Categories

Best Computer Case Psu

Microsoft Wireless Optical Desktop 1000 (PC & Mac)

  • Strong 1000-Watt PSU providing stable power source for ATX12V / EPS12 desktop computer with dedicated PCI-Express graphic card. ** Attention: DOES NOT support Bitcoin/Ethereum mining application.**.
  • High efficiency means less heat dissipation plus less electricity wasted: typical 85.77%, average 84.16% -- over 82 percent across all load level, meets and exceeds 80plus standard. Full range AC input Active PFC technology: 100- 240V auto-select..
  • Quad blue color LEDs turns on when the PSU is on. Smart fan controller with on-board thermostat dynamically control fan speed to ensure ultra quiet operation..
  • POWER CONNECTORS INCLUDED: 24pin (20+4) Main, 1 x 4+4 12V (supports standard 2x2 P4 or 2x4 8pin 12V board), 2 x 6+2 PCIe (for graphic card that requires 6pin and/or 8pin), (5) SATA, (2) Molex 4pin Peripheral, Floppy Drive.
  • Black casing with black braided sleeving on all cables. Long cables to support standard mid tower chassis or bottom-mount gamer case. UL certified 5-foot safety AC cord and black installation screws are included..
Check Stock

Cable Matters 2-Pack ATX Power Supply 4-Pin CPU Extension Cable - 8 Inches

  • PSU to mobo CPU extension cable lengthens the connection between an existing power supply and the P4 connection on a motherboard.
  • 4 pin CPU extension cable extends the power connector from a 12V ATX power supply to a motherboard CPU power connection.
  • Cable management solution for connecting an older power supply to a new motherboard in a bottom mount computer case.
  • PC builder essential cable for ATX power supplies that ship with a short 4 pin CPU power cable.
  • Cost-effective 2-pack provides a spare cable to keep in your toolkit.
  • Sturdy ATX PSU extension cable has a male 4-Pin P4 connector and a female 4-pin P4 connector with latches for a secure connection to prevent accidental disconnections.
  • Compatible with popular ATX power supplies such as the Antec Basiq BP350 350 Watt Power Supply, Logisys Corp. 480W 240-Pin Dual Fan 20+4 ATX Power Supply, Rosewill 350-Watt Power Supply.
Check Stock

Lian Li O11DXL-1-4 PCI-E 4.0 Upright Display Card Kit for O11 Dynamic XL only Vertical Graphics Card Holder for O11D XL

  • Computer case with premium look. Dimensions: 9.0 x 19.4 x 18.8 inch. Strong steel structure with plenty of room for all components, make it durable....
  • Gaming PC case with double hinged flip tempered glass side panels allows for a great view of your RGB components and open/close. Changing motherboard....
  • Full tower chassis with ease installation design. Optimized 9 drive mountings, modular PSU shroud cover and multi-way fan/radiator bracket. Change....
  • Desktop computer shell case with professional cable management solution. Hidden cable organization space behind the motherboard tray. I/O essentials....
  • Advanced cooling support with mesh front panel, mesh bottom left shroud panel, honeycomb vent design, and 3 Pre-installed 120mm ARGB fans. ensuring....
Check Stock

Marame 2PACK 120mm Fan 1500RPM 120mm x 25mm 12V Ventilation Long Life Sleeve Bearing Computer Case Fan High Performance Cooling Fan for PC Case Server Inverter Frequency Converter Cooler

  • ♥ 【2PACK 120MM FAN 1500RPM】: 120x120x25mm / 4.7x4.7x1in. Voltage: 12V.
  • ♥ 【EASY 2PIN CONNECTOR】: 2.54mm Male Power Supply interface. RED Wire is Positive.
  • ♥ 【COME WITH METAL GRILL AND SCREWS】: it can protect fingers and fan blades.
  • allows the fans to be laid flat or stand upright..
  • ♥ 【TWO WAY INSTALLATION】: Push the hot air out of your computer when mounted on the back or draw in fresh air if you mount it at the front of....
  • ♥ 【WIDELY APPLICATIONS】: Cooler for Power Supply / PSU / RV fan / PC Computer Case / Server / Household Electrical Appliances / Industrial....
Check Stock

