Tested per ISO3744).
  • Low 12 amp draw motor provides easy start-up and reduces breaker tripping.
  • Lightweight (36 lbs), thin (12.5 inch) and compact design is easy to carry and store.
  • Compressor can be operated/stored in either the vertical or horizontal position.
  • Roll cage and control panel provide protection to key compressor components.
  • Dual quick couplers to easily support 2 nailers.
  • Ball valve drain allows for quick and thorough tank draining.
Check Stock

TUXING PCP Air Compressor,Auto-shutoff 4500Psi/30Mpa Oil/Water-Free Set-pressure Air Gun and Paintball Tank Pump with Water/Oil Separator,Built-in Power Adapter(110V AC or 12V Car Battery)

  • 【Portable design and light weight 】( 22 pounds) makes it easy to transport to the range or field.
  • Features a sturdy carry handle and rubber feet.
  • 【Built-in Power Adapter】Can be operated using an electrical outlet or vehicle battery with flexible AC/DC (110V/12V) operation..
  • 【Adjustable pressure】- The PCP compressor features a Adjustable pressure gauge and a temperature gauge. The compressor can easily achieve 4500Psi and automatically stop filling when the preset air pressure is reached..
  • 【Built-in drain system】Inlet drain valve system,remove deposit auto-matically,below with drain valve screw to avoid and reduce maintenance.
  • 【Fast charging speed】The maximum pressure of this product is 4500PSI, which makes it only takes 15min for the pressure of a 0.5L diving bottle to rise from 0MPa to 30MPa.
Check Stock

FUNTECK Extended Tank Drain Valve Assembly Kit for Air Compressor with 1\\/4 or 3\\/8 inch NPT Drain Valve

  • Thanks to the elbow and adapter with pre-applied thread sealant, this valve kit works on air compressors with 1/4 or 3/8 inch NPT drain valve..
  • The 10” braided steel hose is flexible which prevents breaking and kinks..
  • Featured a quarter turn drain valve, it makes draining water out of the compressor tank much easier and you don’t have to do that on your knees anymore..
  • Installation is simply enough and once the old peacock is removed, it will be threaded in with little difficulty..
  • Fittings are made of heavy duty brass which is corrosion resistant. Working Pressure: 175 PSI, Blasting Pressure: 475 PSI & Max Temperature: 200 ℉.
Check Stock