Best Conduit Npt Thread Bushing

GASHER 5 Pieces Brass Hex Bushing 1 NPT Male x 3/4 NPT Female Brass Threaded Pipe Fitting

Size - 1 INCH Male NPT X 3/4 INCH Female NPT.
Material - Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Temperature range - Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
Function - Hex bushing for connecting two pipes or with different diameters.
Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter.

Hex bushing for connecting two pipes with different diameters..
Size: Standard 3/8 inch NPT male to 1/4 inch NPT female..
Heavy-duty brass construction with rust proof, Easy to connect..
Note: NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter. Please measure and determine the required size before purchasing..
Apply to plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening..

✅ SPECIFICATION - Standard brass pipe fitting 1" NPT male to 3/4" NPT female reducer adapter. For connecting pipes with different ends size..
✅ MATERIAL - This brass reducer bushing adapter is made of high quality brass for corrosion resistance, high temperature ductility and low magnetic....
✅ EASY INSTALLATION - The deep threads design allows the fittings to be better engaged with the object to enhance fixation, and the smooth threads....
✅ OPERATION PRESSURE & TEMPERATURE - Max. Pressure: 150 PSI ,Temperature range：-65 to 250 F..
✅ PLEASE TAKE NOTICE - This pipe fitting can not be installed for potable water use. And, NPT thread size does not actual diameter, it is only....

Hexagonal Bushing for Connecting Pipes of Different Sizes.
Female National Pipe Taper (NPT) Threads on One End and Male NPT Threads on the other for Connecting Different Types of Pipe.
Made from Brass for Higher Corrosion Resistance than Steel.
NPT Thread for Creating Tighter Seals Than Straight Threads.
Certified to Meet NSF/ANSI 61-8 Standard for Quality Assurance.

... The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different diameters. Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or fitting with different diameters Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..

This reducer hex bushing for connecting pipes or fittings with different end types, diameters, or materials..
NPT thread for creating tighter seals than straight threads..
Made of 304 stainless steel, strength and resistance to corrosion..
Temperature range from -30 to +150 degrees F..

All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C.
No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths. Applications: HVAC equipment.
Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
for original equipment manufacturers or field installers. 0 Ring and steel locknut included.

D.O.T Union:1/4"(4 pcs), 3/8"(4 pcs), 1/2"(4 pcs), 5/8"(2 pcs).
D.O.T Tee:1/4"(2 pcs), 3/8"(2 pcs), 1/2"(2 pcs).
Bushing: 3/8" NPT Female x 1/2" NPT Male(2 pcs).
D.O.T Male Elbow:1/4" OD x 1/8" NPT Male(2 pcs), 1/4" OD x 1/4" NPT Male(2 pcs), 3/8" OD x 3/8" NPT Male(2 pcs), 1/2" OD x 3/8" NPT Male(2 pcs).
D.O.T Sraight Male Connector: 1/4" x 1/8" NPT Male(2 pcs), 1/4" x 1/4" NPT Male(2 pcs), 3/8" x 3/8" NPT Male(2 pcs), 1/2" x 3/8" NPT Male(2 pcs).

Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.

Size - 1/4" - 1/8", 3/8" - 1/8" , 3/8" - 1/4", 1/2" - 1/4", 1/2" - 3/8", 3/4" - 1/2".
Material - Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Temperature range - Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
Function - Hex bushing for connecting two pipes or with different diameters.
Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter.

Size & Quantity: 10Pack of NPT 1/2 Liquid Tight Connector..
Material:Liquid Tight Connector are made of high quality nylon,Resistant to salt water,weak acid,alcohol,oil,grease and common solvency..
Features:The claws and seals of excel lent design,can hold cable firmly and have a wider cable range..
Easy to Install:They attach easy to the box and secure tightly to the flex conduit.no diassembly , just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
Widdly Used：Nice tight fit for outdoor electrical box,marine equipment, motors and controls, printing equipment, pumps, refrigeration, transformer connection, outdoor lighting etc..