Zeus GAMDIAS Gaming ATX Mid Tower Gaming Computer PC Case with Tempered Glass and ARGB LED Strip, RGB Motherboard Sync

  • ...fans and 350mm long graphics card, high CPU cooler up to 168 mm, additional 2.5" SSD trays at the back panel, and easy-access dust filters at the top.
  • Excellent Air Flow for Low Temperature: The Mid Tower ATX PC Case is allowed to upgrade for Top: 2 x 120mm, 2 x 140mm computer case fans.
  • Rear: 1 x 120mm for outstanding ventilation. With AIO coolers up to 360mm for the front and top, it's the best gaming case to keep your PC temperature low..
  • Innovative and Extraordinary Design: Gamdias Mid Tower Case with innovative front RGB lighting panel with mixed glossy and matte black design brings the gaming PC chassis market a different and elegant design choice and makes your system builds astonishing..
  • Great Expandability for Your System Config.: With 2 x 3.5” HDD bays or 2 x 2.5” HDD Cages/ 2x 2.5" Tray, USB3.0 x1, USB2.0 x2, and the LED button, the desktop pc case gives DIY builders ultimate flexibility to personalize their PC. Furthermore, it supports different mobo from EATX, ATX, Micro-ATX, Mini-ITX . 7 expansion slots allow you to fully utilize your motherboard’s expandabilit....
Check Stock

LIAN LI O11 Dynamic EVO Gaming PC Case E-ATX Desktop Computer Case - Mid Tower Chassis with Flexible Mode and Configuration, Tempered Glass Panel, USB Type-C Port, Easy Cable Management (Harbor Grey)

  • Gaming PC Case features a pure aesthetic, flexible modes and configurations for a high-performing personal build. The solid and durable O11D EVO computer case is crafted from 4mm aluminum and 1mm steel structure. The 4mm dark tinted tempered glass panels make it easy to show the RGB components and your personalities.
  • Computer Case with Optimized Cooling & Modular Design – The top mesh panel is upgraded with optimal airflow and dust filtering ratio. By using optional kits, there are many configuration choices for air and water cooling. Sufficient space to accommodate 3x 360mm radiators, and up to 10 fans.
  • Desktop PC Case with Ample Drive Space - Offers multiple storage drive mounting spaces that support up to 9x SSDs or 6x HDDs + 3x SSDs. You can remove the drive cage to make room for a second PSU or relocate it to a lower position. Thanks to the roomy interior, it is compatible with most of the current 4090 CPU video cards.
  • Grey/Black Case with Effortless Cable Management - Cable management is hassle-free within the O11D EVO thanks to its dual-chamber design and removable bracket. Removal I/O module includes 2 x USB 3....
Check Stock

Micro-ATX Case, MOROVOL 2pcs 120MM ARGB Fans Computer Case USB 3.0×2 Micro ATX Tower Computer Case Opening Tempered Glass Panel & Mesh Front Panel Airflow MATX Gaming PC Case (TW7, Pink)

  • ...This PC case Included a ARGB controller and 2pcs ARGB fans. With the ARGB controller, through connecting 5V 3PIN interface of motherboard to achieve fans sync color. Each addressable ARGB fan offers 16.8 million colors to create a stunning lighting effect. The high light-transmitting glass side panels showcase your computer's ARGB colors. (Note: 12V 4PIN motherboard is not suitable for motherboard control mode, and it is recommended to use button control only.).
  • 【Top I/O Panel】The micro pc case TW7 is designed with 2 x USB3.0 ports for faster transfer speed. With HD audio and microphone ports to enjoy lossless sound quality. Dedicated LED buttons can be used to control 19 lighting modes for ARGB fans..
  • 【Proper Interior Space】This Micro ATX mid tower case provides an appropriate space to build your system and manage the cables. It supports to install 1 x 2.5" SSD & 2 x 3.5" HDD or 2 x 2.5" SSD & 1 x 3.5" HDD, and supports Micro ATX/ITX motherboard, 120mm water cooling, maximum length 280mm GPU, maximum length 160mm CPU air cooling and maximum length 160mm PSU..
  • 【The Superior Micro Case】MOROVOL TW7 computer case which is stylish and compact, has a extreme cooling effect. It is equipped with expensive magnetic tempered glass side door and a dus....
Check Stock

