Categories

Best Concrete Core Steel Floor

Champ Floor Anchor Pot with Floor Plate – 12 Pots and 12 Floor Plates – 3-1/2 in Diameter - 3/8 in Chain Grommet Thickness - 4 in Sleeve Height - Professional - Made in USA

  • STRONG AND RELIABLE: A 10-ton chain with a solid steel anchor pot that anchors the car down to the ground ensuring safe frame and body repair..
  • QUICK AND EASY INSTALLATION: Installs in your existing concrete floor with a core drill or use our Floor Plate.
  • REMOVABLE CHAIN: The included chain is easily detachable from the anchor pot so you don’t need to replace the pot if your chain breaks..
  • HASSLE-FREE REINSTALLATION: This floor anchor pot is easy to move and reinstall any number of times. This allows for expanding or rearranging your....
  • PREMIUM WORKMANSHIP: Made in USA of the highest quality materials. Solid steel pot construction with high quality 10-ton chain for long life and....
Check Stock

Prolux Core Heavy Duty Single Pad Commercial Polisher Floor Buffer Machine Tile Scrubber (13 Inch Medium Duty w/Hard Brush Only)

  • ... buffers use buffer heads that only spin in one direction. This can cause swirl and sanding marks, gouges and other damage to your floors. The Core uses a Random Orbit motor to clean in both directions and avoid these issues..
  • STANDARD VERSION - This version includes the heavy-duty scrubbing brush for hard surfaces, concrete, tile and more. For other floor surfaces check out the Prolux Core in the "Deluxe Version" (loaded with tons of cleaning pads) or simply buy the additional Prolux cleaning pads you need..
Check Stock

5' Wet Drill Core Bits for Concrete and Hard Masonry, 10mm Segment Height, 14' Drilling Depth, 1-1/4'-7 Arbor, Wet Only

  • MULTIPURPOSE - designed to drill concrete, concrete with light steel reinforcement or hard masonry.
  • HEAVY DUTY - embedded diamond concentration guarantees longer core life and efficient drilling.
  • WET ONLY - recommended to use with handheld core drills or dedicated core drill rigs (rotary mode only).
Check Stock

Eapele Barbell Storage Holder for 1\ and 2\ Olympic Bars EZ-Bars Trap Bars (5 Bars)

  • ... to 5 of your Olympic bars, EZ-bars, or trap bars off of the floor..
  • Body solid --- Made out of laser cut Q235 carbon steel pieces and with its perfectly balanced design.Heavy 9 Ga. steel tubes, 3 Ga. steel base.Heavy gauge steel bottom keeps the bars straight and upright. Note: Eapele barbell floor stand comes with concrete anchors, and please bolt the base on the floor to prevent falling over..
  • Durable powder coated finish --- Reinforced with premium coating, this holder's hammered finish protects its overall structure from scratches, ensuring that its function, style will last for years.Welds are clean and even..
  • Holds up to 5 bars with diameter of 2" or less --- Bar hole diameter: 2". Dimensions: 12"x12". Height: 6". Come with concrete anchors, please bolt it on the floor to prevent falling over..
  • Covered by 18 months warranty --- 30-day return window.If there are any issues, contact seller through amazon message system. Note: This kit only include 2pcs sleeves which only suit for 2pcs 1" barbell storage not for 5pcs 1" barbells..
Check Stock

Cougar HD Supreme Wet Concrete Diamond Core Drill Bit 13″ Diameter X 1-1/4″-7 Threaded Arbor for Drilling Reinforced Concrete with Rebar, Hard Concrete, Granite, Brick, Block, & More (13-inch)

