Reliance Controls 306CRK Pro/Tran-2 6 Circuit Transfer Switch Kit
- Transfer switch made for reliably-fast installation in both residential and commercial applications.
- Designed specifically for generators up to 7,500 maximum running watts.
- 18-inch flexible conduit whip attaches easily to the load center.
- Maximum single-pole circuits: 10 / Maximum double-pole circuits: 5.
- Features a rugged, powder-coated steel cabinet. six combination knockouts and more.
Check StockWestinghouse Lighting 0107000 Saf-T-Grid for Suspended Ceilings
- Saf-T-Box allows safe, simple installation of fans and fixtures, ideal for new construction and where attic is accessible.
- Supports ceiling fans up to 70 pounds or lighting fixtures up to 150 pounds.
- Includes three knockouts for Conduit or Romex, one Romex clamp.
- 21.5-cubic-inch wiring capacity, electrical box is 2-1/8 inches deep.
- Includes Saf-T-Cap, mounting hardware and instructions.
Check StockBELL PRB57550WH EMW3207396, 4.25 in, White
- Support box allows for safe installation of a ceiling fan or light fixture.
- 1/2-Inch-deep box with 6-cubic-Inch capacity.
- UL listed for lighting fixture support of 150 pounds or less, acceptable for fan support of 70 pounds or less.
- Bulk-packed mounting pan. Includes Saf-T-Cap to protect inner workings during drywall installation or painting.
Check StockWestinghouse Lighting 0103611 Saf-T-Pan, 1/2-Inch Deep, Red
- Support box allows for safe installation of a ceiling fan or light fixture.
- 1/2-Inch-deep box with 6-cubic-Inch capacity.
- UL listed for lighting fixture support of 150 pounds or less, acceptable for fan support of 70 pounds or less.
- Bulk-packed mounting pan. Includes Saf-T-Cap to protect inner workings during drywall installation or painting.
Check StockReliance Controls 31410CRK Pro/Tran 10-Circuit 30 Amp Generator Transfer Switch Kit,Gray
- Convenient transfer switch kit, ideal for your circuitry and multi-wiring needs, is also made for reliably-fast installation in both residential and commercial applications.
- Designed specifically for generators up to 7,500 maximum running watts.
- 18-inch flexible conduit whip attaches easily to the load center.
- Maximum single-pole circuits: 10 / Maximum double-pole circuits: 5.
- Features a rugged, powder-coated steel cabinet. six combination knockouts and more.
Check StockReliance Controls Corporation 20216A Pro/Tran 6-Circuit Indoor Transfer Switch for Generators Up to 5,000 Running Watts
- Designed for fast installation in both residential and commerical applications.
- 18-inch flexible conduit whip easily attaches to load center.
- Maximum single-pole circuits: 6, Maximum double-pole circuits: 1.
- Features rugged powder-coated steel cabinet, six combination knockouts, resettable branch rated circuit breakers and non-defeatable double-throw switches. MAX. COMBINED LOAD @ 125 VAC : 40.
Check StockWestinghouse Lighting 0110000 Saf-T-Brace for Ceiling Fans 3 Teeth Twist and Lock,Silver Pack of 1
- Saf-T-Brace allows safe, secure installation of fans and light fixtures, ideal for new construction or remodel.
- Supports light fixtures up to 150 pounds on 16-inch centers, fixtures up to 50 pounds on 24-inch centers and fans up to 70 pounds.
- Dual-mount electrical box has 15.5 cubic inches wiring capacity.
- 1-1/2 inches deep, 6 knockouts for conduit or Romex.
- Includes brace, electrical box, Saf-T-Cap, one Romex connector, mounting hardware and instructions.
Check StockSealproof Fan Brace - Electrical Box and Support Bar for Ceiling Fans and Light Fixtures, New Installations and Remodels
- The Sealproof Bar Hanger Mount Box provides simple and safe installation of a ceiling fan or light fixture with secure attachment to a ceiling joist. Can be used with engineered truss..
- Attic access ideal - mounting bracket for use in new constructions or remodels. Fits all ceiling fans. Fan support of up to 70 lb..
- Fits 16" to 24" ceiling joists. The mounting bracket can be installed in finished ceilings through a hole large enough to fit the box..
- Fixture Support for 16" Centers is 150 lbs. Fixture Support for 24" Centers is 90 lbs..
- Mount Box Includes 4 Conduit Knockouts. Includes protection cap for use during installation or painting..