MOROVOL Mesh Micro-ATX Tower Computer Case, 2PCS × ARGB Fans Pre-Installed and 2×USB 3.0 Ports, Magnetic Design Opening Tempered Glass Panel & Mesh Front Panel Mini-ITX Gaming PC Case, White

  • ...This PC case Included a ARGB controller and 2pcs ARGB fans. With the ARGB controller, through connecting 5V 3PIN interface of motherboard to achieve fans sync color. Each addressable ARGB fan offers 16.8 million colors to create a stunning lighting effect. The high light-transmitting glass side panels showcase your computer's ARGB colors. (Note: 12V 4PIN motherboard is not suitable for motherboard control mode, and it is recommended to use button control only.).
  • 【Top I/O Panel】The micro pc case TW7 is designed with 2 x USB3.0 ports for faster transfer speed. With HD audio and microphone ports to enjoy lossless sound quality. Dedicated LED buttons can be used to control 19 lighting modes for ARGB fans..
  • 【Proper Interior Space】This Micro ATX mid tower case provides an appropriate space to build your system and manage the cables. It supports to install 1 x 2.5" SSD & 2 x 3.5" HDD or 2 x 2.5" SSD & 1 x 3.5" HDD, and supports Micro ATX/ITX motherboard, 120mm water cooling, maximum length 280mm GPU, maximum length 160mm CPU air cooling and maximum length 160mm PSU..
  • 【The Superior Micro Case】MOROVOL TW7 computer case which is stylish and compact, has a extreme cooling effect. It is equipped with expensive magnetic tempered glass side door and a dus....
Check Stock

MOROVOL Mesh Matx (Micro-ATX) Case Tower Computer Case, 2PCS × ARGB Fans Preinstalled and 2×USB 3.0 Ports, Magnetic Design Opening Tempered Glass Panel & Mesh Front Panel Gaming PC Case(TW7-S2-BL)

  • ...This PC case Included a ARGB controller and 2pcs ARGB fans. With the ARGB controller, through connecting 5V 3PIN interface of motherboard to achieve fans sync color. Each addressable ARGB fan offers 16.8 million colors to create a stunning lighting effect. The high light-transmitting glass side panels showcase your computer's ARGB colors. (Note: 12V 4PIN motherboard is not suitable for motherboard control mode, and it is recommended to use button control only.).
  • 【Top I/O Panel】The micro pc case TW7 is designed with 2 x USB3.0 ports for faster transfer speed. With HD audio and microphone ports to enjoy lossless sound quality. Dedicated LED buttons can be used to control 19 lighting modes for ARGB fans..
  • 【Proper Interior Space】This Micro ATX mid tower case provides an appropriate space to build your system and manage the cables. It supports to install 1 x 2.5" SSD & 2 x 3.5" HDD or 2 x 2.5" SSD & 1 x 3.5" HDD, and supports Micro ATX/ITX motherboard, 120mm water cooling, maximum length 280mm GPU, maximum length 160mm CPU air cooling and maximum length 160mm PSU..
  • 【The Superior Micro Case】MOROVOL TW7 computer case which is stylish and compact, has a extreme cooling effect. It is equipped with expensive magnetic tempered glass side door and a dus....
Check Stock

MOROVOL ATX PC Case with 4PCS RGB Fans Airflow Mid-Tower Gaming case with Diamond-Shaped Mesh Front & Tempered Glass Side Panel Computer Case 621-N4

