Categories

Best Conductivity Adhesive Tape

Copper Foil Tape (1inch X 66 FT) with Conductive Adhesive for Guitar and EMI Shielding, Slug Repellent, Crafts, Electrical Repairs, Grounding

  • ADEQUATE COPPER FOIL TAPE – Each roll is 25mm x 20m.
  • Wide copper foil tape can wrap the cable, machine component, connection, fan, extendable antenna, computer component fully..
  • ADHESIVE TAPE WITH GOOD FLEXIBILITY – The dual conductive tape can be twisted, bent, tore easily, enable you to use them by hand, no need to apply with other tool, one fit most of cables..
  • EMI SHIELDING COPPER FOIL TAPE – The copper tape can EMI shielding in electric machine to protect your electronics devices from electromagnetic interference. Moisture resistance, chemical and corrosion resistance, good for outdoor application..
  • SLUG REPELLENT TAPE FOR PLANTS – You can wrap copper tape around the base of small plants and seedlings to avert the slugs keeping eating small plants and seedlings. Copper conductive adhesive tape can be applied to stained glass, paper circuits, electrical repairs, soldering, grounding..
  • DUAL CONDUCTIVITY – The conductive copper foil tape has dual conductivity so current will flow through both sides and the adhesive. No need to worry that the adhesive tape will reduce the effectiveness between components..
Check Stock

CCHUIXI Copper foil Tape for Stained Glass, 1/2 ”x 66FT x 4Rolls, Double-Sided Conductive Tape to Guitar & EMI Shielding, Crafts, Electrical Repairs

  • Conductive adhesive:This allows any overlapping seams of tape to be electrically continuous, and the need for soldering..
  • Shielding copper foiltape: The copper tape can EMI shielding in electric machine to protect your electronics devices from electromagnetic interference..
  • Dual conductivity :The conductive copper foil tape has dual conductivity so current will flow through both sides and the adhesive. No need to worry that the adhesive tape will the effectiveness between components..
  • Tape for plants:You can wrap copper tape around the base of small plants and seedlings to protect plants..
  • Size:1/2"x 66 feet x 4 rolls. If you are not satisfied, we will refund 100% of your purchase..
Check Stock

Smalloo 1.2'×80ft Double Side Adhesive Thermal Conductive Cooling Tape for Heatsinks, LED Lights, IC Chip, Computer CPU, GPU, Raspberry pi, Modules

  • The 1.2"×80ft(wideth×length) double side adhesive thermal conductive tape for heatsink, like heatsink for LED, IGBT, IC Chip, Computer CPU, GPU, Modules, Raspberry pi, Electrically Insulated..
  • The thermal conductive cooling tape thermal conductivity: glass fiber thickness 0.2mm, 1.5 W/m-k. Long term heat resistant 120°C, short term heat resistant 180°C.
  • The thermal adhesive with the features of high thermal conductivity, insulation, strong stickiness, softness, compression..
  • The thermal adhesive tape is simple and practical , Combined with thermal paste, the effect will be better and very easy to use..
  • Double-sided thermal adhesive tape at low cost solve the problem of heat dissipation, it is great helper to solve heat dissipation for many electronics products..
Check Stock

3M 1245 Embossed Copper Foil Tape - 2in. x 54ft. Pressure-Sensitive Acrylic Adhesive Roll for Grounding, EMI Shielding

  • Conductive Foil Tape: the copper foil tape is an industrial grade electrically conductive metal foil tape that facilitates soldering and resists oxidation and discoloration. The tape works well for cable wrapping, wrapping heavy motor.
  • Function: the flame-retardant tape has dead soft copper foil backing and is pressure sensitive. The embossed pattern cuts through the adhesive layer to establish a reliable contact between the copper backing and substrate.
  • Application: the embossed copper foil tape is typically used for grounding, RFI/EMI shielding and static charge draining applications requiring good electrical conductivity.
  • Features: the acrylic adhesive tape is flame retardant and has great grounding and conductivity. It offers low contact resistance between substrate and copper backing–making it easy to remove dangerous build-up on CRTs and computer peripherals.
  • Specifications: the 0.0083in. thick electrical tape is 2in. wide and 54ft. long.
Check Stock

Meideal Copper Foil Tape (4" X 118") with Dual Conductive Copper Adhesive Tape for Guitar & EMI Shielding, Electrical Repairs, Crafts, Stained Glass, Paper Circuits, Soldering, Grounding, Garden

