Arctic Air AGF24 24-Inch 3-Shelf Glass Froster with Sliding Lid, Black, 1/5-HP, 115v

  • Electronic thermostat with digital LED display for accurate control located behind front access panel..
  • Exterior cabinet construction consists of black powder coated steel front and sides..
  • Self-contained capillary tube system using R290 Hydrocarbon gas..
  • Easy to mount 3. 50” casters (two lockable) are standard with all units..
  • Front accessible condensing unit for easy cleaning and maintenance..
Check Stock

POPMOON Stainless Steel Mounting Bracket for 9000-36000BTU Condenser Ductless Mini Split Air Conditioner Heat Pump Systems.

  • High Quality -made of solid thick stainless steel material for longer service life..
  • Accurate Construction - advanced technics to ensure brackets are perpendicular to each other when condenser leveling.
  • Universal Design - Adjustable for use with up to 9,000 - 36,000 BTU Units not exceeding a maximum weight capacity of 360 lbs. It includes hardware and expansion bolts for wall mounting..
  • Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.
  • Breezy Installation & Versatility - assemble easy enough, all necessary hardware included, bracket serews and expansion screws.
Check Stock

2 Pari Mounting Bracket for 9000-30000BTU Condenser Ductless Mini Split Air Conditioner Heat Pump Systems, Rust Free Stainless Steel

  • High Quality -2 sets brackets(4 brackets) made of solid thick stainless steel material for longer service life..
  • Accurate Construction - advanced technics to ensure brackets are perpendicular to each other when condenser leveling.
  • Universal Design - Adjustable for use with up to 9,000 - 30,000 BTU Units not exceeding a maximum weight capacity of 360 lbs. It includes hardware and expansion bolts for wall mounting.
  • Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.
  • Breezy Installation & Versatility - assemble easy enough, all necessary hardware included, bracket serews and expansion screws.
Check Stock

Mounting Bracket for 9000-36000BTU Condenser Ductless Mini Split Air Conditioner Heat Pump Systems, Support Condenser up to 450 lbs, Rust Free Stainless Steel

  • High Quality -made of solid thick stainless steel material for longer service life..
  • Accurate Construction - advanced technics to ensure brackets are perpendicular to each other when condenser leveling.
  • Universal Design - Adjustable for use with up to 9,000 - 36,000 BTU Units not exceeding a maximum weight capacity of 450 lbs. It includes hardware and expansion bolts for wall mounting.
  • Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.
  • Breezy Installation & Versatility - assemble easy enough, all necessary hardware included, bracket serews and expansion screws.
Check Stock

ZHOUWHJJ Mounting Bracket for 9000-30000BTU Condenser Ductless Mini Split Air Conditioner Heat Pump Systems Support Condenser up to 360 lbs Rust Free Stainless Steel Type1

  • High Quality -made of solid thick stainless steel material for longer service life..
  • Accurate Construction - advanced technics to ensure brackets are perpendicular to each other when condenser leveling.
  • Universal Design - Adjustable for use with up to 9,000 - 30,000 BTU Units not exceeding a maximum weight capacity of 360 lbs. It includes hardware and....
  • Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.
  • Breezy Installation & Versatility - assemble easy enough, all necessary hardware included, bracket serews and expansion screws.
Check Stock

ICOOL Outdoor Wall Mounting Bracket for 9000-36000 BTU Universal Mini Split Ductless Air Conditioner Heat Pumps Compressors & HVAC Systems Heavy Duty Foldable Wall Mount Condenser Bracket

  • Adjustable for use with up to 9,000 - 36,000 BTU units (universal mini split, ductless air conditioner, heat pumps, AC compressors & HVAC systems),....
  • Exclusive built-in spirit level can correct mounting slope position. Triangle stiffeners design enhance the structure for long term stability..
  • The bracket features one cross bar and two L-shaped brackets (foldable). Each arm of foldable brackets has two upgraded metal bolts with lock nuts..
  • Please raise the condensing unit above ground level for multi-floor mounting, protection from dirt, snow, debris, floods, vandalism, etc..
  • Breezy installation and versatility, and all necessary hardware included (If any accessories missing when you receive the bracket, although it is a....
Check Stock

SANIFLO Sanineutral - Neutralizes Acidic Condensate - Residential & Commercial

  • HEALTHY PH = HEALTHY PLUMBING: The Sanineutral is a system that neutralizes acidic condensate from condensing boilers, HVAC systems, water heater systems, etc. The Sanineutral works without a pump or it can be placed before the Sanicondens or Sanicondens Best..
  • NEUTRALIZER NEEDED?: Typical condensate from a condensing boiler has a pH level of 3.2 to 4.5, which is acidic enough to leave stains, kill shrubs, and eat away cast iron drainage systems. It is important to keep these systems in mind..
  • CUT THE CRUD: Sanineutral discharges condensate from a condensing boiler or other condensate producing fixtures. The condensate will drain into the system via a side inlet that can be adapted to one of several diameters..
  • TECHNICAL SPECIFICATIONS: Operating Temperature: 160°F Max..
  • Connection diameter (inch) 1/2” or 3/4” PVC slip or barbed.
  • 3 YEAR WARRANTY: All of Saniflo's products have a 2 year warranty with purchase, and an extended year with registration. Our warrant....
Check Stock

