Categories

Best Conduit Strut Channel

Genuine Unistrut Trolley Hanger Kit

  • EACH KIT CONTAINS - (2) Genuine Unistrut P1834-EG Channel Trolley Track Intermediate Support Hanger Brackets, (1) Genuine Unistrut P2950-EG 4 Wheel....
  • PERFECT FOR – Creating your own design of a Unistrut Trolley Track System for a Hoist Application.
  • UNISTRUT ADVANTAGE – High-quality and built to last, Unistrut’s original metal framing strut channel has been used in countless applications for....
  • QUALITY MATERIALS – Durable and long-lasting, this slotted strut channel is constructed of pre-galvanized zinc (ASTM A653). The pristine silver....
Check Stock

Highcraft STC-10T Rooftop Pipe Support Block with Galvanized Steel Strut- Sleeper Curb Replacement- Solid Conduit Standoff Cradle- 750 lb.capacity- 5-3/4 x 9-3/4 in, High Grade Recycled Rubber, Black

  • STRUT INCLUDED: This is a Safe and Convenient Stand for Supporting your Piping, Cable Tray, Electrical Conduit and HVAC Equipment with Strut Clamps on Roofs and Other Flat Surfaces.
  • VISIBILITY AND SAFETY: Ensured with Green Reflector on the Block.
  • SUPERIOR QUALITY: This Solid Pipe Hanger Was Manufactured with 100% Recycled High Grade Rubber and Highly Durable Pregalvanized Steel Strut. Material is UV Resistant and Corrosion Resistant, to Ensure Long Lasting Performance..
  • PROTECTS: Holds Pipe in Place Securely, Dampens Vibrations, and Protects Roof Membrane from Tearing.
  • DIMENSIONS: (see diagram) 9-3/4 in. Length x 5-3/4 in. Width x 4 in. Height x 5.2 lbs. Strut is 1-5/8 in. Width x 13/16 in. Height x 10 in. Long..
Check Stock

Rubber Cushion Strut Clamp 1" NOM (1-1/8" OD) for Mounting Copper Piping, PEX Pipe, CVPC Tubing to Strut Channels [5 Pack]

  • [QUALITY] Zinc plated to prevent corrosion, the heavy duty steel strut clamp brackets with attached bolt and nut clamp securely over a hard rubber cushion to nearly surround the sides of a pipe or tube..
  • [PROTECTIVE RUBBER CUSHION] The hard rubber cushion protects pipe and tube by absorbing shock caused by vibration and temperature changes, reduces unwanted noise, insulates pipe and tubing from metal surfaces, and prevents galvanic corrosion..
  • [APPLICATION] Insert pipe or tube into rubber cushion inside steel strut brackets. Mount strut clamp legs to 1" NOM (1-1/8" OD) strut channels. Attach nut to bolt and tighten..
  • [CONTENTS] Each of the 5 clamps contain two heavy duty zinc plated steel half brackets with attached bolt, a nut, and protective rubber cushion..
  • [VERSATILE] Use for 1" NOM (1-1/8" OD) copper pipe, PEX pipe, CPVC tube, and other conduit tube, hose, and wire applications. Can be hung vertically and horizontally on walls and ceilings. Compatible with unistruts in 1-5/8", 7/8", 13/16" heights..
Check Stock

BILITOOLS Strut Spreader Tool 2 Piece Suspension Tool Compatible with VW Audi BMW Mini Ford Renault ect.

  • Comes with strut spreader tool with 5.5 x 8 mm and 5 x 7 mm. 1/2" Drive.
  • 2 piece strut spreader is designed to expand the spring strut and ball joint mounting to separate the spring strut from the wheel bearing housing..
  • The strut spreader sockets are made with S2 steel for maximum strength and durability, and to resist rotational distortion..
  • The strut spreader sockets are featured an oval shaped head. This design makes it easier to rotate the strut tool in the strut channel..
  • Compatible with Audi, BMW, Citroen, Ford, Peugeot, Renault, Seat, Skoda, VW and Japanese vehicles.
Check Stock

Strut Channel Nuts 3/8-16 Spring Channel Nuts with Zinc Electroplate Finish Long Spring Nuts Great for Use with Strut Channel 10 Pack

  • Sturdy & Durable: The strut channel nuts is electro-galvanized, which has the effect of anti-corrosion and anti-rust, which is very durable and has a long service life..
  • Wide Applications: These spring nuts are often used on channel struts to attach fittings to channel surfaces..
  • Sturdy & Secure: The reinforced design of the spring nut secures your accessories in the channel, providing extra security for extra security..
  • Standard Springs: Thread Size 3/8"-16, Thick 8mm, Pack of 10.
  • After Sales Guarantee: If you have any questions about our strut channel nuts, please contact us and we will give you a satisfactory answer..
Check Stock

Strut Channel Nuts 1/4-20 Spring Channel Nuts with Zinc Electroplate Finish Long Spring Nuts Great for Use with Strut Channel 10 Pack

  • Sturdy & Durable: The strut channel nuts is electro-galvanized, which has the effect of anti-corrosion and anti-rust, which is very durable and has a long service life..
  • Sturdy & Secure: The reinforced design of the spring nut secures your accessories in the channel, providing extra security for extra security..
  • Wide Applications: These spring nuts are often used on channel struts to attach fittings to channel surfaces..
  • Standard Springs: Thread Size 1/4-20, Thick 8mm, Pack of 10.
  • After Sales Guarantee: If you have any questions about our strut channel nuts, please contact us and we will give you a satisfactory answer..
Check Stock

Strut Channel Nuts 1/2-13 Spring Channel Nuts with Zinc Electroplate Finish Long Spring Nuts Great for Use with Strut Channe 10 Pack