  • ...ductive adhesive tape is made of premium pure copper foil--high conductive, low resistance, sturdy and durable, anti-rust, anti-corrosion, waterproof and resistant to high and low temperature. With a strong adhesive, it can firmly sticks to almost any clean surface..
  • [DUAL CONDUCTIVITY]: Conductive adhesive copper foil tape has dual conductivity so current will flow through both sides and the adhesive, making it easy to electrical repairs, paper circuits, soldering, grounding, etc. No need to worry that the adhesive copper tape will reduce the effectiveness between components..
  • [DESIGNED FOR GUITARISTS]: Copper foil tape can effectively reduce annoying electrical interference and eliminate the buzz and noise, making your guitar tone perfect. So whether you're a beginner or professional, copper shielding tape applied to your guitar can improve your guitar sound quickly..
  • [GREAT FOR CRAFTS AND STAINED GLASS]: Dual conductive copper tape can be twisted, bent and tore, making it easy to shape and mould. With its fantastic pure copper color, it is a fun way to create stained glass pieces, holiday cards, gifts and other DIY ....
Check Stock

EDSRDRUS Thermal Adhesive Tape 0.4 Inches x 82 Feet High Performance Thermally Conductive Tape, High Durability, Apply for Heat Sink, LED Strips, Computer CPU, GPU,etc

  • Widely Used: From the hardware to the printing industry, EDSRDRUS thermal conduction tape has many applications. It’s perfect for electronic appliances, digital products, mobile phones, radiators, high-power electronic components, circuit board heat dissipation, computer CPU, GPU, and more..
  • Material: EDSRDRUS double-sided thermally conductive tape combines fiberglass and acrylic adhesive with conductive ceramic powder for high thermal conductivity and insulating properties. Coated with strong acrylic adhesive, it’s removable, repositionable, and leaves no residue. It’s easy to install, efficient, and perfect for electronic devices..
  • High Stability: With high and stable thermal conductivity, EDSRDRUS thermal tape lasts longer than standard heat-dissipating double-sided tape. It operates at temperatures of 80-120℃ (176-248°F) for at least 60 months..
  • Excellent Stickiness: Our exceptional adhesive bonds securely to a variety of surfaces. For optimal adhesion, the surface must be clean, dry, and flat..
  • Precautions for Use: Before use, please clean the surface of dust. Then cut, apply, and press the tape down as needed. Manually remove the backing liner. To keep the adhesive layer secure, avoid leaving fingerprints on it..
Check Stock

TAPEGO Aluminum Tape Reflective Duct Tape Heavy-Duty HVAC Aluminum Foil Tape for Sealing,Patching Hot,Cold Air Ducts, Metal Repair,4 Mil,2 inch x 66ft

  • · High-quality aluminum foil tape coated in epoxy resin with strong, cold-weather solvent acrylic adhesive set on a easy-release silicone paper liner to preserve the adhesive..
  • · This aluminum foil tape provides excellent bond on metals, plastics, copper, ceramic and concrete. Conformable and pressure sensitive adhesive enables it to fit on corrugated joints and irregular corners..
  • · Excellent thermal conductivity that allows it to be used as an insulation tape, cooling pad and heat sink. Thermal conductivity helps cooling and heating efficiency, improving efficiency in systems..
  • · Ideal for an array of uses, including HVAC ductwork maintenance, patching, seaming and sealing, duct insulation systems, sealing aluminum, stainless and plastic seams / joints, temporary repair of metal surfaces, copper pipe fixing, etc..
  • · Can be used in most weather conditions and at a wide variety of temperatures.Ensure that surface is clean, dry, free of grease, oil or other contaminants before applying aluminum tape..
Check Stock

Thermal Pad,100 x 100 x 2.5mm Thermal Conductivity 12.8W/m.k,High Performance Thermal Conductive Silicone Pads for Laptop Heatsink SSD CPU GPU LED IC Chipset Cooling-White

  • ❀ Thermal Adhesive Tape is a simple and practical tape, easy to install, easy to use, easy to eliminate..
  • ❀ Thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression..
  • ❀ EFFICIENT THERMAL CONDUCTIVITY - The Thermal Pad based on silicone & a special filler outperforms generic and performance pads by far. The Thermal Conductivity amounts to 3.0 W/mK..
  • ❀ Thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression. ✔Widely used in most electronic devices,High tensile strength and strong adhesion hold the device firmly in place, to achieve the most effective thermal dissipation.
  • ❀ Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding..
Check Stock

Thermal Adhesive Tape, 25m x 10mm x 0.20mm Double Side Thermal Tapes Cooling Heatsink Pad Apply to LED, IGBT IC Chip Computer CPU GPU Modules MOS Tube SSD Drives

