Best Concrete Anchor Assortment
Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt
- Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
- Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
- Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
- For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
- Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check StockSleeve Anchor 3/8-Inch by 1-7/8-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100
- CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
- HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
- CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
- CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
- SIZE: The diameter of the anchor is 3/8". The length of the anchor is 1-7/8".
Check StockSleeve Anchor 5/16-Inch by 2-1/2-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100
- CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
- HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
- CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
- CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
- SIZE: The diameter of the anchor is 5/16". The length of the anchor is 2-1/2".
Check StockQty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt
- Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
- Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
- Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
- Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock50 Pcs 3/8 x 3 Zinc Plated Concrete Anchors Masonry Screws Heavy Duty Carbon Steel Concrete Anchors and Screws Kit Hex Head Large Diameter Concrete Anchor Bolts for Brick Blocks Cement
- Adequate Quantity: there are 50 pieces of concrete anchors, suitable for large volume work, meeting your daily needs, and can also be shared with your family and friends.
- Pocket Size: each of concrete screws and anchors is about 3/8" x 3", and weighs only 1.3 ounce/ 37 g, fine workmanship, and easy to carry around, providing you with much convenience.
- Quality and Sturdy Material: hex concrete anchors are made of carbon steel, with galvanized surface to resist rust, and feature higher hardness, hard and not easy to deform, especially practical for dry environment.
- Novel Design: featuring low torque threads, masonry screws have deep and clear threads, which can make concrete penetration easily, and also simple to install.
- The anchor has a finished hex washer head with anti rotation serrations to keep the anchor away from backing out.
- Wide Range of Applications: hex head concrete screw anchor is mainly designed for concrete, masonry, brick or block.
- Note that using a standard drill bit for installation, the drill bit size is the same as the anchor diameter.
Check StockBoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK
- Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
- Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
- Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
- Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check StockChamp Instant Floor Plate – for Installing Floor Anchor Pots in New Concrete Slab - Professional - Made in USA
- STRUCTURAL REINFORCEMENT – It serves as permanent ground reinforcement underneath the concrete slab. Having this plate installed improves the anchor....
- HELPS BALANCE THE ANCHOR POT – The Champ Instant Floor Plate is the perfect base, distributing the weight of the anchor pot while keeping the anchor....
- EASY INSTALLATION – Use when pouring a new concrete floor for added strength. Simply install the Floor Plate onto each anchor pot, set anchor pots....
- SAVE MONEY – This floor plate, along with the anchor pot and lid, is a complete anchoring system that makes do-it-yourself installations easier and....
- HEAVY DUTY – Whether used in permanent installations or as a floor guide, these instant floor plates are strong and reliable. It is 100% steel, and....
Check StockDrive Pins Zinc Alloy - 1/4 X 1-1/2 - Qty 1000
- Hammer Drive Pins (or just drive pins) attach fixtures to solid concrete or certain types of concrete blocks..
- Using a predrilled hole, they are installed with hand tools, typically with a hammer strike, to drive the pin into the anchor body expanding the anchor to form a tight fit..
- The washer on the anchor retains the pin and guides it during the driving installation..
- Anchor Diameter Equals Hole Diameter-Makes it easy to determine hole size.
- 304 Stainless steel is durable and rust resistant.
Check StockConcrete Sleeve Anchors 1/2 x 4 - 25 Pcs Hex Head Sleeve Anchors Concrete Bolts Hex Nut Sleeve Anchor Concrete Sleeve Anchor Hex Sleeve Anchors Zinc Plated
- CONCRETE SLEEVE ANCHORS - Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
- HEAVY DUTY SLEEVE ANCHORS - Steel construction with Zinc-plated finish.
- CONCRETE HEX SLEEVE ANCHORS - This anchor is designed for use in Concrete, Block, and Brick. Ideal for hand rails, window frames, partitions, cabinets, shelves and pipe supports.