  • 4PCS RGB Fans for Gifts - The 621 pc case is pre-installed with 4 RGB 120mm case fans, which are fixed RGB lighting capable and can provide....
  • Perfect Airflow - The diamond mesh front panel of this ATX case is the optimal cooling performance panel that features a stereo contour. While this....
  • Precise Design - Morovol 621-N4 computer case supports ATX / Micro-ATX / Mini-ITX, the GPU is up to 300mm, the PSU is up to 160mm and the CPU cooling....
  • Tempered Glass Side Panel - The Mid-tower case is designed with removable tempered glass side panel. The precise design makes this tower case both....
  • Excellent I/O Panel - The 621 gaming case provides fast and easy access to the I/O panel, with 1 USB 3.0 port (faster data transfer), 2 USB 2.0 ports,....
Check Stock

LIAN LI Mesh Airflow ATX PC Case Gaming Computer Case Mid-Tower Chassis with 3 ARGB PWM Fans Pre-Installed, Mesh Front Panel, Tempered Glass Side Panel, Water-Cooling Ready(LANCOOL 205 MESH, Black)

  • Improved Airflow Computer Case. Upgraded mesh front panel enables greater air ventilation yet dust free with magnetic dust filters on the top and bottom. Liquid cooling ready.
  • Include 3 ARGB LED Lighting PWM Fans, two front 140mm fans and one rear 120mm fan. 7 color and 7 lighting modes are controlled by the C/M button on the top of the case. Sync to the motherboard at the 8th Mode.
  • Gaming PC Case with tempered glass side panel allows for a great view of your RGB components. Changing motherboard size supporting ATX, Micro ATX (mATX) and Mini-ITX.
  • Mid-Tower Chassis with ease installation design. Removable SSD mounting brackets, swappable top fan brackets and bottom side panel PSU and HDD bay. Change with no more pain.
  • Desktop Computer Shell Case with professional cable management solution. Extra space behind the motherboard tray for hidden cable organization. I/O essentials, 2xUSB 3.0, Power button, C/M button, audio out and in on the top.
Check Stock

Mining Rig Frame 8 GPU 70mm Slots with 8 Fans Crypto Ethereum Miner Case with Barebone Motherboard for ETH/ZEC Cryptocurrency System Machine with SSD/RAM Without GPU/PSU

  • 【8 GPU Mining Rig Parameter】Inter1(R) Celeron B75 Motherboard: 8X PCI-E spacing 70MM.
  • 【8 GPUs Support】8 GPU 75mm expansion slots in the mining computer case. The mining case support 8 PCS 3070/6800/6800XT 6900/6900XT GPUs....
  • 【8 Fans Support & Fan Controllers】 The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans....
  • 【4 USB Ports】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner case has 4 USB ports,....
  • 【Mining rig case】The rig doesn't come with GPU and PSU. Including: motherboard, CPU, power switch line, 128GB SSD, 4G RAM, 2500-4500 rpm cooling....
Check Stock

SENKAUTO Mining Rig Case 8 Ports GPU Mining Frame Case Mining Motherboard 8 Cooling Fans Supported(4 Preinstalled) Mining Machine System with 4GB RMA, CPU (Without GPU/PSU) (Black)

  • Support 8pcs GPUs: The mining rig case support 8 GPUs. Support ATX motherboard, built-in, external dual PSU hosting, PSU mounting, hard drive. 8 GPUs can be installed at the same time, which greatly improve the performance of the BTC/ETH/ETC mining machine case..
  • Generous Space between GPUs: The Gap between GPU ports is about 65mm, it can ensure high performance, low power consumption for mining..
  • Support 8 Cooling Fans: The mining rig case support 8 cooling fans and preinstalled with 4* 2500rpm cooling fan. 2* fan speed controller, you could adjust the fan speed according to your need. Great heat dissipation is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency..
  • Support ATX/1U/2U Power Supply: The mining rig frame made of highest quality steel, with the finest craftmanship, which is easy to install and has a sturdy structure. With a larger room for power supply, you can install standard ATX PSU directly without modifications. Keeps the machine perfectly organized while it holds the least amount of heat possible..
  • Mining rig case package: Including: motherboard, CPU, power switch line, 4G RAM, 2500rpm cooling fan * 4, fan speed controller*2, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package. The miner machine system doesn't in....
Check Stock