Categories

Best Consistent Combustion

Zeda New BT Super Sport Complete 100cc Motorized Bicycle Engine Kit - 44 Tooth - Gas Powered Bike

  • Improved single piece cylinder head with open transfer ports for cooler operation, more consistent output, and increased longevity.
  • Limited edition high end metallic enamel coating protects your engine and looks sleek and clean.
  • Large 40mm exhaust port, larger Allen bolts, premium hybrid exhaust gasket.
  • 100cc BT engine (78.6cc actual), 3 HP+ - Average Power.
  • Increased spark plug angle for more complete combustion.
Check Stock

Weiler 34276 CrossFlex Heavy Duty Bore Brush 4 Diameter 240SC Grit

  • Desired Finish - CrossFlex offers a wide range of grits and sizes allowing machinists to achieve the desired finish.
  • Heavy Burr Removal - Increased brush to part contact ensures that the heaviest burrs will be removed, outperforming standard nylon tube brushes.
  • Long Life - CrossFlex brushes have a long operational life, lowering total cost of use compared to other brush options.
  • Flexible Nylon Stems - Distribute pressure evenly and self centers within the part to create an ideal hone..
  • Consistent Cross Hatch Pattern - Helps to seat piston rings and retains oil for lubrication in a combustion cylinder..
Check Stock

Turbonator Dual Fan,64mm/2.5in Intake Turbo Fan Diameter Aluminum Alloy + Rubber Car Air Intake Turbonator Dual Fan Turbine Supercharger Gas Fuel Saver Turbo (Red)

  • FEATURES: Increase the intake air volume of the combustion chamber by the turbofan, improve the combustion efficiency of the combustion chamber gas and thus enhance the horsepower..
  • WORKING PRINCIPLE: ABS new material fan blade draws air into the combustion chamber at a higher rate, Improve the atomization degree of the combustion chamber, increased horsepower and gasoline savings..
  • MATERIAL: ABS new material fan blade+Aluminum alloy pipe. ABS material is corrosion resistant, heat resistant, high hardness and does not produce metal debris entering the combustion chamber. Aluminum alloy pipes are corrosion resistant, durable and lighter in weight..
  • INSTALLATION POSITION：The turbine is installed in the intake hose of the engine, and the best position is 10cm-30cm / 3.94 "- 11.8" before the throttle valve. Note: suitable for car models with inlet pipe diameter greater than 2.5 inches..
  • PACKAGE and SIZE : 1 x Intake Fan,3 x Rubber Loop,Intake turbine size: 7.5cm x 6.5cm/ 2.9inch x 2.5inch..
Check Stock

BLUEFIRE HZ-8388B Self Igniting 3' Hose Gas Welding Torch, Swirl Flame, Fuel by MAPP/MAP Pro/Propane (Torch)

  • 3' long hose provides enough range for working around, the included handy clip helps to hang the gas cylinder to any convenient places, gives you more move freedoms and working safety.
  • Brass constructed burning tube and combustion system are specially designed to provide powerful swirl flame, resists flame blowout and reduces brazing time by 30%..
  • Ergonomically designed handle installed with build-in trigger start system to make it super easy to ignite the flame..
  • Brass constructed threading regulator assure durability and reliability, pressure regulated for consistent performance even when tiled or momentarily inverted. adjustable flame control knob can easily sized flame for different applications.
  • Made in Taiwan, , with the highest quality control..
Check Stock

TPI 716N, Flue Gas/Combustion Analyzer, 1 pc

  • 16 ounces / 474 ml (good for 16 tests in Block Tester brand combustion leak tester).
  • Use in Block Tester brand combustion leak tester or other fluid-based leak testers.
  • Works with GAS or DIESEL engines as well as propane, CNG, and other alternative fuels.
  • When fluid turns from BLUE to YELLOW combustion leak is present.
Check Stock

Englander Pellet Combustion Motor w Gasket PU-076002B

  • 【Compatibility】➤ Replacement PU-076002B Combustion Exhaust Blower Fan for Englander Pellet Stove 10-CDV, 25-CAB80, 25-CB120, 25-CBEP, 25-CBPAH, 25-EP & 25-EPI (Evolution Pellet), 25-IP (Imperial Pellet), 25-PAF, 25-PAH (Pellet Auxiliary Heater), 25-PDV, 25-PDVC, 25-PDVE, 25-PDVP, 25-PFS, 25-PFSP, 25-PI, 25-SSP01, 49-SHC22, 49-TRC22 Models..
  • 【Compatibility】➤ Replacement PU-076002B Combustion Exhaust Blower Fan for Englander Pellet Stove 55-SHP10, 55-SHP10L, 55-SHP15, 55-SHP20, 55-SHP22, 55-SHP22E, 55-SHP25, 55-SHPAH, 55-SHPCAB80, 55-SHPCB120, 55-SHPCBEP, 55-SHPCBPAH, 55-SHPEP, 55-SHPEPI, 55-SHPIP, 55-SHSSP01, 55-TRP10, 55-TRP15, 55-TRP20, 55-TRP22, 55-TRP25, 55-TRPAH, 55-TRPCAB80, 55-TRPCB120, 55-TRPCBEP, 55-TRPCBPAH, 55-TRPEP, 55-TRPEPI, 55-TRPIP, 55-TRSSP01 Models..
  • 【The PU-076002B Exhaust Blower Motor Technical Specifications】★Volts: 115, ★Cycles: 60 Hz, ★Amps: 0.28, ★RPM: 3000. 【High Quality Bearing Motor】UL Certified, Powerful, Quiet, Energy Efficient and Long Lasting. 1 year warranty..
  • The Criditpid PU-076002B combustion exhaust blower delivers a steady stream of forced air (negative draft) through the stove in order to keep the flame burning, while allowing you to set your heat range to your desired comfort level..
Check Stock

