Best Configured As A Thermocouple
PATIOSIR Patio Gas Heater Dump Switch, Outdoor Heater Replacement Parts Thermocoupler &Tilt Switch, Garden Heater Igniter Repair Parts
- ☆The head of thermocouple is fixed thread, need to be compared that it is suitable for your heater before purchasing the product..
- ☆Made of high-standard brass and red copper,and ABS materials, during operation, you need to hold the valve for 5-10 seconds and then thermocouple will start work..
- ☆Suitable for Propane gas heaters with Thermoelectric Safety, such as room gas heater, outdoor patio heater and other Thermoelectric gas products..
- ☆The thermocouple is easy to install. The probe is connected to the ignition device, the thermocouple is connected to the valve, and the other two ports are connected to the safety dumping switch, which does not require special tools and is prefect compatible for the original part..
- ☆The safety tipping switch will automatically stop the heater when the heater is tilted or dropped, which can prevent the occurrence of gas leakage when the fire is extinguished and the gas is still on, which is more secure. Suitable for weak dump switches with gas R ≤ 10mΩ..
Check StockInstrukart Dry Block High Temperature Calibrator AI-DBC 650 for Calibration Labs Pharmaceutical divisions Thermal Plants divisions Along with Calibration Certificate
- Accuracy: ±0.6°C, Bath Stability: ±0.5°C.
- Measuring Functions: J Type Thermocouple, K Type Thermocouple, T Type Thermocouple, R Type Thermocouple, S Type Thermocouple, N Type Thermocouple, MA, MV, Volts, Ohms, RTD (Pt 100).
- Temperature Steps: 50°C, 150°C, 300°C, 450°C, 600°C.
- Switch Test: Continuity check with OPEN / CLOSE indication.
- Transmitter Supply: 24V DC ± 10% (Loop Powered).
- Power Supply: 230V AC ± 5% / 50Hz, 500 W for 350UTC.
- Supply Scope: Instrument, Power Cable, Carrying Case, Test Lead(2 & 3 Wire), Insertion Tube, Insertion Tool,Spare Fuses: 6A x 2nos User Manual, Calibration Certificate.
Check Stock3\ Outside Air Kit for Pellet Stoves with 3\ Air Intake Pipe Including Harman Stoves 3\ X 10'
- QuadraFire Thermocouple 800, 1000, 1100i, 1200, 1200i Pellet Stoves 812-0210.
- Top Quality Aftermarket Replacement Part.
- The Thermocouple is the device that monitors the fire after start-up. Once it reaches temp the thermocouple allows the stove to start feeding on it's own in normal operation mode. If your stove goes out after the initial start-up cycle, more than likely the thermocouple needs to be replaced..
- Designed Specifically for the above mentioned models.
Check StockMontague OVEN THERMOCOUPLE 48\ 1036-7
- K-type thermocouple connector with real chromel alumel contacts.
- Miniature or mini k-type connector dimensions.
- Works with all k-type thermocouple wires and extension wires.
- Set of 10 male mini thermocouple connector plugs.
- Compatible with thermocouple plugs from other manufacturers.
Check StockFortinet FortiGate-60D License 1 YR 24X7 FortiCare UTM Protection FC-10-0060D-950-02-12
- High Availability (HA) allows two identical SonicWALL appliances running SonicOS to be configured to provide a reliable, continuous connection. One SonicWALL device is configured as the Primary unit, and an identical SonicWALL device is configured as the Secondary unit. If the Primary SonicWALL fails, the Secondary SonicWALL takes over to secure a reliable connection between the protected network and the Internet. Two appliances configured in this way function as a High Availability Pair..
Check StockEmerson H06F 36 Universal Junction Block Thermocouple 36 inch
- 36 inch junction block thermocouple with energy cut-off.
- Stainless steel element construction for prolonged thermocouple life.
- Standard coaxial thermocouple 11/32 inch double lead thread.
- Universal adapter fittings included with each kit for replacing thermocouple in most types of pilot burners.
- Works for both LP and natural gas applications.
Check StockCooper Atkins 35132 Aquatuff with Wrap&Stow Duraneed
- Waterproof Thermocouple Thermometer - Precise digital thermocouple thermometer, delivers a true +/- 0.9 degrees Fahrenheit accuracy and probes can be replaced in the field without the need for recalibration.
