Categories

Best Conduit Quick Disconnect

Pulse

  • CONDUIT RUNNING: Lightweight and portable, this rodder unit is perfect for running conduit inside and outside conduit drops as well as home drops from the hand-hole box to a building.
  • VERSATILE USE: Used for light pole wiring, control wiring, or walker ducts and rod can be pulled horizontally or vertically.
  • NON-CONDUCTIVE: Made with a non-conductive fiberglass core with a yellow nylon coating for high visibility and flexibility.
  • HIGH TENSILE STRENGTH: Can withstand loads up to 200 kgf (441 lbf) for quick and easy pulling.
  • LIGHTWEIGHT & COMPACT: 22” X 17” X 7” (55.88 cm x 43.18 cm x 17.78 cm) and weighing 14.33 lb (6.5 kg) for easy transportation.
Check Stock

Fish Tape Electrical Wire Threader Wire Puller and Fish Tape Fastener Tool 26 FT(8M) UP Grade Large Leader Hole

  • ⭐Reusable, excellent elasticity, the versatile Wire Puller is applicable for telecom, electrical wire, wall, floor conduit and other wiring installation. The Fish Cable is the perfect tool to assist you in pulling cables through occupied duct.
  • ⭐The Head wheel at the end of the steel wire is 360° available, much easy to across through the bends. And the unique connection method makes it durable and convenient life.you in pulling cables through occupied duct.
  • ⭐Fish tape fastener is used to help fish tape more convenient to use. One side is connected with wire, the red line cap can prevent wire disconnect when pull it. Another side is connected with fish tape, which makes the wire and fish tape connect firmly..
  • ⭐Compare with fiberglass wire, the Fish Tape Puller will not break if you bend too much, compare with steel fish tape, it is flexible. Our PET Fish Tape has strong traction, good flexibility, Anti-aging and high temperature.
  • ⭐The wire can be straightened a little hard you first use it. And the Electrical Wire Threader works great in smaller conduit, but not thicker cables or large pipe.
Check Stock

Upgrade Fish Tape Wire Puller Through Wall Wire Threader Fish plus Fish Cable Fastener with Steel rope 40FT(12M)

  • ⭐【Perfect Flexibility and Rigidity】Unlike fiberglass wire, it will not break if you bend too much, unlike other steel fish tape, it will not curl a lot. Our Plastic-Coated Steel Fish Tape has strong traction, good flexibility, Anti-aging and high temperature..
  • ⭐【Plastic-Coated Steel】With non-conductive plastic-coated construction, the versatile fish cable is applicable for telecom, electrical, wall, floor conduit and other wiring installation. It is the perfect tool to assist you in pulling cables through occupied duct and panel boxes..
  • ⭐【Fish Tape Fastener】Fish tape fastener is used to help fish tape more convenient to use. One side is connected with wire, the red line cap can prevent wire disconnect when pull it. Another side is connected with fish tape, which makes the wire and fish tape connect firmly..
  • ⭐【360°Available Head Wheel】The Head wheel at the end of steel wire is 360° available, much easy to across through the bends. And the unique connection method makes it durable and convenient life..
  • ⭐【Attention】The Fish Cable works great in smaller conduit, but not thicker cables or large pipe..
Check Stock

FERRODAY Stainless Steel Quick Disconnect Set 1/2 NPT Female Disconnect 1/2 Barb Brewing Quick Disconnect For Wort Pumps for Wort Chiller Connectors for Ball Valve Hose Fitting & O-rings

  • 【304 Stainless Steel 】 The FPT quick disconnect is made of top quality 304SS that will last a lifetime. The internal o-ring is food grade....
  • 【Quickly Switch Lines Between Equipment】 1/2 NPT thread quick disconnect can attach to any 1/2 male thread fitting（ball valve, wort chillers,....
  • 【Push-On Hose Fittings 】Firstly you need to pull up the collar on the barbed quick disconnect, then put the Female fitting into the barbed quick....
  • 【No Leaks】The barbed quick disconnect has a red silicone gasket inside. It will create a tight seal for liquid & gas between FPT fitting and the....
  • 【Connection Easily】This quick disconnect set allows one hand operation of take on/ take off. All parts fit together very well . The FPT quick....
Check Stock

Fuel Line Pliers Tweezer Set DEF Exhaust Fluid Lines Disconnect Removal Tools

  • FUNCTIONS: The Oil Cooler Line Quick Disconnect Kit provides 7 different sizes tool to remove/disconnect fittings on fuel lines, heater lines, AC cooling lines and other quick disconnect couplings..
  • FIT FOR VEHICLES: The AC Fuel line disconnect tools are compatible with most Ford, GM, Chrysler and Mazda models. It also fits for some other vehicles while the automatic transmission line is within the sizes..
  • EASY TO USE: The compact size is easy to grasp and the angled design allows to access the hard-to-reach areas. Place the notch against the fuel line to release the lock and remove it..
  • WHAT YOU GET: The Transmission Line Removal Tool set contains 7 kinds of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
  • DURABILITY: All fuel line quick disconnect heater hose disconnect tools are made of hard plastic to secure the strength and sturdiness..
Check Stock

