Categories

Best Conduit Mounting Bracket

Mophorn 5HP Electric Compressor Motor, 3450RPM 143T/56 Frame Single Phase 7/8\ Shaft Diameter Air Compressor Motor 208-230V 60Hz AC Electric Motor

  • Powerful Ac Motor: The compact and small-sized electric compressor motor features output 5HP, 143/5T Frame and single phase. Robust and reliable metal material shell protect the inner circuit from thermal overloading..
  • 3450 Rpm High Speed: The compressor duty motor can run at the rated speed 3450 RPM with high working efficiency. Runs with 5HP. Shaft Diameter: 7/8" (2.5 cm), Shaft Length: 2.36" (6 cm)..
  • Fast Heat Dissipation: The air compressor motor has multiple heat dissipation holes so that it has excellent heat dissipation performance. It can prevent foreign objects from being caught in the motor..
  • Manual Overload Protection: The heavy-duty electric motor adopts capacitor housing and conduit boxes to protect all environments, and the low temperature manual overload protector protects against extreme overload..
  • Mounting Bracket Included: Robust mounting bracket in included in the package, used for enlarging the motor's stability and reducing any friction. Ball bearing system is also applied for multiple applications..
Check Stock

Manufacturer Morris Products Codes 17454 Post Base Channel 4 Hole Square – for 1-5/8” Strut – Side Orientation, Galvanized Steel – 6” x 6” Base – Pack of 3

  • Material:Conduit hangers are made of zinc-plated iron,durable to use..
  • Conduit hanger ensure that the rigid conduit and EMT conduit are securely secured to the mounting surface..
  • High-quality and durable conduit hangers with bolt..
  • Used to secure and suspend EMT, rigid conduits from overhead supports..
Check Stock

Carlon CFB-12 Ceiling Fan Box Saddle Round New/Old Work 4-Inch Diameter by 2-3/8-Inch Depth Black

  • Sidemount Plus Fan Box allows safe, simple installation of fans and fixtures, ideal for remodel applications.
  • Supports ceiling fans and lighting fixtures up to 70 pounds.
  • Includes three 1/2-inch Romex or conduit knockouts, two sets of Romex knockouts, one Romex clamp.
  • 21.5-cubic-inch wiring capacity, electrical box is 2-1/8 inches deep.
  • Includes sidemount bracket, electrical box, Saf-T-Cap, mounting hardware and instructions.
Check Stock

Bessey VAS-23+2K Vario Angle Strap Clamp (Pack of 2) (2)

  • 1️⃣[ What You Get ]: 10 x conduit clamps, which fit for 2" / 50mm pipe, screw mounting hole diameter is 0.24" / 6mm, Hole Center Distance 3.6" / 90mm,total length is 3.8" / 96mm.For specific parameters, please refer to the dimension drawing in Figure 4..
  • 6️⃣[ High-quality material ]: The metal u clamp is made of high-standard stainless steel, which is strong and durable, and has the function of corrosion and rust prevention. Even if it is used to fix the pipeline for a long time, it will not be broken and has a long service life..
  • 7️⃣[ Advance Design ]: The steel u clamp adopts a special slot design, which makes it stable and not prone to deformation. The U-shaped double-hole design is stronger than other pipe clamps on the market. The use of superb manufacturing technology makes the surface smooth and free of burrs..
  • 8️⃣[ Multi-purpose ]: The conduit bracket is very practical and can be used for fixing pipes, used for fixing pipes of wood, masonry, stainless steel pipes, plastic pipes, and oil, water and gas media in power hydraulic systems. Used in metallurgy, chemical industry, vehicles, petroleum, chemical industry, shipbuilding and other occasions..
  • 5️⃣[100% Satisfaction Guarantee]: Jersvimc is committed to bringing a pleasant sh....
Check Stock

Wildgame Innovations Outdoor Hunting Power Deer Feeder Battery Charger Edrenaline Solar Panel 6 Volt

  • EDRENALINE SOLAR PANEL - The Wildgame Innovations Edrenaline Solar Panel is a high-efficiency solar battery charger which provides worry-free power to....
  • SILICON SOLAR TECHNOLOGY - The heavy-duty, high-efficiency solar battery charger keeps batteries charged with advanced amorphous silicon solar....
  • EASY TO USE - The Edrenaline Solar Panel easily clips in place to attach to your power control unit and adjusts to the best angle for optimum solar....
  • PREMIUM-QUALITY MATERIALS - Mounting bracket and hardware are made of aluminum which is an excellent conductor of heat and electricity.
  • DURABLE - Protective steel flex-conduit and alligator clips and durable polycarbonate front cover make this Solar panel more long-lasting and....
Check Stock

Signaworks LED 3 Light Steady Andon Tower Light Kit - Parts Only, Assembly Required - 2 Position Switches for On/Off - Stack Light…

  • ...or Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Three 2 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of damage and should last for 10+ years in most applications..
  • ECONOMY SOLUTION - Buying Parts and Putting Together your Andon Signal Light Station Yourself can be a Cost Savings and Provide you with the Exact Signaling Solution you are looking for. If you are looking for....
Check Stock