Noritz NC-1

  • Designed to neutralize all acidic condensate produced by condensing water heater models.
Check Stock

Gardunlux Expandable Privacy Fence Screen Artificial Ivy Leaf Decorative Faux Leaves Panel Fencing Hedge Lattice for Outdoor Garden Railing Balcony Patio Ceiling (Yellow Perilla Leaf)

  • This decorative expandable fence is made of real natural willow frame with lifelike artificial faux ivy leaves. The leaves is made from high quality UV stabilized polyethylene material which is sunlight & water resistant that..
  • Measurement: 16 x 48 inches when fully closed, can be expanded to 118 inches in width. If you need, you can free transform it from 40cm-300cm in width, design your privacy place in different style..
  • Easy installation: 12pcs cable ties are included in the package for easy setup, using them or other ties to fixed the hedge on the wall, door, balcony or other scene. To supply natural privacy fence screen experience..
  • Great design for outdoor & indoor use or home decoration like wedding, party, holiday design. Also you can decorative the outdoor air condensing units, distribution box,etc..
  • Easy clean with just water, very minimum maintenance.Only need a few minutes to install by cable ties or zip ties. Clean by water flushing,all is super simple..
Check Stock

AlphaWorks Tire Pressure Gauge LCD Display Inflator Wall Mountable Automatic 110-240VAC + AC102 Brass 1/4 Inch NPT Air Chuck + 30’ Foot Hose with TMPS of: Bar Psi Kpa Kgf for All Vehicle Tires

  • UNIT, CHUCK & HOSE SPECS - Accuracy: ±0.02bar / ±0.3psi. Inlet/Outlet: 1/4" Male NPT / 1/4" Female NPT. Max Inlet Air Supply Pressure: 10. 5 bar, 152 psi, 1050 kpa, 10.5 kg. Scale/Inflation Range: 0.2-12 bar / 3-175 psi / 20-1206 kpa / 0.2-12. 3 kg/cm². A Relative Humidity of: up to 95% RH (non-condensing). Blue Polyurethane Pneumatic Spiral 30' (9m) Long Hose W.P. 300 psi / 20 bar (B.P. 60 bar) / Quick Connect Male Fitting (Can inflate accurately with hoses up to 164' (50m)..
  • ELITE QUALITY DESIGN - Modern aesthetic look, lightweight, shock resistant construction & vandal resistant switches for long life. Large easy to read LCD display & back-light. Suitable working temperatures of: 14°F-122°F (-10°C-50°C). This unit runs on a Power Supply voltage & Max Wattage of: AC 110-240V (50-60Hz) @ 10W MAX & will give audible & visual warnings, for pressure rating. MOUNTING ACCESSORIES: Hook including x1 M6*38 screw kit, Wall Mounting Bracket including x4 M4. 8*38 screws..
  • ADVANCED CAPABILITIES - Comprehensive diagnostics & error reporting, w/ a Touch ABS case for precision measuring in all vehicle types. Highly Accurate readings of tire pressure in TMPS Units of Measure: bar, psi, kpa, kgf. (Individually calibrated & tested, under direc....
Check Stock

Noritz SV-CK-3 3' SV Conversion Kit (required for DV to SV conversion)

  • Converts condensing (DV) direct vent models to atmospheric design for EZ98 and 111DV models..
  • Built-in bird/bug screen to protect blower motor.
  • Converts condensing (DV) direct vent models to atmospheric design. Will consume make up air from available environment such as vented attic space..
  • Builtin bird/bug screen to protect blower motor.
  • PVC glue on install for ease of installation.
Check Stock

Tripod Clamp Mount, Lab Stand Holder Cross Clip, for Experiment Laboratory

  • ADJUSTABLE TONG OPENING: Because of flexible tong opening, the condensing tube clamp can be used in different specifications of the lab instrument..
  • STRONG CLAMPING FORCE: The four-claw lab clamp features strong clamping force, which makes sure that the experiment supplies held by the clamp will not fall..
  • FLEXIBLE HANDLE: The handle can rotate 360 degree, which allows for pouring the chemical solutions easily..
  • FOUR CLAW DESIGN: The beaker clamp adopts four-claw design, which improves its clamping force..
  • APPLICATION: The condensing tube clamp is suitable for clamping various lab supplies such as condenser pipe, flask, etc..
Check Stock

The Amazing Ohaus V41XWE6T Valor 4000 Legal For Trade Food Scale-6 kg/15 lb

  • ...tion Stainless steel housing, stainless steel platform Weighing Units kg, g, lb, oz, lb:oz.
  • Power 100-240 VAC / 50-60 Hz internal universal power supply, internal rechargeable lead acid battery Battery Life 50 hours continuous use Calibration External Operating Temperature Range -10° C to 40° C, 10% to 95% RH, non-condensing Ingress Protection IPX8 Pan Size (W x L) 7.5 x 9.5 in / 190 x 242 mm Scale Dimensions (W x L x H) 11.4 x 10.1 x 4.9 in / 288 x 256 x 124mm Shipping Dimensions (W x L x H) 16 x 15 x 9 / 410 x 370 x 220mm Net Weight 8.6 lb x 3.9kg Shipping Weight 11 lb x 4.9kg.
  • Brand new with 1 year manufacturer warranty.
Check Stock