Categories

Best Connecting Terminals

RockDIG 260PCS AWG 22-16 16-14 12-10 Copper Ring Fork Terminals Tin Plated Non-Insulated Electric Wire Connectors

  • Material: The non-insulated ring/fork terminals are made from 99.9% pure copper, the tin plated helps resist corrosion and it also makes them easy to solder..
  • Thickness: T=0.75mm for AWG 22-16 terminals.
  • To Use: Can be crimped with any standard low-cost crimping tool, and use heat shrink tubing to insulate to protect the connection..
  • Usage: Suitable for connecting mechanical relays or contactors to engines or other automotive circuits..
Check Stock

10 Pairs Copper Gold Plated 4 Gauge Strip Spade Terminal Spade Fork Adapters Connectors Plugs Crimp Barrier Spades for Speaker Wire Cable Terminal Plug - 4GA Red and Black

  • High quality insulated crimp fork terminals connectors, superior electrical contact.
  • 4 gauge power wire/ ground wire fork terminals；Alternative for banana plugs. Safer than connecting bare wires..
  • Premium copper heat tested, gold plated to protect against corrosion..
  • To ensure increased power flow and the highest quality audio without distortion..
  • 10 pairs of crimp terminals and connectors；10 red boots and 10 black boots of crimpable fork terminals..
Check Stock

Briidea 2-Mile Electric Fence Energizer for Preventing Wild Animals Intruding 8 Acres Output Voltage 5000 V 0.1Joule

  • [Available Controlling Range] Having been designed for use with electric animal fences, the fence energizer is capable to control an area of 8 acres, and is compatible with most soil types.
  • [Two Terminals] This fence energizer is standard equipped with two terminals, of which one is fence ground terminal for connecting to a separate ground system, the other one is fence output terminal for connecting to the fence.
  • [Security Protection] With its cable having been listed by UL after a series of strict tests, this unit is more secure and reliable to use and is capable of fire prevention.
  • [Warning Sings Needed] A warning sign shall be fitted to every point where persons may gain ready access to the conductors.
  • [For Controlling Animals] This unit is capable to both defend the domestic animals inside the fence and prevent wild animals such as bears, raccoons, skunks intruding on the domestic ones.
Check Stock

Arcade 5-pin to 4.8mm (.187\) Micro switch Terminals Conversion Harness Wires Cable for joystick / Jamma Loom Harness extender / MAME Bartop Cabinet Machines / Arcade1Up, Raspberry Pi

  • The 5-pin to 4.8mm (.187") Microswitch Terminals Conversion Harness is the perfect choice for connecting joysticks with .187” microswitch terminals and interfacing them to a Sanwa JLF-H harness..
  • Simply slide into the existing Sanwa JLF-H or JST-XH harness in your fightstick and the other end of this harness will connect the harness to the .187” terminals on Jamma Loom Harness Extenders..
  • Interfaces to a Sanwa JLF-H or JST-XH cable.
  • Converts joysticks with standard .187” microswitch terminals for use with Jamma Harness externders.
Check Stock

Open Terminal Connector Crimping Tool Kit,2.8mm 3.5mm 3.9mm 4.8mm 6.3mm 24-14 AWG Crimper SOMELINE for Use on Molex 2.13mm 2.36mm AMP - TE CONNECTIVITY Connectors,Male Female Spade and Ring Terminal

  • ...ts. 240 wire crimp terminals (TAB 2.8mm, 4.8mm, 6.3mm spade connectors and insulating sleeves) for 24-14 AWG cable. A portable storage box is provided for easy storage and sorting of cable terminations..
  • ✅【Ring Terminal】Brass ring terminals, commonly used for cycling battery connections and ground connections, connecting aftermarket switches, ignition coils, ground wires, and similar items that require screws or bolts..
  • ✅【Widely Application】The combination of crimping tool and spade bullet connectors can be widely used to home appliances, auto, audio system for battery or rocker switch quick connecting / disconnecting, motorcycle, scooter, auto, car, truck, boat，Arduino, 3D printer, PCB, jumper wire and other electronic DIY projects etc..
Check Stock

2 Pairs Copper Gold Plated 0 Gauge Spade Terminal Crimp Connectors Adapters Crimp Barrier Spades for Speaker Wire Cable Terminal Plug - 0GA (Red and Black)

  • This package comes with 3 pairs of crimp terminals and connectors. 3 red boots and 3 black boots of crimpable fork terminals..
  • 0 gauge power wire/ ground wire fork terminals..
  • Premium copper heat tested, gold plated to protect against corrosion and to ensure increased power flow and the highest quality audio without distortion..
  • Alternative for banana plugs. Safer than connecting bare wires..
  • High quality fork terminal, superior electrical contact..
Check Stock

3 Pairs Copper Gold Plated 0 Gauge Spade Terminal Crimp Connectors Adapters Crimp Barrier Spades for Speaker Wire Cable Terminal Plug - 0GA (Red and Black)

  • High quality fork terminal, superior electrical contact..
  • Premium copper heat tested, gold plated to protect against corrosion and to ensure increased power flow and the highest quality audio without distortion..
  • 0 gauge power wire/ ground wire fork terminals..
  • Alternative for banana plugs. Safer than connecting bare wires..
  • This package comes with 3 pairs of crimp terminals and connectors. 3 red boots and 3 black boots of crimpable fork terminals..
Check Stock