MaySpare 36 Volt Continuous Duty Solenoid, EZGO Electric Golf Car Relay #70 Series Relay Replaces E-Z-Go Electric Golf Cart 27855G01, 11761G1, 27855G02, 31680G1, 3016

  • Voltage 36 Volt,4 terminal Heavy-duty Solenoid with Copper Contacts,Flat Mounting Bracket/ Apply For Marathon Ezgo TXT Series ,1980-2010 Electric Golf Cart,.
  • Replaces Part #'s: 70-120224, 3016, 11761-G1, 27855-G01, 27855-G02, 31680-G1,Cole Hersee 24080, E-Z-Go 11761GA.
  • Resistance is 18Ω,Max Transient current can be 200A, but Continuous Working Current recommend 80amp/ Dimensions : 2) 5/16-24 Contact Terms/ 2) 10-32 Terminal/ Mounting holes: 5/16 x 19/32, 2-13/64 on centers.
  • Acts as the conduit between the golf car battery and starter generator, Copper alloy contact terminals Insulated base w/ steel housing / MAKE SURE YOUR SMALL DIODE IS IN THE CORRECT DIRECTION WITH THE LINE POINTING TO THE POSITIVE SIDE..
  • WARNING: Only name MaySpare brand authentic !! Brand has been registered in the US..
Check Stock

Signaworks LED 5 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • ...or Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Five 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of damage and should last for 10+ years in most applications..
  • ECONOMY SOLUTION - Buying Parts and Putting Together your Andon Signal Light Station Yourself can be a Cost Savings and Provide you with the Exact Signaling Solution you are looking for. If you are looking for ....
Check Stock

Signaworks LED 3 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • ...or Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, three 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of damage and should last for 10+ years in most applications..
  • ECONOMY SOLUTION - Buying Parts and Putting Together your Andon Signal Light Station Yourself can be a Cost Savings and Provide you with the Exact Signaling Solution you are looking for. If you are looking for....
Check Stock

Signaworks LED 4 Light Steady & Flashing Andon Tower Light Kit - Parts Only Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • ...or Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Four 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of damage and should last for 10+ years in most applications..
  • ECONOMY SOLUTION - Buying Parts and Putting Together your Andon Signal Light Station Yourself can be a Cost Savings and Provide you with the Exact Signaling Solution you are looking for. If you are look....
Check Stock

Klein Tools 93LCLS Laser Level, Self Leveling, Cross Line Level & 935DAG Digital Electronic Level and Angle Gauge, Measures 0 - 90 and 0 - 180 Degree Ranges, Measures and Sets Angles

  • Product 1: Laser Level with self-leveling, easy-to-read horizontal and vertical laser lines with plumb spot lasers to pinpoint overhead locations.
  • Product 1: Level projects horizontal and vertical lines independently or together for various alignments.
  • Product 1: Rugged body provides IP54 water and dust resistance.
  • Product 1: Integrated magnetic 360-degree mounting bracket with 1/4-Inch and 5/8-Inch tripod mounting threads.
  • Product 2: This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level.
  • Product 2: High visibility reverse contrast display improves visibility in dimly lit work environments.
  • Product 2: Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces.
  • Product 2: V-groove edges enable optimal alignment on conduits and pipes for bending and alignment.
Check Stock

M40 1 1/2 Inch Stainless Steel Rigid Pipe Hole Strap,with 2 Holes Cable U Bracket Clamp Hanger，Heavy Duty Rigid Pipe Strap Clamp 30 PCS

  • 【Material】Made of 304 stainless steel. After punching, bending, and integral molding, the reinforcing rib structure is added to improve the....
  • 【Secure Conduit】Ensure that your conduit is safely secure with these 2-hole EMT Pipe Straps that feature reinforced holes and a reinforced rib for....
  • 【Reinforcing Rib Design】The middle part is prominent, larger load bearing, to make pipe strap not easily to deformed during using..
  • 【Application】Pipe clamps use to secure rigid or IMC conduit to wood, masonry, widely used in fixed pipeline such as stainless steel pipes, rubber....
  • 【Easy to Install】 Two Holes u bracket easily secure piping to studs or joists to reduce vibration noise, great improves its safety.
Check Stock

Klein Tools 93LCLS Laser Level, Cross Line Level with Plumb Spot & 935AB4V Level, Torpedo Level is a Magnetic Conduit Level with 4 Vials, V-Groove and Magnet Track, High Viz Orange

  • Product 1: Laser Level with self-leveling, easy-to-read horizontal and vertical laser lines with plumb spot lasers to pinpoint overhead locations.
  • Product 1: Level projects horizontal and vertical lines independently or together for various alignments.
  • Product 1: Water and dust resistant (IP54), hard plastic carrying case included.
  • Product 1: Integrated magnetic 360-degree mounting bracket with 1/4-Inch and 5/8-Inch tripod mounting threads.
  • Product 2: Level with patented magnet track prevents powerful rare earth magnets from falling out.
  • Product 2: Thumb screw attaches level to conduit to measure angle while bending.
  • Product 2: Large, easy-to-read high-visibility vials at 4 angles: level, 90, 45, and 30 degrees.
  • Product 2: Large top-view vial windows enable easy readability from multiple angles.
Check Stock