Block Tester BT-500 Combustion Leak Test Kit - Made in USA

  • Complete Combustion Leak Test Kit - Includes Fluid - Nothing More to Buy.
  • When Fluid Turns From BLUE to YELLOW Combustion Leak is Present.
  • Tests in seconds for combustion leaks caused by: Blown Head Gasket (BHG) Cracked Head or Block Pulled Bolts or Studs Warped Sealing Surfaces.
  • Quality Tool Made in USA for over 45 years with Limited Lifetime Warranty.
Check Stock

SunStar Heating Products Garage Tube Heater - NG, 45,000 BTU, Model Number SIR45-15-N

  • Compact size: overall length is 110in for ease of installation.
  • Vacuum System pulls combustion products through the combustion chamber for greater safety, virtually eliminating the possibility of combustion gases leaking into the heated space.
Check Stock

SunStar Heating Products Garage Tube Heater - LP, 45,000 BTU, Model Number SIR45-15-L

  • Compact size: overall length is 110in for ease of installation.
  • Vacuum System pulls combustion products through the combustion chamber for greater safety, virtually eliminating the possibility of combustion gases leaking into the heated space.
Check Stock

SunStar Heating Products Garage Tube Heater - NG, 35,000 BTU, Model Number SIR35-15-N

  • Compact size: overall length is 110in for ease of installation.
  • Vacuum System pulls combustion products through the combustion chamber for greater safety, virtually eliminating the possibility of combustion gases leaking into the heated space.
Check Stock

WXJ Stainless Steel Incinerator with Chimney, Portable Garden Incinerator Burning Barrel with Fire Hook, Cleaning The Backyard, Paper and Leaves, 31x31x57cm(12.2x12.2x22.4inch)

  • Professional-grade incinerator: The garbage incinerator is made of professional-grade high-temperature resistant stainless steel, which can withstand high temperatures of 890°C, does not deform, is not easy to wear, and has a long service life..
  • Full combustion: There is an air grill in the combustion furnace, which can maintain ventilation up and down to ensure full internal combustion, and faster combustion speed will not take up more time for you..
  • The smoke exhaust effect is good: the small chimney design makes the trash can have a better experience, especially when you burn the smoke and dust larger garbage, this incinerator is very professional, and the smoke exhaust effect is very good..
  • Humanized design: the incinerator barrel adopts an open-door design. When you are burning garbage, you can directly open the door and put it in it is very convenient and simple..
  • Adjustable temperature: the incinerator is designed with a damper, you can control the combustion speed and the size of the fire inside the incinerator at any time, which is very convenient..
Check Stock

Boloda 3 Pack Heat Tent Shield,Stainless Steel Grill Heat Plate Replacement for Charbroil 463240904,Coleman 461230403,Kirkland 463230703 Thermos 461246804,Centro G40200 Flame Tamer Heat Plate Shield

  • [Product Basic Information]:Grill Heat Plate size: 15 inch x 4 3/16 inch ➤Comes with 3 pack of heat plate in total. ➤We will wrap up well before....
  • [Well Fit for Aussie Models Gas Grill]: Charbroil: 463240804, 463240904, 463241704, 463241804, 463247004, 463247504, 463251505, 463251605, 463252005,....
  • [Stainless Steel Material]:Our heat plate shields are make of high-duty stainless steel construction, well-engineered and built to last, make them....
  • [Homogeneous combustion]:Grill burner covers can be enough combustion, has homogeneous flame temperature, which means you can cooked better, the smoke....
Check Stock

BLUEFIRE HZ-8394 Trigger Start 3' Hose Gas Welding Torch, Replaceable Super Swirl Flame Turbo Tip Blowtorch, Fuel by MAPP, MAP Pro, Propane

  • 3' long hose provides enough range for working around, the included handy clip helps to hang the gas cylinder to any convenient places, gives you more move freedoms and working safety.
  • Patented Super Swirl flame tip and combustion system are specially designed to provide powerful turbo cyclone flame, resists flame blowout and reduces brazing time by 30%. Improve capacity to burn medium to relatively large copper or other metal pipes.
  • Ergonomically designed handle installed with build-in trigger start system to make it super easy to ignite the flame.
  • Brass constructed threading regulator assure durability and reliability, pressure regulated for consistent performance even when tiled or momentarily inverted. adjustable flame control knob can easily sized flame for different applications.
  • Made in Taiwan, with the highest quality control..
Check Stock