Audio2000'S Microphone Cable (ADC203M-P)
- Cable Spec.: [(20/0.12BC+PVC1.5)* + /0.12BC+PVC6.0].
- Metal XLR Female Connector to Metal XLR Male Connector.
- Cable Thickness: 6mm ^Cable Spec.: [(20/0.12BC+PVC1.5)*2C + Cotton+SP60/0.12BC+PVC6.0] ^Shielded Balanced Audio Cable ^Metal XLR Female Connector to Metal XLR Male Connector ^Oxygen-Free Copper Wires.
Check Stock
CHQHJIA Lever Nut Wire Connector T11 Push-in Terminals Blocks Universal Compact 3 Pin 1 WayWire T Tap Connectors Electrician Quick Splitter 16PCS Boxed Kit for AWG 28-12
- 【Product features】: CHQHJIA lever wire connectors is a reusable and creative connector,instead of traditional electrical tape and electrical butt connectors twist-type.This wire connector adopt special and scientific design, which will save space effectively..
- 【Universal Compatibility】:CHQHJIA T11 It is a universal 3-way connector for soft and hard wires, divided into concave and convex, and can also be used in splicing. The connector is extensive Used in home improvement wiring, hotel factory lighting connection, etc..
- 【Safe and Reliable】: CHQHJIA Lever Nut Connector The shell is made of PA66 material, high temperature resistance, melting point 260°.The wire is in contact with the conductor surface to ensure the reliability of the connection, to prevent virtual connection, heat generation and poor contact.The cage spring is made of nickel-chromium alloy steel with strong toughness.The conductor is made of tin-plated.
- 【Easy to Use】: Don't need any tools to connect wires, just using your hands. 1. Put the handle board to 90° 2. Strip the wire about 10mm 3. Put down the handle 4. Wiring is complete..
- 【Easy to detect】:In the transparent version, you can see the connection of the wires and confirm whether the wires are fully inserted in....
Check StockMontague OVEN THERMOCOUPLE 48\ 1036-7
- K-type thermocouple connector with real chromel alumel contacts.
- Miniature or mini k-type connector dimensions.
- Works with all k-type thermocouple wires and extension wires.
- Set of 10 male mini thermocouple connector plugs.
- Compatible with thermocouple plugs from other manufacturers.
Check StockRound Gas Range Oven Ignitor for GE 41-208 ER4342528 SGR401 SGR400
- ...the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
- Description:Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn’t ignite the burner tube..
Check StockDeutsch DTM 3-Pin Pigtail Kit, 20AWG GPT Wires (Made in USA)
- All Deutsch connector parts made by TE Connectivity.
- Wires and Contacts processed by Automated Machine with quality control.
- OEM quality pigtail with 8.5" long wires (including the crimped contact). Please use step up or step down butt connector for different wire size applications.
- SAE J1128, SAE J378 CERTIFIED Professional Grade Wires Made by East Penn Deka.
Check StockGas Oven Bake & Broil Round Igniter for WB2X9154 4342528 Ignitor AP2014008, PS243425
- ...the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
- Description:Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn’t ignite the burner tube..
Check StockSatelliteSale UL-Listed High Strength Copper Grounding Split Bolt Connectors Size #8, Pack of 10 Pieces
- SatelliteSale UL-Listed High Strength Copper Grounding Split Bolt Connector links two or more copper wires together without crimping or additional tools. It ensures high mechanical strength, maximum conductivity, and low resistance..
- Our Grounding Split Bolt Connector is made of top-grade, high copper alloy and highly resistant to oxidation, making them perfect even for severe weather conditions..
- It is commonly used with copper and other conductors, grounding, and bonding applications. The grounding split bolt connector Size #8 handles a wide range of wires, starting from 8 AWG to 16 AWG..
- Our high-grade copper connectors are UL-approved for copper and copper-weld stranded wires..
- It comes in a pack of 10 pieces, and all SatelliteSale products are ensured with an unbeatable lifetime warranty!.
Check StockDeutsch DT 2-pin Pigtail Kit, 14AWG Pure Copper GPT Wire (Made in USA)
- 100% Made in USA, assembled by Parts Universe.
- 100% GENUINE DEUTSCH CONNECTOR PARTS( by TE Connectivity).
- Wires and Contacts processed by Automated Machine with quality control.
- OEM quality pigtail with 8.5" long wires (including the crimped contact). Please use step up or step down butt connector for different wire size applications, waterproof for immersion under 3 feet of water.
- SAE J1128, SAE J378 CERTIFIED Professional Grade Wires.
Check Stock
RGB LED Light Strip Connectors 20 Waterproof LED Adapter Connectors Transparent Solderless LED Light Strip Connectors for Strip Light Unwired Gapless Track Lighting Connector 5V 12V 24V (4 Pin, 10 mm)
- Main Function: this 4 pin connector can be applied for 10 mm/ 0.4 inches RGB LED strips and 22 AWG 4 pin wires, solid wires and multi core wires.
- Tip: not applicable to 8 mm/ 0.31 inches LED strips.
