Categories

Best Concrete Cutting Blade

Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders & Circular Saws - Long-Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Segmented Diamond Blades For Long-Lasting & Reliable 1.25” Depth Concrete, Cinder Block & Brick CUTTING | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class.
  • ✅ AVOID BLADE WARPAGE, Premature Wear and slow down periods with lower priced blades by relying on Makita’s advanced air flo....
Check Stock

4.5 inch Circular Saw Blade, Firecore Segmented Diamond Saw Blade for Angle Grinder Dry or Wet Concrete Cutting Wheel Disc for Concrete Stone Brick Masonry Tile

  • SPECIFICATIONS: Firecore concrete saw blade has teeth with soldered diamond segments all around. Diameter: 4-1/2 Inch (115 mm).
  • Arbor: 7/8 Inch (22.23 mm) with 20 mm Adapter.
  • Segment Height: 0.276 Inch (7 mm). Suitable for Angle Grinders, Circular Saws, Masonry Saws, Tilesaw and Gas Cutoff Cutters..
  • FAST & SMOOTH CUTTING: Universal for dry or wet cutting. With Max 12,200 RPM, this diamond circular saw blade are produced specifically for use with general masonry materials such as concrete, roof tiles, stones, bricks and rocks..
  • INCREASED OPERATING TIME: Concrete blade for angle grinder heats up slower to prolong the operating time..
  • DURABLE: Made from high-quality superabrasive diamond, this cutting saw blade offers the best combination of cutting speed, long life and a low cost per cut..
  • WIDE APPLICATION: Whether you are a construction worker, plumber, tile installer, roof worker, DIY enthusiast or work at your home studio, this circular saw blade tool is the perfect blade for you..
Check Stock

VEVOR 12" Electric Concrete Saw, 1800W Concrete Cutter 15Amp Cut-off Saw, Wet/Dry Corded Circular Saw with 12" Blade and Attachments, 4" Cut Depth Masonry Saw for Granite, Brick, Porcelain

  • ...r outstanding cutting performance. The 7" blade is sturdy enough to cut most materials..
  • Considerate Designs: The water line feeds water to the blade, decreasing dust. Secure cover blocks the flying objects during your operation. The double protection switch stops the concrete cutter from accidentally opening. Two handles can aid accurate cutting in both horizontal and vertical modes..
  • Practical Accessories Kits: Our concrete wet/dry saw is supplied with a 7" diamond blade and different tools, including a water pipe, water pump, socket, wrench, splash guard, and screws. All of these tools can help you in your cutting operation..
  • Multi-function Concrete Saw: The electric concrete saw efficiently delivers the power to cut through granite, brick, porcelain, reinforced concrete, bricks, wood, and other materials. It is perfect for factories, workshop, home, timber industries, and DIY..
Check Stock

VICSEC 110V 6800W Electric Concrete Saw 14" Wet/Dry Circular Saw with 135 Saw Blade and Rolling Pulley Masonry Cutting Tool for Granite, Porcelain, Wood,Concrete, Stone, etc.

  • 【Powerful motor and heat dissipation function】： This new circular saw concrete cutting machine has a power of 6800W and a motor speed of 4600r/min, which greatly improves work efficiency, and has 360° all-round heat dissipation, so there is no need to worry about damaging the machine under high-intensity operations，safe to use..
  • 【Dust-proof design, wet and dry use】:The tile saw adopts a dual integrated dust management system is adopted, and the dust extraction port discharges cutting debris in time.
  • the water inlet accessory is built in during wet cutting, and the convenient valve controls the flow, and the water pipe supplies water to the blade to reduce dust, Improve blade performance and life.
  • 【With rolling pulley, cutting labor saving】: The wall chaser concrete cutter has its own roller design, which saves effort, and can be flexibly installed or disassembled according to the actual situation..
  • 【Sharp cutting, all-round protection】: The cement saw is equipped with a sharp saw blade with a diameter of 350mm, and the cutting depth can reach 130mm..
Check Stock

Evolution 9 Inch Multi Material Diamond Blade with Segmented Edge, 7/8 in Bore, Multi-Purpose & Metal Cutting Diamond Blade

  • Compatible with the R230DCT Concrete Cutting Saw.
  • Multi-material Cutting: One saw & One blade will cut most common building materials including ferrous & non-ferrous metals, reinforced concrete, bricks, tiles, plastics & more saving you time and money.
  • 30x Longer Life: Up to 30x longer blade life than abrasive discs when cutting metal Diamond cutting edge is incredibly tough and can make over 1,000 cuts through steel.
  • Constant Diameter: Steel blade body with diamond cutting edge maintains its full diameter so you have maximum cutting capacity for the lifetime of the blade.
  • Cleaner & Safer: The steel body won’t shatter, unlike abrasives, which can cause serious injury Less dust, less sparks & less odour vs abrasive discs, make this a safer cutting solution.
  • Segmented rim design with sub-segmented cutting edge improves efficiency & removes debris from the cut.
Check Stock

