Categories

Best Conduit Sealing Locknut

ISPINNER 4pcs NPT 1/2\ Nonmetallic Liquid Tight Electrical Conduit Connector Fittings, UL Listed, 94V-1, Pack of 4

  • HIGH QUALITY - These liquid tight conduit connector fittings are made of high quality nylon, resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Flammability rating 94V-1, temperature index 125℃..
  • SIZE & QUANTITY - 4 Pack of NPT 1/2 Inch.
  • EASY TO USE - Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • PACKAGE - Each connector comes standard with a O-ring and locknut..
  • WIDELY APPLICATION - It can be used for machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration, transformer connection, outdoor lighting and so on..
Check Stock

1 Inch 90 Degree Nonmetallic Liquid Tight Electrical Conduit Conector Fitting, 4 Pack, UL Listed

  • Material: Nylon material, resist sea water, gasoline, alcohol ,grease and so on..
  • Performance: Flammability classification 94V-2.
  • Installation: Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • Application: Suitable for indoor/outdoor usage.
Check Stock

Morris 21816 Liquid Tight Connector Straight Non-Metallic 1-1/4 Thread Size 1-Pack

  • Non-Metallic Liquid Tight Wire Connectors Straight With Steel Locknut - Our Liquid Tight Straight Connectors are weather and corrosion-proof..
  • For use with Non-Metallica Liquid Tight conduit.
  • Type B - Nylon construction with Zinc Die Cast Locknut - resists saltwater, gasoline, alcohol, oil and grease.
Check Stock

1-in Liquid-Tight Connector

  • Superior liquid tight seal and pull out strength.
  • No threading of the conduit or tubing required.
  • Smooth interior surfaces for easier wire installation.
  • Furnished with steel locknut and seal gasket.
Check Stock

Klein Tools D333-8 Conduit Locknut and Reaming Pliers

  • Pliers tighten 1/2-Inch (13 mm) and 3/4-Inch (19 mm) EMT or 1/2-Inch (13 mm) rigid locknuts.
  • Reams and smoothes both inside and outside of conduit.
  • Knurled jaws at nose tip pull wire or fish tape and machined nose fits snugly into locknut wings.
  • Forged in the USA with custom, US-made tool steel for maximum durability.
Check Stock

Valterra RF850 1/4\ MPT x 3/8\ Barb Adapter

  • Right Angle Nylon Cable Glands NPT Thread - These Right Angle Cable Glands are corrosion resistant..
  • Seal & clamp system allows the cord connector to tighten in a circular sequence on the sealing ring to give outstanding strain relief without twisting or damaging the cable.
  • Simply push the cable through the liquid tight Nylon strain relief & tighten locknut for quick installation.
  • Threads into your panel for clearance, locknut included.
Check Stock

OTC 4542 Stinger Wheel Bearing Locknut Socket Set - 7 Piece

  • 7-Piece wheel bearing locknut socket set.
  • For use with 1/ 2 inch ratchet or breaker bar.
  • Set contains 55 mm hex locknut socket 2-3/8 inch hex locknut socket 2-1/ 2 inch hex locknut socket 2-1/ 2 inch rounded hex locknut socket 2-3/4 inch rounded hex locknut socket 2-9/16 inch rounded hex locknut socket and 2-3/8 inch rounded hex locknut socket works.
Check Stock

Mueller Industries 109-814 Float Valves, 0.75 Inch

  • Dual inlet thread for connecting pipe and locknut.
  • Machined flange for support against tank wall.
  • Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves.
Check Stock

1/2\ liquid tight connector 90 degree 20 pack

  • Size & Quantity: 10Pack of NPT 1/2 Liquid Tight Connector..
  • Material:Liquid Tight Connector are made of high quality nylon,Resistant to salt water,weak acid,alcohol,oil,grease and common solvency..
  • Features:The claws and seals of excel lent design,can hold cable firmly and have a wider cable range..
  • Easy to Install:They attach easy to the box and secure tightly to the flex conduit.no diassembly , just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • Widdly Used：Nice tight fit for outdoor electrical box,marine equipment, motors and controls, printing equipment, pumps, refrigeration, transformer connection, outdoor lighting etc..
Check Stock

1/2 Npt Nonmetallic Liquid-Tight 180-Degree Electrical Conduit Connector Fitting,，UL Listed, (6 PACK) (1/2-180D)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

1-1/2inch Nonmetallic Liquid-Tight Electrical Conduit Connector Fitting,，UL Listed, (2 PACK) (1-1/2inch 180d)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

1 PC Tilt Cap/Gland with Seals Fit for Yamaha 200-225-250-300 HP V6 3.3L End Cap Tilt Cylinder 61A-43811-00-00

  • Sealing ring: neoprene 50. Working Temperature: -20 C to 90 C..
  • Easily installed using M25 Threads or to a mounting hole using the locknut..
Check Stock

Goulds SJ20 Vertical Deep Water Well Jet Pump, 2 HP, Single Phase, 230 V.

  • Cast iron, semi-open, non clog impeller is dynamically balanced with pump out vanes for mechanical seal protection.
  • Cast iron volute type for maximum efficiency.
  • Designed for easy installation on A10-20 guide rail or base elbow rail systems.
  • Mechanical seal with SILICON CARBIDE VS. SILICON CARBIDE sealing faces for superior abrasive resistance, stainless steel metal parts, BUNA-N elastomers.
  • Corrosion-resistant stainless steel shaft. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation.
Check Stock