  • Sturdy & Durable: The strut channel nuts is electro-galvanized, which has the effect of anti-corrosion and anti-rust, which is very durable and has a long service life..
  • Sturdy & Secure: The reinforced design of the spring nut secures your accessories in the channel, providing extra security for extra security..
  • Wide Applications: These spring nuts are often used on channel struts to attach fittings to channel surfaces..
  • Standard Springs: Thread Size 1/2"-13, Thick 8mm, Pack of 10.
  • After Sales Guarantee: If you have any questions about our strut channel nuts, please contact us and we will give you a satisfactory answer..
Check Stock

100 Strut Channel Nuts 3/8-16 Spring Channel Nuts with Zinc Electroplate Finish Long Spring Nuts Great for Use with Strut Channel 100 Pack

  • Sturdy & Durable: The strut channel nuts is electro-galvanized, which has the effect of anti-corrosion and anti-rust, which is very durable and has a long service life..
  • Wide Applications: These spring nuts are often used on channel struts to attach fittings to channel surfaces..
  • Sturdy & Secure: The reinforced design of the spring nut secures your accessories in the channel, providing extra security for extra security..
  • Standard Springs: Thread Size 3/8"-16, Thick 8mm, Pack of 100.
  • After Sales Guarantee: If you have any questions about our strut channel nuts, please contact us and we will give you a satisfactory answer..
Check Stock

RHKING 4 Wheel Trolley Assembly Roller Trolley 2Pcs Silent M10 Bolt for use with 1-5/8\ Wide and All 1-5/8\ or Taller Strut Channel

  • ✅ Using Simple: Wheel Trolley For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, M10 (3/8inch) Bolt in the middle, 80mm (3.15inch) in length,Design Load in 770 pound..
  • ✅ High strength:The pin shaft in the strut channel trolley bearing is made of solid alloy steel, which ensures the high strength of the Wheel trolley.Intermediate support of solid steel, high strength, impact resistance.Galvanized Zinc, rust protection.
  • ✅ Operate Steadily: Wheel Trolley Standard deep groove ball bearing installation, is very smooth no noise to it when used.Bearing welding positioning, to ensure the stability of the work..
  • ✅ Can used upside down: 3 nuts are prepared in the accessory,so that you can use the dollies upside down..
  • ✅Apply: For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel.
Check Stock

ATLIN Strut Spreader Tool – Strut Socket for Audi, VW, BMW, Mini, Ford

  • Compatibility – The ATLIN strut spreader is designed to fit any vehicle equipped with a pinch bolt style hub which is commonly found on Volkswagen, Audi, BMW, MINI, Ford vehicles. Some compatible models include the 2005+ VW Golf GTI, Jetta, and Passat.
  • Superior Design – Audi and VW spindle housings may require a significant torque to spread apart. Unlike other brands, the ATLIN strut removal tool features an oval shaped head. This design makes it easier to rotate the strut tool in the strut channel.
  • Low Profile – Most strut socket tools are difficult to use due to their length. The ATLIN strut spreader tool was designed to be as low profile as possible, allowing it to fit in tight spaces, thus making your job much easier.
  • High Quality – Crafted from hardened S2 tool steel, a material used in premium tools and known for its extreme toughness, this spreader socket will not yield under high torque applications.
  • Size & Materials – 1/2” drive, pry bit measures 5.5x8.2mm, S2 tool steel, chrome vanadium (CR-V).
Check Stock

4 Wheel Trolley Assembly, Stable Welded Roller Trolley for 1-5/8' Wide and All 1-5/8' or Taller Strut Channel (4)

  • Heavy Duty Build: Our roller trolley assembly is made using highs strength solid steel that’s impact resistant and zinc galvanized to offer protection against rust and corrosion. It features a solid bearing steel pin shaft in the strut channel as well.
  • Secure And Stable Performance: The four bearing trolley assembly features a welded bearing and pin shaft to offer more stability for secure use. It uses deep groove ball bearings to make sure you can operate it smoothly without making any noise.
  • For Long Term Use: Each pack comes with 2 beam trolleys that offer just the right balance of quality, durability, and performance. They offer low noise operation as well as being galvanized to provide smooth opening/closing even in the long term.
  • Versatile And Multi-Purpose: Each 4 wheel trolley assembly offers 450 lbs weight support and is suitable for use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel. It has a Diameter Hole of 9/16" (14mm) and 1/4" (6mm) Thickness.
  • We Have Your Back: If you have any issues with the trolley assembly 4 wheel then just let us know and we will help you resolve them quickly to ensure you are completely satisfied. Please Note: It’s recommended that you use the strut channel horizontally.
Check Stock

Abeicy 3/8-16 Strut Channel Nuts 10 Pack Thickened Standard Spring Nuts with Zinc Plated Use On Channel Struts

  • The 3/8-16 strut channel nuts are zinc plated for corrosion and rust protection and are strong and durable..
  • These standard spring nuts are commonly used in slotted steel struts for mounting, supporting and connecting..
  • These support slot nuts are suitable for fixing accessories such as junction boxes or pipe clamps..
  • Standard spring thread size 3/8"-16, 8mm thick, pack of 10..
  • If you have any questions about our strut channel nuts, please contact us and we will give you a satisfactory answer..
Check Stock

4 Pcs 45 Degree Inside Angle Bracket for ½" Bolt in 1-5/8” Strut Channel, 2 Hole Heavy Duty Metal Corner Connector, Carbon Steel Bracket, Thickness 5.8mm, 3x1½x2⅛ inches

  • Fit for strut channel size: 1-5/8” strut channel.
  • Material: carbon steel Q235B, Surface treatment: electrogalvanized.
  • Size: 3x1½x2⅛ inches (79x40x55.5mm), Thickness: 5.8mm.
Check Stock