- Heavy Duty Probe Cable - Patented thermocouple thermometer probe cable that neatly wraps and stows around the instrument. Uses any K Type probe.
- DuraNeedle Probes - Best used for dense meats. Also works well with soft foods and liquids. Probe is calibrated with instrument for Total System Accuracy.
- Waterproof Digital Thermocouple - Large easy to read digital LCD display, auto shutoff after 10 minutes of non-use. IPX7 waterproof rated.
- Cooper-Atkins Corporation - Headquartered in Middlefield, CT, Cooper-Atkins has been a leading manufacturer of quality time, temperature, and humidity instruments serving the Foodservice, HVAC and Healthcare markets since 1885.
Check StockSonicWall TZ270 High Availability (02-SSC-6447)
- High Availability (HA) allows two identical SonicWALL appliances running SonicOS to be configured to provide a reliable, continuous connection. One SonicWALL device is configured as the Primary unit, and an identical SonicWALL device is configured as the Secondary unit. If the Primary SonicWALL fails, the Secondary SonicWALL takes over to secure a reliable connection between the protected network and the Internet. Two appliances configured in this way function as a High Availability Pair..
- 10/5/2.5/1 GbE interfaces in a desktop form factor.
- Single-pane-of-glass-management through cloud or firewall.
- SonicWall Switch, SonicWave Access Point and Capture Client integration.
- The latest SonicWall TZ series, are the first desktop form factor nextgeneration firewalls (NGFW) with 10 or 5 Gigabit Ethernet interfaces. The series consist of a wide range of products to suit a variety of use cases..
Check StockSonicWall NSA 3650 High Availability 01-SSC-3215
- High Availability (HA) allows two identical SonicWALL appliances running SonicOS to be configured to provide a reliable, continuous connection. One SonicWALL device is configured as the Primary unit, and an identical SonicWALL device is configured as the Secondary unit. If the Primary SonicWALL fails, the Secondary SonicWALL takes over to secure a reliable connection between the protected network and the Internet. Two appliances configured in this way function as a High Availability Pair..
- Delivers high-speed threat prevention over thousands of connections for mid-sized organizations.
- Combines multi-core hardware with Reassembly-Free Deep Packet Inspection technology to maximize scalability.
- Application intelligence provides granular control and real-time visualization of thousands of applications.
Check StockThermocouple Probe Kit Compatible with Traeger Ironwood 650/885 and Pro 575/780, KIT0422
- T-type thermocouple connector, real Copper / Contstantan contacts.
- Miniature or mini T-type connector dimensions.
- Works with all T-type thermocouple wires and extension wire.
- 5 sets, each contains a male and a female connector (2 pieces).
- Compatible with thermocouple plugs from other manufacturers.
Check StockFluke 51 II Single Input Digital Thermometer
- Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
- Measures temperatures in celsius, fahrenheit, or kelvin via a type k, type j, type t, or type e thermocouple probe.
- Includes a type k bead thermocouple probe with a 40" cable that measures from minus 40 to +260 degrees c ( minus 40 to +500 degrees f).
- Provides the relative time of minimum, maximum, and average temperature measurements for monitoring.
- Conforms to nist standards for compliance with regulations.
Check StockThermocouple replacement for Desa LP Heater 098514-01 098514-02
- The 098514-01 Thermocouple will fit the following Comfort Glow Vent-Free wall heater model numbers:.
- The 098514-01 Thermocouple will fit the following Blue-Flame Vent-Free Natural Gas Heater wall heater model numbers:.
Check Stock3D Printer T-K500 m3 x 15mm K Type Thermocouple Sensor K-Type Compatible with Volcano V6 HOTEND Block 500℃ PEI PEEK High Temperature 3D Printing
- This Thermocouple sensor is 3mm x 15mm cylindrical package with 1 meter long cable compatibility with all ID 3mm cartridge-style heater blocks..
- Thermocouple Wire with 304SS Braid Over Glass Insulation,Durable, Flexible and Long Lasting.
- Thermocouple sensor for high temperature printing up to 500C and 450 degree long hours guaranteed.
- Package: 1piece K type thermocouple (Positive wire: Yellow.
- Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference, if you need an amplifier module, please search the ASIN ID " B08C4Z9PZS ".
Check Stock