  • Use Cougar HD Supreme wet diamond bits for drilling cured concrete with light to medium steel reinforcing. Heat-treated steel core barrels are designed to withstand the demands of high pressure..
  • The pointed segments reduce drag and penetrate quickly. The result is faster, straighter holes and higher productivity. Also great for drilling brick, block and various stone materials..
  • Use with all wet rig-mounted core drilling machines..
  • Specs are 13″ Diameter X 15″ barrel length x 1-1/4″-7 Threaded Arbor. 15″ barrel length, 17″ overall length (arbor + barrel)..
  • This concrete diamond core bit is US made and has a lifetime warranty with free return shipping. If it ever breaks, warps, cracks or shows any indication of a material defect (being used for its intended purpose), or if the bond between the diamond segment and the steel core becomes separated at any time, it will be replaced free of charge!.
Check Stock

Diamabrush By Malish 941601202 16-inch Concrete Prep Plus Tool, 25 Grit, Counter Clockwise with NP9200 Clutch Plate and 1.5-inch Riser

  • Abrades the surface to prep for difficult jobs. The ultimate concrete prep tool for hard-to-prep surfaces..
  • Perfect for removing a thin layer of paint or epoxy. This new heavy duty prep tool is ideally suited to prep concrete floors for an application of paints, epoxies, or stains..
  • Uses a 25 diamond grit bonded to metallic backing and assembled to flexible steel spring blades.
  • Flexible blades designed to always remain in contact with the floor regardless of floor imperfections.
  • The concrete prep Plus tool can be used with any floor buffer or auto-scrubber.
Check Stock

Delta Diamond Cougar HS 14 Inch Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .125 X 1\-20mm Arbor (14\)

  • GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 14" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the d....
Check Stock

Delta Diamond Cougar HS 10 Inch Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .095 X DM-7/8\-5/8\ Arbor (10\)

  • GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 10" diameter X .095 thick with a standard DM-7/8"-5/8" Arbor. Fits most 10" concrete saws and masonry saws. Make sure to check your saws arbor to ensure correct fitment. Max. 6,115 rpm..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamo....
Check Stock

Delta Diamond Cougar HS 12 Inch Segmented Diamond Saw Blade Premium General Purpose Cutting of Concrete Masonry Pavers Stone .125 X 1 -20mm Arbor 12

  • GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 12" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 6,300 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between t....
Check Stock

Champ Instant Floor Plate – for Installing Floor Anchor Pots in New Concrete Slab - Professional - Made in USA

  • STRUCTURAL REINFORCEMENT – It serves as permanent ground reinforcement underneath the concrete slab. Having this plate installed improves the anchor....
  • HELPS BALANCE THE ANCHOR POT – The Champ Instant Floor Plate is the perfect base, distributing the weight of the anchor pot while keeping the anchor....
  • EASY INSTALLATION – Use when pouring a new concrete floor for added strength. Simply install the Floor Plate onto each anchor pot, set anchor pots....
  • SAVE MONEY – This floor plate, along with the anchor pot and lid, is a complete anchoring system that makes do-it-yourself installations easier and....
  • HEAVY DUTY – Whether used in permanent installations or as a floor guide, these instant floor plates are strong and reliable. It is 100% steel, and....
Check Stock

8" Wet Drill Core Bits for Concrete and Hard Masonry, 10mm Segment Height, 14" Drilling Depth, 1-1/4"-7 Arbor, Wet Only

  • MULTIPURPOSE - designed to drill concrete, concrete with light steel reinforcement or hard masonry.
  • HEAVY DUTY - embedded diamond concentration guarantees longer core life and efficient drilling.
  • WET/ROTARY MODE ONLY - recommended to use with handheld core drills or dedicated core drill rigs (rotary mode only, no wire mesh drilling).
Check Stock

Delta Diamond Cougar HS 14 Inch 3-Pack Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .125 X 1\-20mm Arbor (14\ 3pcs)

  • GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 3 Pack of 14" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond bet....
Check Stock

3-3/8 in 6.8 Amp Heavy Duty Toe-Kick Saw

  • CORMAC CQ480 walk behind concrete saw, max 20" blade with 13 Hp gasoline engine and water tank.
  • Cormac floor saws are designed for strength, durability and performance Whether cutting concrete or asphalt, the reinforced steel box frame designs....
Check Stock