WARN 22680 Quick Connect Winch Power Cable Connector Plugs, 1 Pair

  • {INSULATED FLAME-RETARDANT SHELL}: The shell of the battery quick connect/disconnect is made of high-quality PC flame-retardant material, with a fire rating of UL94 v-0, safe, wear-resistant, and compression-resistant, ensuring stability in use in complex and harsh environments.
  • {SILVER COPPER PLATED TERMINAL}: The thicker copper-plated silver of the battery quick connect disconnect set greatly enhances the electrical conductivity, which helps prevent ignition when large current passes, and ensures stable current transmission.
  • the copper terminal of battery quick disconnect kit is convenient for cold pressing, welding, and faster and firmer wiring.
  • {SPECIFICATIONS AND PACKAGING of the BATTERY QUICK CONNECTOR SET } Voltage: 12-36 volts DC.
  • the package contains 6 groups of 6 to 10 battery quick connectors, including 6 connectors, 12 terminal pins, 6 caps, the quantity is enough to meet your different Demand or replacement.
  • {EASY TO INSTALL}: You can quickly install the plugs of these battery quick disconnect connectors, insert the wires into the terminal pins, and then perform welding or crimping. The ends of the connectors are the same, so both ends are suitable for connecting to the power or load side.
Check Stock

Triple Album Collection Vol 2

  • 3/4-Inch assembled Aluminum Bender includes Kleins unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Easy handling aluminum head is reinforced for added strength.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
  • Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers.
  • Compatible with Kleins 3/4-Inch Angle Setter (Cat. No. 51612) creates a hard stop for quick, accurate, and consistent bends.
Check Stock

DOZYANT 15 Foot 3/4inch ID Natural Gas Hose with Quick Connect/Disconnect Fittings for Generator, Construction Heaters and More NG/Propane Appliance

  • 3/4" ID Natural Gas Hose Connector with a 3/4" Male QD Plug X 3/4" Male Pipe Swivel via Quick-connect Adapter.
  • Used to connect Natural Gas or Propane appliance to a permanent gas supply via quick disconnect.
  • Perfect for connecting your generator to natural and LP gas supply, also used for high BTU output outdoor cooking appliances, construction heaters, and standby generators.
  • The male quick disconnect plug fits into quick disconnect adapter (3/4" quick connect x 3/4" female pipe thread). It shuts off the flow when pipe is removed.
  • Quick disconnect hose assembly. Rubber hose and 100% solid brass fittings, well made and sturdy.
Check Stock

Klein Tools 85091 Power Conduit Reamer with Improved Bit Retention, 1/2-, 3/4- and 1-Inch

  • Power Conduit Reamer reams 1/2-Inch (13 mm), 3/4-Inch (19 mm) and 1-Inch (25 mm) conduit and install fittings in a fraction of the time.
  • Reduce time on projects with large quantities of conduit runs.
  • Designed to fit into power drill chucks and quick release adapters with improved bit retention.
  • Includes precision engineered replaceable reaming blade.
  • Replacement blades (SKU #19353) are available and the only approved blade for use in our tool.
  • Designed to be used on Electrical Metallic Tubing (EMT).
Check Stock

Klein 56206 Conduit Bender with Handle, 1/2'

  • 3/4-Inch assembled Aluminum Bender includes Kleins unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Easy handling aluminum head is reinforced for added strength.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
  • Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers.
  • Compatible with Kleins 3/4-Inch Angle Setter (Cat. No. 51612) creates a hard stop for quick, accurate, and consistent bends.
Check Stock

West System 650-K Aluminum Boat Repair Kit

  • High temperature quick disconnect fitting.
  • Both ends of the quick disconnect have a female 1/4" pipe thread.
Check Stock

Fuel Line Disconnect Tool Set, 22pcs Master Quick Disconnect Tool Kit for Automotive AC Fuel Line and Transmission Oil Cooler Line, Includes Scissor Type Remover, Compatible with GM Ford Chevy Models

  • 22pcs Master Quick Disconnect Tool Kit for separating automotive ac hose and fuel lines, suitable for a wide variety of domestic and foreign automotive..
  • The fuel line disconnect tool set is used for most fuel lines, air conditioning lines, radiator and heater hoses, simple push-on & pull-off action, popular sizes 3/16 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch and 7/8 inch ..
  • The fuel line disconnect tool kit is made of aluminum alloy and plastic steel,and this 22pcs fuel air conditioning line disconnect set can stand up to years of use..
  • The master quick disconnect tool kit for automotive ac fuel line,offset for hard-to-reach areas, fits 5/16 inch , 1/2 inch , 3/8 inch , 5/8 inch , 3/4 inch , 7/8 inch ,4 colored quick ac fuel line quick disconnector 3/8 inch , 1/2 inch , 5/8 inch & 3/4 inch ..
  • Our transmission line disconnect tool for Ford comes with a heavy-duty blow-molded carrying case,helps to protect and store various parts conveniently.High quality products, 100 percent new.If there is any problem in the process of purchase or use, please contact us to solve i....
Check Stock

Jonard Tools ROD-3316 Coated Fiberglass Fish Tape Duct Rodder with Accessory Kit 3/16 x 300

  • CONDUIT RUNNING: Lightweight and portable, this rodder unit is perfect for running conduit inside and outside conduit drops as well as home drops from the hand-hole box to a building.
  • VERSATILE USE: Used for light pole wiring, control wiring, or walker ducts and rod can be pulled horizontally or vertically.
  • NON-CONDUCTIVE: Made with a non-conductive fiberglass core with a yellow nylon coating for high visibility and flexibility.
  • HIGH TENSILE STRENGTH: Can withstand loads up to 200 kgf (441 lbf) for quick and easy pulling.
  • LIGHTWEIGHT & COMPACT: 22” X 17” X 7” (55.88 cm x 43.18 cm x 17.78 cm) and weighing 14.33 lb (6.5 kg) for easy transportation.
Check Stock