  • ❀ Thermal Adhesive Tape is a simple and practical tape, easy to install, easy to use, easy to eliminate..
  • ❀ Thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression..
  • ❀ EFFICIENT THERMAL CONDUCTIVITY - The Thermal Pad based on silicone & a special filler outperforms generic and performance pads by far. The Thermal Conductivity amounts to 2.0 W/mK..
  • ❀ Thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression. ✔Widely used in most electronic devices,High tensile strength and strong adhesion hold the device firmly in place, to achieve the most effective thermal dissipation.
  • ❀ Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding..
Check Stock

Thermal Adhesive Tape, 25Mx20mmx0.25mm High Performance Thermally Double Side Tapes Cooling Pad Apply To LED Strips, 3D Printer,BCP,CPU,GPU,Laptop Heatsink,And have heat conduction, insulation,

  • ✔Aikenuo thermal adhesive Tape is a simple and practical tape, easy to install, easy to use, easy to eliminate..
  • ✔Aikenuo thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression..
  • ✔ Widely used in most electronic devices,High tensile strength and strong adhesion hold the device firmly in place, to achieve the most effective thermal dissipation..
  • ✔Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding..
  • ✔Thermal double-sided tape has a thermal conductivity of only 1.5 W/mk, Can't provide good cooling results, If you need high thermal conductivity products, Please search (B075JDW2RB), This is our highest thermal conductivity product, Its thermal conductivity is 6.0 W/mk, It is the highest specification thermal pad on the market, but it is not very sticky, You can use these two different items together.Our products also include Silver Thermal Compound Grease Paste..
Check Stock

Thermal Adhesive Tape Double Side Thermal Conductive Tape for Heatsink LED IGBT IC Chip Computer CPU GPU Modules Electrically Insulated 10mm x 25M x 0.2mm

  • GOOD ADHESION - This heatsink tape has strong adhesion which makes cooling random objects so much easier as it combines the heat sinks and electronic....
  • HIGH THERMAL CONDUCTIVITY----The thermal tape made of acrylic polymer which filled with heat conductive ceramic powder and silicone adhesive compound....
  • WIDELY APPLICATION----The double side thermal tape featuring electrically insulated , thermally conductivity and strong adhesion is ideal for....
  • MEET ROHS & UL THE ENVIORMENT ----The heatsink tape has high thermal conductivity 1.5 W/m-k to meet most of electronics heat dissipation demands. The....
  • EASY TO USE----Stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices....
Check Stock

Thermal Adhesive Tape 20mm by 25M, HPFIX High Performance Thermally Conductive Tape Apply for Coolers, Heat Sink, LED Strips, Computer CPU, GPU, Easy to Apply & High Durability

  • ???? HPFIX thermal adhesive Tape is a simple and practical heat conductive tape, very easy to use, even for beginners..
  • ???? Thermally conductive tape has very strong adhesion and has good thermal conductivity. It is often used on heat sinks- efficiently transfer heat dissipation for electronics. If combined with thermal paste, the effect will be better..
  • ???? HPFIX thermal tape has thermal conductivity 1.5 W/m-k to meet most of electronics heat dissipation demands..
  • ???? Thermal tape is widely used for high power LED,High power power supply, Computer CUP, GPU, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip,Video Card RAM, DDR Memory Modules, SSD drives, new energy heating power..
  • ???? Themral tape heat conductivity is high and stable, its life is longer than the general heat-dissipating double-sided sticker, and it can work for at least 5 years at normal temperature (80-120°C )..
Check Stock

Copper Foil Tape with Double Sided Conductive Adhesive for Guitar Repairs, EMI Shielding, Soldering Repairs, Crafts, Electrical Repairs, Grounding(1 Inch X 66 Feet)

  • DUAL SIDED CONDUCTIVITY - This conductive copper foil tape has double sided adhesive, so no need to worry that the adhesive tape will reduce the effectiveness between components..
  • COPPER FOIL TAPE SIZE - Each roll is 25mm x 20m (1 inch x 66 feet).
  • Wide copper foil tape can wrap the cable, machine component, connection, fan, computer component fully.
  • DURABLE MATERIAL - Made by using a copper foil with double sided conductive acrylic adhesive designed to help with various applications, such as crafts, electronics, grounding, and gardening..
  • MULTI-PURPOSE - Used in aerospace assembly, EMI shielding, cable shielding, RFI shielding, guitar repair, electronic assembly, semiconductor facilities, paper circuits,etc.
  • ADHESIVE WITH FLEXIBILITY - The dual copper foil conductive tape is made of high quality copper, with excellent flexibility which can be twisted, bent, tore easily to fit any item shapes and resistant to heat.
Check Stock