Minn Kota 1820175 Trolling Motor Marine Battery Power Center

  • This battery box / power center contains easy access external battery terminals that allow trolling motor leads and charger leads to be connected to the battery posts without opening the box.
  • Protects your battery (not included) on a small boat, transom application (boats that do not have battery compartments).
  • Built-in, push button battery meter with 4 LEDs displays current “state of charge”.
  • 60A resettable circuit breaker connected to top.
  • 10A resettable circuit breaker connected to two accessory ports.
  • Ring terminals on inside battery connectors.
  • Compatible with group 24 and 27 size batteries.
  • Overall dimensions: 7" x 13.5" wide x 12" tall.
  • Motor center ideal for small-boat transom applications.
  • Easy-access batter terminals for connecting leads.
  • Built-in battery meter displays current "state of charge".
  • Designed to fit group 24- and 27-size batteries.
  • Offers pair of 12-volt accessory plugs and manual reset circuit breakers.
Check Stock

5 Pairs Copper Gold Plated 8 Gauge Strip Spade Terminal Spade Fork Adapters Connectors Plugs Crimp Barrier Spades for Speaker Wire Cable Terminal Plug - 8GA (Red and Black)

  • Premium copper heat tested, gold plated to protect against corrosion and to ensure increased power flow and the highest quality audio without distortion..
  • Alternative for banana plugs. Safer than connecting bare wires..
  • High quality fork terminal, superior electrical contact..
  • This package comes with 5 pairs of crimp terminals and connectors. 5 red boots and 5 black boots of crimpable fork terminals..
  • 8 gauge power wire/ ground wire fork terminals..
Check Stock

Sscon 600V 25A 20 Position Dual Row Wire Barrier Block Terminal Strip TB-2520

  • Total Size: 255 x 30 x 20mm / 10.03" x 1.18" x 0.78" (L*W*H).
  • Package Content: 1 x Barrier Terminal Block.
  • Each Pair of Terminals - is insulated from the next, prevent circuit in disorder..
  • High Safety: Removable Plastic Insulating Cover,Prevents accidental contact the terminals..
  • Widely Application - Suitable for wires connecting of home appliances, electronic circuits, machines, etc..
Check Stock

Pioneer VSX-834 7.2-Channel AV Receiver

  • The VSX-834 supports pass-through for HDR10, hlg (hybrid log-gamma), and Dolby vision signals. By connecting a compatible source device, you can enjoy these latest video standards on a compatible display. What’s more, All HDMI terminals support 4K (60p/4: 4: 4/24-bit), wide color gamut (BT. 2020), and HDCP 2. 2, so you will have no problem when upgrading to new devices, and can also enjoy premium content such as 4K videos with digital copy protection..
  • Create the optimum acoustic environment with pioneer’s MCACC (multi-channel acoustic calibration system), developed with the expertise of professional recording studios. With the custom microphone, The system automatically compensates for differences in speaker size, level and distance, and equalizes response..
  • The VSX-834 is equipped with zone B Audio output terminals for expanding the main zone sound by connecting your wireless headphone Dock. You can listen to the sound playing in the living room via wireless headphones..
  • Stream songs from compatible devices with the built-in Bluetooth Wireless Technology (ver. 4. 2 + LE). The VSX-834 features A2DP/AVRCP profiles, with support for SBC/AAC codecs. By pressing the Bluetooth button on the front panel, you can directly start up the BT function, even wh....
Check Stock

Wire Terminal Crimping Tool Kit Qibaok Ratcheting Wire Crimper AWG 22-16 0.5-1.5mm² with 500PCS Female Male Spade Connectors & Bullet Connectors Terminals

  • Package Included: A self-adjusting wire terminals crimping pliers and high quality 500pcs wire crimp terminals with 500pcs insulating sleeve assortment kit..
  • Wire Crimper Design: Made of high-carbon steel and TPU insulated rubber, and ratcheting mechanism design help you take less strength to make a good crimp. Crimping range is AWG22-16, 0.5-1.5mm², suitable for TAB 2.8mm, 4.8mm, 6.3mm spade connectors and 3.5mm, 4.0mm Bullet connectors..
  • Premium Material: The terminal block are made of tin-plated red copper and the insulating sleeves are made of nylon. High conductivity, anti-oxidation, durable enough for most wiring projects..
  • Easy To Use: Just need to connect the male and female terminals at both ends, and then the male and female terminals docked to complete the wiring easily..
  • Wide Applications: The combination of crimping tool and spade bullet connectors can be widely used to home appliances, auto, audio system for battery or rocker switch quick connecting / disconnecting, motorcycle, scooter, auto, car, truck, boat etc..
Check Stock

Teansic 1000Pcs Quick Splice 2.8/4.8/6.3mm Male and Female Wire Spade Connector Copper Ring Terminal with Insulating Sleeve Assortment Kit for Electrical Wiring Car Audio Speaker

  • 【What You Will Get】Total 1000pcs in the package, includes 2.8mm, 4.8mm, 6.3mm male and female wire spade connectors, each for 50pcs, 2.8mm, 4.8mm, 6.3mm male and female insulating sleeves, each for 50pcs, M3, M4, M5, M6 ring crimp terminals, each for 50pcs, 200pcs U shape copper crimp terminals . Freedom to choose from a variety of wire sizes..
  • 【High Electrical Conductivity】The quick splice wire terminal block is made of brass material, which can ensure the credible conductivity and anti-oxidation. The insulating sleeves are made of nylon that provides good insulation and waterproof performance..
  • 【Easy to Operate】No more welding hot. You just need to connect the male and female terminals at both ends, and then the male and female terminals docked to complete the wiring easily, and also disconnected when not needed..
  • 【Precise Size 】All of our terminals are produced according to international standards, and the tolerance of plus and minus is within 0.05mm. You won’t be troubled by inappropriate size..
  • 【Widely Used 】The wire connectors are appled for home appliances, vehicle, and electrical equipment. It can be quick connecting/disconnecting different kinds of power cables, such as car and audio systems, switch fast connection, etc..
Check Stock