Categories

Best Connector Type

Rocstor 3FT Mini HDMI to HDMI Cable-M/M

  • Connector on First End: HDMI (Type A) Male Digital Audio/Video.
  • Connector on Second End: HDMI (Mini Type C) Male Digital Audio/Video.
Check Stock

Rocstor 6FT Mini HDMI to HDMI Cable-M/M

  • Connector on First End: HDMI (Type A) Male Digital Audio/Video.
  • Connector on Second End: HDMI (Mini Type C) Male Digital Audio/Video.
Check Stock

Genuine Dell Optiplex 980 Small Form Factor (SFF) System Motherboard Mainboard Systemboard, Compatible Part Number: C522T

  • Chipset: Intel Q57 Express chipset, Supported Processors: Quad-Core - Intel Core i7 series, Intel Core i5 series, Dual-Core - Intel Core i3 series, Intel Pentium, Socket Type - LGA1156.
  • Supported Memory: Type - DDR3 SDRAM (non-ECC memory only), Speed 1066 MHz or 1333 MHz, Connectors - four, Capacity - 1 GB, 2 GB, or 4 GB, Minimum memory - 1 GB, Maximum memory - 16 GB, Audio: integrated.
  • Video: Integrated Intel graphics media accelerator HD, Peripheral Interfaces: Back panel -two connectors for line-in/ microphone and line-out, Front panel - two front-panel connectors for headphones and microphone, eSATA - one 7-pin connector, Network -one RJ45 connector, Parallel -one 25-pin connector (bidirectional), Serial -one 9-pin connector.
  • 16550C-compatible, USB - Front panel - two connectors, USB - Back panel -six connectors, Video - one 15-hole VGA connector one 20-pin DisplayPort connector.
  • System Board Connections: one 120-pin connector PCI Express x16 data width (maximum), one 164-pin connector Express Lane, Serial ATA - three 7-pin connectors, Memory - four 240-pin connectors, Internal USB - one 10-pin connector (supports two USB ports), Processor fan - one 5-pin connector, Front I/O - one 26-pin connector, Front panel control - one 14-pin connector, Proces....
Check Stock

Fumei NMO to PL259 Adapter NMO Mount Assembly with NMO and SO-239 UHF Female Connector

  • This Adapter is assembled by three parts, the UHF female connector(SO-239 to SO-239), the NMO nut on UHF connector, the NMO PIN in UHF connector.
  • You can assemble NMO mount for NMO type antenna with this adapter.
  • Easy way to convert UHF mount type to NMO mount type.
  • Screw length of UHF female connector(SO-239 to SO-239) is 45mm.
Check Stock

Thermocouple Probe Kit Compatible with Traeger Ironwood 650/885 and Pro 575/780, KIT0422

  • T-type thermocouple connector, real Copper / Contstantan contacts.
  • Miniature or mini T-type connector dimensions.
  • Works with all T-type thermocouple wires and extension wire.
  • 5 sets, each contains a male and a female connector (2 pieces).
  • Compatible with thermocouple plugs from other manufacturers.
Check Stock

uxcell 3pcs DC 9V Battery Clip T-Type Buckle Connector Faux Leather Housing Lead Wire 12cm Long

  • Package Content: 3pcs x Battery Clip Connector.
  • Buckle Size: 28 x 21 x 6mm / 1.1" x 0.83" x 0.24" (L*W*H).
  • 9V battery clip connector, T-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 12cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock

uxcell 10pcs DC 9V Battery Clip T-Type Buckle Connector Faux Leather Housing Lead Wire 12cm Length

  • Package Content: 10pcs x Battery Clip Connector.
  • Buckle Size: 28 x 21 x 6mm / 1.1" x 0.83" x 0.24" (L*W*H).
  • 9V battery clip connector, T-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 12cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock

Electrodepot 433 MHz Unity Gain Omni, 6 Inches Antenna with Magnetic Base and Male SMA Connector Impedance 50 Ohms