Evolution 10 Inch Multi Material Diamond Blade With Segmented Edge, 7/8 In Bore, Multi-Purpose & Metal Cutting Diamond Blade

  • Compatible with the R255DCT Concrete Cutting Saw.
  • Multi-material Cutting: One saw & One blade will cut most common building materials including ferrous & non-ferrous metals, reinforced concrete, bricks, tiles, plastics & more saving you time and money.
  • 30x Longer Life: Up to 30x longer blade life than abrasive discs when cutting metal Diamond cutting edge is incredibly tough and can make over 1,000 cuts through steel.
  • Constant Diameter: Steel blade body with diamond cutting edge maintains its full diameter so you have maximum cutting capacity for the lifetime of the blade.
  • Cleaner & Safer: The steel body won’t shatter, unlike abrasives, which can cause serious injury Less dust, less sparks & less odour vs abrasive discs, make this a safer cutting solution.
  • Segmented rim design with sub-segmented cutting edge improves efficiency & removes debris from the cut.
Check Stock

EZARC 5 inch Diamond Blade, Segmented Stone Expert Diamond Saw Blades for Angle Grinder, 5\ Stone Blade for Cutting Concrete Granite Masonry Brick (2-Pack)

  • ★【Stone Master】EZARC diamond blade is designed for aggressive cutting on masonry materials such as granite, concrete, nature stone and brick. Whether you are a construction worker, plumber, tile installer, roof worker, paver, DIY enthusiast or work at your home studio, this cutting blade is the perfect for you..
  • ★【Speed-optimized cutting】EZARC has increased the cutting speed of its new Stone-Master Segmented rim diamond saw blade by 30% to meet the current market requirement for speed..
  • ★【Long Service Life】Thanks to premium diamond grit with hardness HRC90+ and special dimensional arrangement, our grinder masonry blade has maximum cutting life. This angle grinder concrete blade guarantees a much longer lifetime for heavy duty cutting demands..
  • ★【Fit Tools】 EZARC 5" diamond blade is suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor. Disc Size:5 Inch.
  • ★【Reliable Safety】This 5 Inch diamond blade for angle grinder is manufactured with high strength alloy steel and prime diamond matrix, which ensure spark-free cutting without burning marks on hard materials. Universal for dry or wet cutting..
Check Stock

Evolution R255DCT - 10 In Concrete Saw, 3 x Diamond Blade Bundle

  • 1 of Evolution R255DCT - 10 In Concrete Saw (Aka Circular Saw, Angle Grinder, Chop Saw, Cut Off Saw, Demo Saw, Disc Cutter, Power Cutter) - 15A Motor, No Gas - 4-1/16 In Cut - Incl Premium Diamond Blade.
  • 1 of Evolution 10 Inch Diamond Blade with Segmented Edge, 1 In Bore, Concrete, Stone, Brick Cutting Diamond Blade.
  • 1 of Evolution 10 Inch Multi Material Diamond Blade With Segmented Edge, 1 In Bore, Multi-Purpose & Metal Cutting Diamond Blade.
Check Stock

Virginia Abrasives Ultra Value Concrete Diamond Blade - Wet or Dry Concrete Tools/Masonry Tools, 14\ Saw Blades, Cutting Tool for High Speed & Walk Behind Saw, General Purpose Ceramic Blade, 14 inches

  • DIAMOND BLADE CUTTING WHEEL: Virginia Abrasives' diamond blades are the ideal concrete cutting blade for High-Speed Saws, Walk Behind Saws, and Cut-Off Saws due to their high welding strength. With a significantly stronger bond between the segment and core, our diamond saw blades are sure to offer a longer life span..
  • LASER WELDED SEGMENTS: We ensure that your tough jobs are completed quickly with our industrial diamond blade 14 inch cutter. With laser-welded segments, it extends the life of every saw diamond blade while performing to its utmost ability..
  • HIGH-LEVEL PRECISION: As one tries to reduce the strain on the concrete structure, our 14 inch concrete saw blade makes sure to provide a high-performing smooth cut. Freely choose our diamond concrete saw for easy high-speed cutting on your next project..
  • DURABLE QUALITY: Our masonry blade is made with an industrial diamond that can outperform regular blades. It is made using a circular steel cutting disc with huge 12mm segments on the outer edge that will maintain precision grinding performance for a long time..
  • OUR STORY: Virginia Abrasives was founded in the early 1970s during a period of hard rock garnet mining in the Adirondack Mountains of New York. Over time, the company's markets and product lin....
Check Stock