Check StockOhLectric OL-43688 Ceiling Fan Blades - Perfect Accessory For Replacing Fan Blade - Not Compatible With All Fans - 52-inch Contractor Plus Series - Set Of 5 - Walnut
- Saf-T-Brace allows safe, secure installation of fans and light fixtures, ideal for new construction or remodel.
- Supports light fixtures up to 150 pounds on 16-inch centers, fixtures up to 50 pounds on 24-inch centers and fans up to 70 pounds.
- Dual-mount electrical box has 15.5 cubic inches wiring capacity.
- 1-1/2 inches deep, 6 knockouts for conduit or Romex.
- Includes brace, electrical box, Saf-T-Cap, one Romex connector, mounting hardware and instructions.
Check Stock
H1499 4 in. Steel Recessed Lighting Housing for Remodel Shallow Ceiling, Low-Voltage, No Insulation Contact, Air-Tite
- Air-Tite rated design meets restricted air flow code requirements which prevents airflow between attic and living areas and saves on both heating and air conditioning costs.
- Has four remodel clips which secure the recessed housing and accommodates 1/2 in. and 5/8 in. ceiling material.
- Compatible with a wide variety of 4 in. low-voltage recessed light trims but is best with Halo 1496, 1493, 1421, 1420 and 1419 series models.
- NM cable pryouts and conduit knockouts in junction box.
- Can be installed from below the ceiling in home remodel applications, ideal for those who have limited or no access to their ceiling.
- For use in non-insulated ceilings or insulated ceilings where insulation is kept at least 3 in. from all sides of the recessed light fixture.
- 3 "Quick Connect" connectors eliminate the need for separate wire nuts - simply strip supply wires and push in.
- Listed for damp location when used with dedicated wet rated recessed ceiling lights.
- Features an integral thermal protector to guard against misuse of insulation materials and improper lamping.
Check StockManufacturer Morris Products Codes 17454 Post Base Channel 4 Hole Square – for 1-5/8” Strut – Side Orientation, Galvanized Steel – 6” x 6” Base – Pack of 3
- Material:Conduit hangers are made of zinc-plated iron,durable to use..
- Conduit hanger ensure that the rigid conduit and EMT conduit are securely secured to the mounting surface..
- High-quality and durable conduit hangers with bolt..
- Used to secure and suspend EMT, rigid conduits from overhead supports..
Check Stock
Snowpiercer: The Complete First Season S1 (DVD)
- 【PREMIUM CONDUIT FITTINGS】- Quantity: 5PACK，Size：3/4inch， The Flexible Conduit Connector is Constructed with Resists corrosion PVC to ensure quality and service life..
- 【COMPLETE ACCESSORIES】-3/4-Inch 5PACK Electrical Conduit Connector,Each connector comes with a sealing washer and locknut.
- 【SAFETY AND STURDINESS】-Resists Corrosion, Abrasion, oil, Water, Acid, Metal Shavings, and Rough Environments.
- Outdoor, Sunlight Resistant, Direct Burial,50% Lighter Than Metallic Conduits.
- 【EFFORTLESS LNSTALLATION】-The Liquid-Tight Conduit Connector Fits is fast,NO disassembly is required and only one person can complete you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
- 【WIDE APPLICATION】-O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable,HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
Check Stock
PRUSTE Generator Inlet Box Featuring: Easy-to-Use Knockouts! (Patent Pending), 30 Amp Generator Inlet Box, NEMA L5-30 Plug, 220v Outlet, 125v Generator Box, ETL Listed, Weatherproof, Outdoor Use
- [PATENT PENDING] Easy-to-Use knockouts! The only Power Inlet Box with removable and replaceable knockouts! Don’t worry about changing your mind regarding the wiring layout. Reinsert the knockout and use another! This is the only inlet box on the market where you can remove a knockout without permanently damaging the box. SOLVES THE #1 COMPLAINT of other boxes on the market: Knockouts are difficult or impossible to actually "KNOCKOUT.".
- [ETL LISTED] Our power inlet box 30a design preserves the ETL listing, thus providing the assurance of quality and safety. Rest easy knowing this 30 amp generator inlet box has met/surpassed exacting safety standards..
- [EXTRA SPACE FOR WIRING] Pruste Power Inlet Boxes are sized to provide additional room for sufficient manipulation of the internal wires. The front provides access to a twist lock plug to accommodate a 30 amp generator cord for extra security..
- [STOP DRILLING KNOCKOUTS!] Other competitors resort to including various drill bits for you to do the work of fixing their poor design, thus making it YOUR problem. Not Pruste. We made it our problem and solved it for good!.
- [VETERAN OWNED AND OPERATED] Purchase your Pruste products with the confidence of being backed with service and integrity. We thank you fo....
Check Stock