- Please use a standard 22 AWG wire for connection.
- There are some unqualified wires on the market that may result in unsuccessful connection.
- When the connection is unsuccessful, please observe whether the clip connection contacts are in contact with the copper core of the wire.
- Simple Operation: insert the LED light bar light wire into the guide slot, check whether the positive and negative poles are correct, then press the cover down, and align the surface pad of the light bar with the pin on the track lighting connector.
- Operating Principle: the metal pin on the solderless gapless LED adapter connectors pierces the copper contact on the light strip, even slight swings and pulls can ensure a firm connection.
- Unqualified wires may include: there are too few copper cores to connect accurately.
- The copper core is off center and cannot conduct current.
- If the wire is qualified but the connection is still unsuccessful, you can re cut a piece of wire and try to connect.
- The Reason for Choosing Our Connector: made of quality PC material, our LED connector is sturd....
Check StockCAMWAY 140pcs Lever Quick Connectors for Wire,Pack Conductor Compact Connection Terminal Wire Connectors Assortment 4 Models Nuts PCT-212 50pcs PCT-213 40pcs PCT-214 30pcs PCT-215 20pcs
- 4 Different Models (2 port, 3 port, 4 port, 5 port). Wire Connectors Lever Quick Nuts Assortment Pack Can Connect any Combination of Solid, Stranded,....
- Test Hole on the Top of the Wire Quick Nuts Lever Connector is Designed to Check Whether the Wires with Electricity. All Kinds of Standard Test Probes....
- The Wire Quick Nut Connectors have a Strong Pulling Force, Wires will not come Loose when Plug the Wire in the Connector. The Wire Lever Quick....
- Made of High Quality PC Insulating Material, Wire Lever Quick Connector Housing Corrosion Resistance, High-temperature Resistance and Aging....
- No Need any Tools to Connect Wires, Push the Orange Levers to 90°and Plug the Wires and Put the Clip Back.No Need to Worry About Twist Between the....
Check Stock
3M Scotchlok Moisture Guard Weatherproof, UV-Resistant Connector for 2-3 Wires, 16-14 AWG (solid/stranded), 25 per bag
- 【Safe and Reliable】Rated Voltage: 250V/4KV.
- Rated Current: 32A. Glutoad lever wire connectors selected high quality flame-retardant insulating material, no corrosion, anti-aging, resistance high temperature, against electrical shock and long service life. Internal shrapnel copper material, and better conductive properties..
- 【Time and Effort Saving】Glutoad lever electrical connectors can quickly connect and disconnect wires. If you want to replace wires, only need to pull up the orange levers, pull out the unneeded wires and replace them. There is a test hole in every Glutoad electrical wire connector surface, it can be used to check whether the wires have electricity or not..
- 【Space Saving】Glutoad lever terminal connectors are compact, simple, reliable and reusable. When you combine the wires, you don't need to worry about twisting between the wires..
- 【Easy to Use】First, strip the wire according to 0.35-0.47inch, then push the orange lever up to 90° and push in the wires, last push the lever down. When the wire is inserted into the Glutoad wire splice connector and locked, the wires will not come loose..
- 【Widely Used】Glutoad wiring connectors kit can meet your different demands because they have 3 different conductors (2 3 5 Port). T....
Check StockParts Universe Deutsch DT 2-Pin Flange Pigtail Kit, 14AWG Pure Copper GPT Wires (Made in USA)
- 100% Made in USA, assembled by Parts Universe.
- All Deutsch connector parts made by TE Connectivity.
- Wires and Contacts processed by Automated Machine with quality control.
- OEM quality pigtail with 8.5" long wires (including the crimped contact). Please use step up or step down butt connector for different wire size applications.
- SAE J1128, SAE J378 CERTIFIED Professional Grade Wires Made by East Penn Deka.
Check Stock
50 Pcs Lever Connectors Nuts 4 Conductor Combination Compact Wire Connectors Fast Connection Terminal 28-12 AWG Suitable for Multiple Types
- 【UL Listed】 Long life, no corrosion, aging resistance, pressure resistance, high temperature and normal work. There is a test hole on the back of the connector. Test holes can be used to check if the wires are energized..
- 【Efficient】 No tools required in use, one plug can be used, greatly reducing the wiring work time. In fact, for home decoration, after the vertical connection terminal technology, each wire connection will save the wire length of about 500px , saving more than 80% of working hours, the comprehensive cost is greatly reduced..
- 【Universal compatibility】 Suitable for soft and hard single-strand and multi-strand. Widely used in lightings, fans, automatic doors and all small appliances..
- 【Practical】 The lever is a reusable and innovative connector. If you need to replace other wires, simply pull up on the small levers, pull out what you need and replace them. The XHF lever features a special scientific design that saves space. When you combine wires, you don't need to worry about the distortion between the wires. The XHF cable connector will help you create a clean and beautiful house..
- 【Convenience】 You can connect wires without any tools with your hands. Push the orange handle to 90° and plug in the wire (peel the wire ....
Check Stock