EZARC 4-1/2 inch Diamond Blade, Segmented Stone Expert Diamond Saw Blades for Angle Grinder, 4.5\ Stone Blade for Cutting Concrete Granite Masonry Brick (2-Pack)

  • ★【Stone Master】EZARC diamond blade is designed for aggressive cutting on masonry materials such as granite, concrete, nature stone and brick. Whether you are a construction worker, plumber, tile installer, roof worker, paver, DIY enthusiast or work at your home studio, this cutting blade is the perfect for you..
  • ★【Speed-optimized cutting】EZARC has increased the cutting speed of its new Stone-Master Segmented rim diamond saw blade by 30% to meet the current market requirement for speed..
  • ★【Long Service Life】Thanks to premium diamond grit with hardness HRC90+ and special dimensional arrangement, our grinder masonry blade has maximum cutting life. This angle grinder concrete blade guarantees a much longer lifetime for heavy duty cutting demands..
  • ★【Fit Tools】EZARC 4.5" diamond blade is suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor. Disc Size:4-1/2 Inch.
  • ★【Reliable Safety】This 4 1/2 diamond blade for angle grinder is manufactured with high strength alloy steel and prime diamond matrix, which ensure spark-free cutting without burning marks on hard materials. Universal for dry or wet cutting..
Check Stock

Virginia Abrasives Ultra Value Concrete Diamond Blade - Wet or Dry Concrete Tools/Masonry Tools 14 Saw Blades Cutting Tool for High Speed & Walk Behind Saw General Purpose Ceramic Blade 14 inches

  • DIAMOND BLADE CUTTING WHEEL: Virginia Abrasives' diamond blades are the ideal concrete cutting blade for High-Speed Saws, Walk Behind Saws, and Cut-Off Saws due to their high welding strength. With a significantly stronger bond between the segment and core, our diamond saw blades are sure to offer a longer life span..
  • LASER WELDED SEGMENTS: We ensure that your tough jobs are completed quickly with our industrial diamond blade 14 inch cutter. With laser-welded segments, it extends the life of every saw diamond blade while performing to its utmost ability..
  • HIGH-LEVEL PRECISION: As one tries to reduce the strain on the concrete structure, our 14 inch concrete saw blade makes sure to provide a high-performing smooth cut. Freely choose our diamond concrete saw for easy high-speed cutting on your next project..
  • DURABLE QUALITY: Our masonry blade is made with an industrial diamond that can outperform regular blades. It is made using a circular steel cutting disc with huge 12mm segments on the outer edge that will maintain precision grinding performance for a long time..
  • OUR STORY: Virginia Abrasives was founded in the early 1970s during a period of hard rock garnet mining in the Adirondack Mountains of New York. Over time, the company's markets and product lin....
Check Stock

3000W Electric Concrete Saw, 14 in Blade Concrete Cutting Machine Circular Saws 3800R/Min with Water Pipe/Pump Wrench Saw Blade for Concrete Granite Tile Masonry Saws

  • HIGH-QUALITY MATERIALS -The head shell of this concrete cutting machine is made of aluminum, the saw blade is made of diamond, the motor material is iron + copper, and the gear is steel. It is strong and durable. It is very suitable for cutting granite, brick, porcelain, reinforced concrete, Metal, cement, steel, wood, etc..
  • MULTIPLE ADVANTAGES - lock the switch, no need to press the switch all the time, labor saving and convenient.
  • external carbon brush design, convenient disassembly and assembly, effectively prolonging the service life of the motor.
  • aluminum alloy gear box, light weight, no deformation, more stable power transmission ..
  • REASONABLE DESIGN - water pipes supply water to the blades to reduce dust. During your operation, the safety cover will block flying objects. Double protection switch prevents accidental opening of the machine. The rotating rear handle and the positioned front handle facilitate accurate cutting in horizontal and vertical modes..
  • ADJUSTABLE CUTTING DEPTH - This concrete saw uses a 14-inch diamond cutting blade. The cutting depth can be deep or shallow (cutting depth: 2-5.1 inches), and it is strong enough to cut most materials. Perfectly meet your needs for various cutting depths..
  • SPECIFICATION - Product Size:25.59 x 15....
Check Stock

Ctzrzyt 3Pcs Reciprocating Saw Blade Carbide Tip Cutters for Cutting Concrete Red Brick Stone Masonry Saber Saw Blade

  • Reciprocating saw blade for cutting bricks, concrete, gypsum boards, lime sand bricks, and lightweight concrete blocks..
  • Suitable for cutting porous concrete, red brick, fiber cement, glass fiber reinforced plastic, epoxy resin, etc..
  • Suitable for abrasive materials. This reciprocating saw blade is designed to reduce the amount of dust generated, and the weight is optimized to....
Check Stock