- SIZE: The head diameter of the anchor is 1/2". The length of the anchor is 4".
- Package Quantity 25 Pcs Hex Nut Head Concrete Sleeve Anchors.
Check StockCONFAST 3/8\ Lag Shield Anchor Long (12 per Box)
- Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration.
- Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place.
- Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications.
- Ultimate tensile strength is 1,190 lb. in 2,000-psi concrete.
- Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check StockWej-It Ankr-TITE ATS Wedge Anchor, 304 Stainless Steel, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 1/4\ Diameter, 3-1/4\ Length, 2-1/4\ Threaded Length (Pack Of 20)
- Start that DIY project you've put off for so long with this 20pc nut, bolt, and anchor sleeve assortment.
- Hardware kit features various bolts, nuts, washers, and anchor sleeves for multiple projects.
- Repair fences, burglarproof doors and windows, mount decorations, and use for concrete and masonry work.
- Keep this 20-piece hardware kit in the house or give a set as a gift to friends or family.
- Bolts measure from 3/4" to 2" long and 5/16" to 1/2" in diameter and ships with 20pcs.
Check StockVEVOR Standoff Post Base 4 x 6\(Inner Size:3.74 x 5.12\) 10 PCS Stainless Steel Adjustable Post Base Adjustable Post Anchor with Fiber Drawing Surface and Full Set of Accessories for Rough Size Lumber
- [Anchor Your Cemented Posts]: The BISupply U-Shaped 4x4 Post Anchor Concrete Brackets 4 Pack fits standard 4 x 4-inch (10.2 x 10.2 cm) square posts.
- (2) 3.75-inch (9.5 cm) long closed sides with predrilled screw holes and (2) 3.4-inch (8.6 cm) long open sides.
- [Anywhere Posts are Needed]: Use as deck footing anchor, patio post holder, pergola anchor, or gazebo stabilizer for posts up to 4 feet (1.2 m) high.
- Anchor post spike holder stands 3 inches (7.6 cm) above surface while spike end pokes 7 inches (17.8 cm) into concrete to give you 10 inches (25.4 cm) total.
- [Install Easily]: Set the rebar spike in wet concrete before it cures and let dry for a permanent post mount.
- Insert your wood post and install screws (not included) through the 10 predrilled holes (5 on either side) that sit approximately 2 inches (5.1 cm) apart.
- [Built to Last]: Post hole spike anchor constructed of durable steel with a black powder coat finish for maximum longevity.
- 0.6-inch (1.6 cm) diameter rebar spike adds strength and stability.
- [Package Contents]: Wood post anchors package includes 4 individual post holder deck brackets.
- Wooden posts and installation screws not included.
Check StockAkord Anchor Plastic Assortment Kit 130PCS, Nylon Mushroom Head, Wall Anchors and Screws for Drywall Anchors, Hollow Wall, Concrete Anchors, 2 Types & 8 Sizes Different Specifications, 65 Set
- MORE SIZES AND CHOICES: Anchor Plastic Assortment Kit has 2 Types & 8 Sizes Nylon Mushroom Head Anchor. You will have different specifications anchors for hollow wall, which can solve different problems..
- PRODUCT FEATURES: Constructed of high-quality materials for long-lasting durability. Can Be Hammered All The Way Into the Hole Without Pre-Expansion, Nylon Body Provides Insulation Between Drive Screw and Work Surface..
- MULTI PURPOSE: Designed for Use in A Variety of Substrates Such as Concrete, Stone, Solid Brick, Solid Block, Hollow Brick, Hollow Block and Hollow Slab, Quick and Easy to Install and Remove..
- HANDY BOX: All of the Anchors will be packed in a sturdy plastic box, can be used as a storage box. Not only give you the best Anchors, but also the best storage system..
- 30 DAYS REFUND WARRANTY: AKORD offers a free replacement or refund against any manufacturer defects. Please feel free to contact us if you have any questions about our products..
Check Stock