Categories

Best Concrete Harder

Paint Stripper

  • The EOF 100 Electric Paint Scraper Is Up to 5x Faster Than Traditional Power Sanders with Less Vibration, Soft Start, and Ergonomic Handles for Increased Operator Comfort..
  • This Light-weight , Heavy-Duty Professional Planer Removes Varnish, Paint, Graffiti, Latex, Resins, Coatings, Solids, Greasy Dirt, Sprays & More..
  • Tool For Use On Wood, Concrete, Metal, Aircraft, Boats, Decks, Siding, Walls & more. Low Clearance - Mill Right To The Edge..
  • Dust Extaction Port For Reducing Exposure to Unhealthy Odors and Hazardous Chemicals (When Used With Dust Extraction Vacuum)..
  • Milling Head Diameter 4", Depth Adjustment 0.1 mm to 1.0 mm, 7lbs, Replaceable Carbide Milling Discs For Use On Wood/Softer Materials Included(P/N 37124000) Disc For Concrete/Harder Material Also Available(P/N 37125000)..
Check Stock

10-Piece Masonry Drill Bits Kit for Concrete, Stone, Carbide Drill Bit Set for Glass, Brick, Tile, Plastic, Ceramic and Wood Size 5/32 to 1/2 inch

  • Add Tool Versatility - Our Concrete Drill Bits Kit includes on 5/32 in. on 3/16 in, four 1/4 in. two 5/16 in. one 3/8 in. one 1/2 in bits.
  • 1/4 in. Hex Shank - All 10 drill bits are equipped with the most common 1/4 in. hex shank providing ideal solution for drilling with both impacts and hammer drills/drivers.
  • Fast & Durable - 10-Piece Large Carbide Hammer Drill Bit Kit uses sharpened ground carbide tip to deliver faster drilling into masonry materials and longer life in concrete.
  • Wide Capacity - ideal for drilling concrete, walls, bricks, ceramic, wood, glass, tiles, stainless steel and more.
  • while drilling harder materials, Water or coolant is highly recommended..
  • Efficient- These bits deliver faster starts and less walking in concrete, brick and block.
  • Wide Flute Design providing fast dust remove ability and reducing heat.
Check Stock

Lackmond SPL Series - Wet Cured Concrete Core Drill Bit - 2" Reinforced Concrete Hole Saw with Segmented Diamond Rim Configuration & 1 1/4"-7 Thread Arbor - 50020

  • VERSATILITY ON THE JOB – The SPL series can be used for a wide variety of coring applications on cured concrete, reinforced concrete, granite, and natural stone. Ideal for granite or concrete countertop installation.
  • SOFT BOND & SEGMENTED CONFIGURATION – SPL core bits are engineered with a segmented diamond rim and a slightly softer bonded segment for fast, aggressive, clean hole drilling. The softer bond allows for more exposure of diamonds for coring harder materials.
  • BUILT FOR THE PROFESSIONAL – This is the ideal core bit for Construction workers, carpenters contractors, serious DIYers, and tradesmen.
  • EQUIPMENT – Designed to be used with a core drill rig.
Check Stock

To Paint or Not to Paint

  • Durable, 2-part epoxy formula works on interior concrete surfaces, such as garage floors, workshops, basements and more.
  • Professional glossy finish is easy to clean and provides a long lasting protection that is 5X harder than 1-part epoxy floor paint.
  • Walk on ready in 24 hours, vehicle and drive-on ready in 3 days.
  • Superior adhesion coating ensures no hot tire pickup and protects against gasoline, antifreeze, motor oil, and salt.
  • Low odor, low VOC gloss finish provides a show room shine.
Check Stock

tonchean Rotary Hammer Drill Bits Set 17 PCS SDS Plus 40Cr Carbon Steel Concrete Masonry Chisel Set with Storage Carrying Case - 4 Flutes Drill Bit Carbide Tipped for Brick, Stone and Concrete

  • 【High Quality Carbide Material】The concrete drill bits are tipped with durable YG8C tungsten carbide and with 40Cr carbon steel body. They are harder, tougher and more resistant and durable to extreme loads for longer tool life and faster performance in masonry.
  • 【Universal Connection Design】Enhanced 4 flute design reduces stress and helps the bit run cooler, and for fast dust removal..
  • 【Multifunctional Using】The SDS - PLUS shank is suitable for most rotary hammer drill. The bit set includes 13pcs drill bits with 5.5 mm, 6 mm, 6.5 mm, 7 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm , 1 point chisel, 2 flat chisel and 1 U-groove chisel..
  • 【Easy To Use】The 17Pcs hammer drill sds bits can be exchanged easy and quickly, according to different work require..
  • 【Widely Application】4pcs chisels included, those are constructed of rugged 40Cr carbon steel, for cutting concrete, asphalt or masonry and bull point chisel for heavy duty concrete breaking..
Check Stock

Rust-Oleum 261845 EpoxyShield Garage Floor Coating , 2 gal, Gray

  • Durable, 2-part epoxy formula works on interior concrete surfaces, such as garage floors, workshops, basements and more.
  • Professional glossy finish is easy to clean and provides a long lasting protection that is 5X harder than 1-part epoxy floor paint.
  • Walk on ready in 24 hours, vehicle and drive-on ready in 3 days.
  • Superior adhesion coating ensures no hot tire pickup and protects against gasoline, antifreeze, motor oil, and salt.
  • Low odor, low VOC gloss finish provides a show room shine.
Check Stock