  • Digi-Code 5166-03 Radio Receiver Remote Antenna Mounting Kit With 15' Coaxial Cable With F-Connectors, Antenna And Antenna Mounting Bracket. Ideal for use with radio receivers that have the F-connector type antenna typically used on gate openers when a remote antenna is needed to improve remote control signal reception and range..
  • Product Description: Remote Antenna Mounting Kit Ideal For Commercial And Gate Radio Receivers The Digi-Code 5166-03 also known as the DC-5166-03 remote antenna mounting kit is ideal for use with F-connector versions of gate radio receivers to improve signal reception and remote control range. This remote antenna kit allows the antenna to be located in more desirable location to increase the operating range especially with gate openers that use a metal cover, which tends to block the signal from.
  • Product Features: Works with all brands of radio receivers that use a standard F-connector type antenna. 15 feet commercial grade coaxial cable F-connector and rubber boot on each end 5 inch long by 2 inch L bracket with 2 mounting screw holes F-connector barrel connector on L bracket 10 inch whip type antenna with F-connector One-Year manufactures warranty.
Check Stock

Bingfu CB Antenna 27MHz Magnetic Base CB Radio Antenna BNC & PL259 Male CB Antenna Compatible with Cobra Midland Uniden Maxon President Portable Handheld CB Radio Mobile Radio Police Scanner

  • Compatible with all handheld CB radios from many brand with a BNC connector, improve quality and range to CB radio reception. The antenna design is soft, flexible and durable, works on all channel within CB radio frequency range of 26MHz to 27 MHz..
  • Antenna Mounting Connector Type: BNC Male Connector.
  • Feature: with 7cm Diameter Magnetic Base.
  • Cable Connector Type: BNC Male Connector.
  • Accessories: UHF PL-259 Male Connector Adapter.
  • Package List: 1 x Antenna, 1 x Magnetic Base, 1 x Connector Adapter (As the Picture Shown).
  • Compatible with Handheld CB Radios: Uniden PRO401HH PRO501HH PC88LTX, Cobra HH50WXST H38WXST HHRT50, Midland 75-785 75-822 7W44, Maxon HCB-10C.
Check Stock

Tecreddy CB Radio Antenna Soft Whip BNC & PL259 Male CB Antenna with Magnetic Base Compatible with Cobra Midland Uniden Maxon President Portable Handheld CB Radio Car Mobile Radio Scanner

  • Compatible with all handheld CB radios with a BNC or UHF connector, improve quality and range to CB radio reception. Compatible with Handheld CB Radios: Uniden PRO401HH PRO501HH PC88LTX, Cobra HH50WXST H38WXST HHRT50, Midland 75-785 75-822 7W44, Maxon HCB-10C..
  • This soft whip antenna can be removed and installed directly on the CB radio for use. The antenna design is soft, flexible and durable. It can also be used on a magnetic base. Both usages are very convenient..
  • Antenna&Cable Connector Type: BNC Male Connector.
  • Cable Connector Type: BNC Male Connector.
  • Accessories: UHF PL-259 Male to BNC Female Connector.
  • Package Includes: 1 x Antenna, 1 x Magnetic Base, 1 x Connector.
Check Stock

uxcell 7pcs DC 9V Battery Clip I-Type Buckle Connector Faux Leather Housing Lead Wire 14.5cm Length

  • Package Content: 7pcs x Battery Clip Connector.
  • Buckle Size: 30 x 16 x 6mm / 1.18" x 0.63" x 0.24" (L*W*H).
  • 9V battery clip connector, I-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 14.5cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock

uxcell 3pcs DC 9V Battery Clip I-Type Buckle Connector Faux Leather Housing Lead Wire 14.5cm Length

  • Package Content: 3pcs x Battery Clip Connector.
  • Buckle Size: 30 x 16 x 6mm / 1.18" x 0.63" x 0.24" (L*W*H).
  • 9V battery clip connector, I-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 14.5cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock

uxcell 10pcs DC 9V Battery Clip I-Type Buckle Connector Faux Leather Housing Lead Wire 14.5cm Long

  • Package Content: 10pcs x Battery Clip Connector.
  • Buckle Size: 30 x 16 x 6mm / 1.18" x 0.63" x 0.24" (L*W*H).
  • 9V battery clip connector, I-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 14.5cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock