Categories

Best Connecting Rod Bearing

4-Jaw Self-Centering Chuck Set, Z011 Four Jaw Mini Lathe Chucks w/ Connecting Rod & Wrench, Mini Power Lathe Machine Replacement Parts Accessories (Type C)

  • 【3 Jaw or 4 Jaw Self-Centering Chuck Set for Mini Lathe】- Type B comes with 1 x Connecting Rod + 1 x Three Jaw Chuck + 2 pcs x Short Sticks.
  • Type C - 1 x Connecting Rod + 1 x Four Jaw Chuck + 1 x Wrench. This chuck connecting rod is suitable for Z011 Three Jaw or Four Jaw Woodworking Mini Lathe Chuck..
  • 【Mini Lathe Chuck & Connecting Rod Replacement】- You can use it to replace the old or brocken one. The clamping range of this chuck is between 1.8-56mm, which is suitable for clamping a variety of industrial parts..
  • 【Compact Size, Easy to Use】- Mini Lathe Chuck diameter about 48mm, Outer diameter about 12 mm-65 mm, Inner diameter about 1,8mm-56mm.
  • 2. Connecting Rod size about 5.2cm x 6mm/2.05x0.24inch (LxD), Connecting Thread about M12x1mm. Perfect for mini metal and wood lathes..
  • 【Stainless Steel Chuck Connecting Rod】- The Connecting Rod is made of High carbon steel material, anticorrosion, not easy to rust, durable and sturdy, ensure it has high hardness and can be reused..
  • 【Practical Power Lathe Accessories】- Our chuck connecting rod is stable and has great performance while using, it is the ideal choose for you. High accurate connecting rod so that they can better fit with the Mini Lathe Machine Parts..
Check Stock

CNS Main Rod Bearing Kit Compatible/Replacement for BMW E34 E36 E46 E53 E83 E60 E39 M50 M52 M54

  • COMPATIBLE WITH: BMW E34 E36 E46 E53 E83 E60 E39 M50 M52 M54.
Check Stock

Generic Honing Fixed Angle Sharpening Graver

  • the Angle of ening tool, and of gravity is stable without skidding..
  • Bearing made of high quality steel, to rust, connecting rod made of aluminum alloy, light and durable.
  • When using ening tool, smoothly the polishing tool such emery piece, sandpaper, etc..
  • Applicable: wood , Planer, Graver, carving tool, , edge , the thickness is within 15mm.
Check Stock

Generic Brass Angle Holder for

  • Applicable: wood , Planer, Graver, carving tool, , edge , and more the thickness is within 15mm.
  • Easy to the Angle of ening tool, and the center of gravity is stable without skidding..
  • Bearing made of high quality steel, not easy to rust, connecting rod made of aluminum alloy, light and durable.
  • When using the product ening tool, it can smoothly fit with the polishing tool such as or emery piece, sandpaper, etc..
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life..
Check Stock

40 Sets Furniture Board Cam Fitting with Dowel and Pre-Inserted Nut, 3 in 1 Cam Lock Nuts for Cabinet Drawer Dresser and Wardrobe Furniture Panel Connecting (Dowel M6x36mm, Cam Fitting ¢15x13mm)

  • [SPECIFICATIONS] Cam fittings: diameter 15mm (0.59"), height 13mm (0.51"). Connecting rod bolts: total length 36mm (1.41"), thread length 9mm (0.35"), thread diameter 6mm (0.24"). Plastic nuts: diameter 10mm (0.39"), height 9mm (0.35").
  • [MATERIAL] Pre-assembled nuts are made of plastic, cam fittings are made from aluminum alloy, and connecting rod bolts are made from high quality zinc alloy with nickel plated on the surface, they have good corrosion resistance, rust resistance, high hardness and stable structure to ensure long service life..
  • [APPLICATION] The perfect partner for installing furniture, they can make the vertical connection between furniture panels. They can be applied to board wardrobes, shoe cabinets, drawers, cabinets, bed cabinets, etc., especially particle board and particle board..
  • [EASY TO USE] Super easy to install and remove, they save you a lot of time and energy. 1. Knock the plastic pre-insertion nut into a target position on the plate one. 2. Use a cross screwdriver to screw the connecting rod nut into the pre-assembled nut on the plate one. 3. Aligh the hole of plate two with the connecting rod bolt and place it on the plate one, then tighten the cam fitting clockwise to tighten the connecting rod bolt..
Check Stock

King \XP\ Racing Performance Main Rod Engine Bearing Set Compatible with 02 - 14 Acura / Honda 2.0L / 2.3L / 2.4L DOHC K20A2 K20 K23A1 K24A K24

  • COMPATIBLE WITH: 02 - 14 ACURA / HONDA 2.0L / 2.3L / 2.4L DOHC K20A2 K20 K23A1 K24A K24.
  • 1 KING RACING [XP] SERIES Crankshaft Main Bearing Set (Standard Size).
  • 1 KING RACING [XP] SERIES Connecting Rod Bearing Set (Standard Size).
  • 1 KING Thrust Washer Set (Standard Size).
Check Stock

Allstar ALL96478 Engine Connecting Rod and Piston Holder , Black

  • Engine connecting rod and piston holder measures 24 inch long x 12 inch wide x 9-1/2 inch tall.
  • This combination rod and piston holder safely supports piston and connecting rod assemblies during engine teardowns or assembly.
  • Slots are 4-3/4 inch long x 1-1/2 inch wide to accommodate most piston/rod combinations.
  • Assembly is required and can also be disassembled if desired after use for easy storage.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life. Includes two stands - enough for both heads.
Check Stock

KIARUO Pneumatic Rivet Nut Gun with Self-locking Head Gun 1/4 & 5/16 & 3/8 Mandrels,Industrial Grade Adjustable Speed Pull Rivnut Gun Model LM07 Button Switch

  • ...rove work efficiency, convenient and fast..
  • ★HIGH QUALITY：Rivet nut gun with speed adjust knob, Adjust the size of gas, Effectively adjust the intensity and speed of work.Embedded muffler vent, effective reduction of noise generated during work..
  • ★STURDY & DURABLE：Use of impact resistant steel S2 material connecting rod effectively prevent the connecting rod wear ，effectively reduce shaking, uniform strength.High quality rotor， forging with high quality alloy steel, Higher accuracy, strong wear resistance,have long performance life..
  • ★SHOCKPROOF DESIGN :The shockproof design eliminates the impact of the rivet nut gun on the arm during operation, Light weight, Users are not easily fatigued when they use it for a long time.Anti-slip handle with ergonomic design that make it easier to operate, comfortable to hold..
  • ★NOTE:With increasing frequency of use，the mandrel will wear, Pls replace as needed,Equipped with bearings for you to extend the service life of the gun head, reduce the cost of replacing the gun head.Quality issue or any questions, please come to us. We would work out asatisfactory solution to your problems..
Check Stock

Sunnytech Mini Hot Air Stirling Engine Motor Model Educational Toy Kits Electricity HA001

  • ...an make offer for your future parts requirement..
  • SMART SIZE WITH TONS OF MECHANICAL KNOWLEDGE----This stirling engine designed reasonable and compact. it adopts Lever mechanism and Crank-rocker Mechanism, it looks more Mechanical and cool. This machine contains pattern of connecting rod piston, crankshaft, lever, belt drive, gearing, worm drive, transmission, threaded fastener, rolling bearing, plain bearing, heat transfer, sealing techniques etc. It only measure to 100x45X50MM, you can bring it home, school office with convenient in your bag..
  • AMAZING CONVERSATION PIECES ON YOUR DESK----It's funny to see people's looks and reactions when they squeeze a little shot for this Stirling engine. Put some combustibles and get the flywheel going, and then it works like charm. All of your guests want to know what happened, ice-breaking success. What a marvelous toy.
  • YOU GET EXTRA BONUS EXCEPT THE STIRING—We send extra fan kits as free gift to delight you much more. With those parts, you can DIY your own stirling engine fan in 5mintues. Picture instructions about how to install the fan enclosed in the gallery..
Check Stock

Mingdun 4 Sets Cylinder Head Cover Bolts 66cc 80cc 2- Srtoke Engine Motorized Bike

  • Includes the following components: Cylinder, Cylinder Head,, Piston, Piston Rings, Piston Pin, Circlips, Connecting Rod Bearing, Spark Plug,, Head Gasket, Base Gasket, Reed Valve, Reed Valve Gasket, Exhaust Gasket, Fan Cover.
  • Alpha Sports Kolt 50 and LG 50 2-stroke 50cc ATVs.
  • E-Ton 50cc 2-Stroke Beamer scooters: Beamer PN2Beamer II PN2B, Beamer III PN2D, Beamer Matrix PN2C, Beamer Matrix II PN2E, Beamer R2-50 PN2G, Matrix 50 PN2H.
  • E-Ton Viper 50 (RXL-50), Viper 50 Mini (RXL-50M), Lightning 50 (AXL-50 / NXL-50), Impulse 50 (TXL-50) 2-stroke ATVs.
  • compatible with Polaris Predator 50, Scrambler 50 and Sportsman 50 2-Stroke ATVs.
Check Stock

INPANOLS Air Rivet Nut Tool Kit, Pneumatic Rivnut Gun with 1/4'', 5/16'' & 3/8'' Mandrels

  • SELF-LOCKING GUN HEAD: Comes with 1/4, 5/16 M8, 3/8 M10 gun heads as well as their 1 bearing & 6 mandrels of each size. Quick and easy to change the gun head without tools due to the self-locking design..
  • LONG PERFORMANCE LIFE: The mandrel, bearing, and connecting rod are all made of high hardness alloy steel, and we have added Industrial lubricant to the gun head to make the rivet nut gun more accurate, more wear-resistant, and longer in service life..
  • ERGONOMIC DESIGN: Small and light gun-like shape, non-slip handle and shock-proof design make it easier and more comfortable to use for long periods of time with one hand..
  • POWERFUL FUNCTION: Air regulating valve, adjust work intensity and speed. Muffler to reduce noise. The 1/4 air inlet port with a built-in dust filter can effectively prevent foreign objects from entering the body and protect the internal parts of the nut gun..
  • NOTE: The mandrel is a consumable item, and bearings and industrial lubricants can extend its life. We also provide 6 mandrels for each gun head so you can use it longer..
Check Stock