KELLEY TECHNICAL COATING Olympic Poxolon Epoxy Pool Paint, 1 Gallon, White

  • Durable, 2-part epoxy formula works on interior concrete surfaces, such as garage floors, workshops, basements and more.
  • Professional glossy finish is easy to clean and provides a long lasting protection that is 5X harder than 1-part epoxy floor paint.
  • Walk on ready in 24 hours, vehicle and drive-on ready in 3 days.
  • Superior adhesion coating ensures no hot tire pickup and protects against gasoline, antifreeze, motor oil, and salt.
  • Low odor, low VOC gloss finish provides a show room shine.
Check Stock

Rust-Oleum 251965 EPOXYSHIELD Garage Floor Coating 1 Car Kit Gray

  • Durable, 2-part epoxy formula works on interior concrete surfaces, such as garage floors, workshops, basements and more.
  • Professional glossy finish is easy to clean and provides a long lasting protection that is 5X harder than 1-part epoxy floor paint.
  • Walk on ready in 24 hours, vehicle and drive-on ready in 3 days.
  • Superior adhesion coating ensures no hot tire pickup and protects against gasoline, antifreeze, motor oil, and salt.
  • Low odor, low VOC gloss finish provides a show room shine.
Check Stock

Rust-Oleum 261846 EPOXYSHIELD Garage Floor Coating, 2.5 Car Kit, Tan

  • Durable, 2-part epoxy formula works on interior concrete surfaces, such as garage floors, workshops, basements and more.
  • Professional glossy finish is easy to clean and provides a long lasting protection that is 5X harder than 1-part epoxy floor paint.
  • Walk on ready in 24 hours, vehicle and drive-on ready in 3 days.
  • Superior adhesion coating ensures no hot tire pickup and protects against gasoline, antifreeze, motor oil, and salt.
  • Low odor, low VOC gloss finish provides a show room shine.
Check Stock

COMOWARE Rotary Hammer Drill Bits Set & Chisels- SDS PLUS Concrete Masonry Hole Tool 17pcs with Storage Case

  • PROFESSIONAL AND WIDELY USE: Compared with percussion drills, electric hammer drills can generate stronger impact force lightly, allowing for effective and precise drilling. Before using the hammer drill, you can use a chisel to make a point of strength, and then combine the hammer drill to meet your processing needs..
  • HIGH QUALITY CARBIDE MATERIAL: It is featured in a harder YG8 Carbide tip and carbide steel body. The robust head is ideal for high impact applications. It allows for precise starts in materials such as reinforced concrete..
  • UNIVERSAL CONNECTION DESIGH: The SDS – PLUS shank is suitable for most rotary hammer drills on the market and meets most of your needs. SDS chisel matches the electric hammer drill to punch hole for concrete, brick and wall, cut and chisel groove..
  • MULTIFUNCTIONAL USING: The bit set includes 13pcs drill bits with 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 9/16″, 5/8″, 1 Point Chisel, 2 Flat Chisel and 1 U-groove Chisel..
  • CONVENIENT ORGANIZATION AND STORAGE: Come with a plastic index case, convenient to use and carry..
Check Stock

CS Unitec Electric Paint Stripper -Paint Stripper Wood Kit for Decks, Siding, & More-EOF 100 Carbide Paint Remover Machine Removes: Dry Paint, Varnish, Latex, & More-Wood Disc Included-Made In Germany

  • The EOF 100 Electric Paint Scraper Is Up to 5x Faster Than Traditional Power Sanders with Less Vibration, Soft Start, and Ergonomic Handles for Increased Operator Comfort..
  • This Light-weight , Heavy-Duty Professional Planer Removes Varnish, Paint, Graffiti, Latex, Resins, Coatings, Solids, Greasy Dirt, Sprays & More..
  • Tool For Use On Wood, Concrete, Metal, Aircraft, Boats, Decks, Siding, Walls & more. Low Clearance - Mill Right To The Edge..
  • Dust Extaction Port For Reducing Exposure to Unhealthy Odors and Hazardous Chemicals (When Used With Dust Extraction Vacuum)..
  • Milling Head Diameter 4", Depth Adjustment 0.1 mm to 1.0 mm, 7lbs, Replaceable Carbide Milling Discs For Use On Wood/Softer Materials Included(P/N 37124000) Disc For Concrete/Harder Material Also Available(P/N 37125000)..
Check Stock

ICS 531739 Proforce-Premium S 12-Inch Diamond Chain Fits 695F4 Gas Powered Saw

  • ProFORCE-25 Premium L Chains cut 10 Inches on Hydraulic Saws.
  • ProFORCE-25 Premium L Chains cut 12 Inches on Large Gas Saws.
  • Longer Life for harder concrete with rebar.
  • Every other link in an ICS ProFORCE Premium S Chain is a Diamond Segment.
  • The Segment Count can help you identify the chain.
  • Deep engagement drivelinks help keep cuts straight.
  • Water distribution feature allows for better lubrication between bar and chain.
  • Patent pending pitch design creates the optimal combination of weight and strength.
Check Stock

Utoolmart Masonry Drill Bit 10mm x 150mm Carbide Tipped Rotary Hammer Bit 9mm Round Shank for SDS Impact Drill 1Pcs

  • 【Dimension】- Cutting diameter: 10mm / 0.39-inch.
  • 【Carbide Tip】- Carbide-tipped drill bit head is harder and tougher to extreme loads. 4-flute design for fast dust removal..
  • 【Flute Design】- Optimized flute design to reduce bit stress and make the bit run cooler for long life..
  • 【Centric Tip】- Centric tip for optimal hole geometry and provides rounder holes. For use in drill requiring Special Direct System shank..
  • 【Wide Use】- Designed for fast drilling in concrete, masonry, artificial stone, and rock.
Check Stock