Happybuy 10''/255MM Diamond Core Drilling Machine 4450W Wet Dry Diamond Core Drill Rig for Concrete Drilling Boring (Drill Bit Dia:4.25\/108MM)

  • 10 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4450W copper motor. Maximum Speed: 580RPM. Maximum Coring Diameter: 10"/255 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

COMOWARE Hammer Drills for Concrete, 1/2 In. Corded Drill, Hammer Drill, Variable Speed 0-3000RPM, Max 48000BPM, Hammer & Drill 2-in-1 Concrete Drill, 6.5 Amp Power Hammer Drills with 10 Masonry Bits

  • 1/2 IN. KEYED METAL CHUCK - This concrete drill is equipped with sturdy and durable metal chuck. The 1/2 in. three-jaw keyed chuck provides more secure bit grip than ordinary plastic keyless chuck. It helps the impact drill deliver stable drilling performance in rugged applications..
  • LIGHTWEIGHT & ROBUST CONSTRUCTION - The hammer drill weighs only 3.3 lbs for reduced fatigue and easy operation. Ball-and-roller bearing construction delivers smooth power transmission and extended tool life. This power hammer drill also comes with a handy 360° locking auxiliary handle and a built-in, quick-release depth gauge for precise drilling performance..
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ...drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills.
Check Stock

IRWIN 1890770 Flexible Installer Drill Bit with Screw Tip, 9/16-Inch Shank, 36-Inch Length

  • Screw tip with aggressive pitch delivers easy starts and fast drilling Show as "Type B" tip icon on packaging.
  • Hole in flute for easy wire pulling through walls, ceilings and floors.
  • 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling.
  • Tapered flute for faster chip ejection, less binding and smoother drilling Does not apply to 1/4" diameter SKUs.
  • Premium high carbon steel construction for extended drilling life in wood.
Check Stock

IRWIN 1890771 Flexible Installer Drill Bit with Screw Tip, 3/4-Inch Shank, 36-Inch Length

  • Screw tip with aggressive pitch delivers easy starts and fast drilling Show as "Type B" tip icon on packaging.
  • Hole in flute for easy wire pulling through walls, ceilings and floors.
  • 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling.
  • Tapered flute for faster chip ejection, less binding and smoother drilling Does not apply to 1/4" diameter SKUs.
  • Premium high carbon steel construction for extended drilling life in wood.
Check Stock

3 in 1 Pocket Hole Jig Kit with Wood Dowel Punch Locator, Woodworking Doweling Jig Set with 8 10 15mm Drill Bit, Adjustable Woodworking Drilling Locator Puncher Tools

  • ...ocator, improve the accuracy of drilling.
  • High-Quality Material: The 3 in 1 adjustable woodworking drilling locator puncher tool is precision-machined from high-quality aluminum alloy, which is stable and corrosion-resistant. Anodized finish and hardened steel center block construction is durable, large steel clamp screws tighten tools like a vice, and a sturdy aluminum surface holds your product securely for extended use.
  • Complete Set: 3-in-1 drill guide punch locator tool is equipped with 8mm and 10mm drill bits, and 1 x 15mm hole saw to meet your needs for different hole diameters. Built-in self-tightening clamps allow you to hold wood for drilling.
  • DIY Preferred Tool: 3 in 1 locator punch tool is perfect as a DIY woodworking tool kit, mainly for furniture and woodworking.
Check Stock

480W Electric Bench Top Drill Press Bench Drill Drilling Machine Electric Mini Drill Press Stand for Metals, Wood, Plastic, Aluminum Plate (480W)

  • 【Product Parameter】This is electric bench drill press machine, rated power: 480w, rated current: 0.55a, table size: 17 cm x 17cm, drilling diameter: 1-10mm, max spindle travel: 40mm. The spindle is about 110mm away from the drill bit center..
  • 【Long Life】480-watt motor construction adopts imported bearings, high temperature, and full copper wire processing, shell adopts nylon plastic processing. Which extends the life of the machine..
  • 【High Quality】Bench drill drilling machine with high quality drilling, easy operation, good stability. Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency..
  • 【High Efficiency】The motor has increased power, which is to increase the life of the motor. High-power miniature portable bench drill precision drilling machine motor. No-load speed:i: 0-5000r/min, ii:0-11000r/min. Drill capacity: woods:φ25mm, iron:φ7mm..
  • 【Wide Application】Bench top drill press is suitable for drilling, expanding and reaming operations on metals and other materials. It can be widely used in a single-piece or mass-produced instrument industry, machinery manufacturing, and repair parts..
Check Stock

VEVOR Core Drill Machine 305MM/12 Inches Core Drill Rig 4800W Powerful Rugged Diamond Concrete Core Drill with Stand Tool Wet Dry Concrete Brick Block Drilling (Drill Bit Diameter: 4'/100MM)

  • 12 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4800W copper motor. Maximum Speed: 500RPM. Maximum Coring Diameter: 12"/305 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

VEVOR Diamond Core Drill Rig, 1980W 6.3'/160 mm, 1600RPM Variable Speed Core Drill Rig with Stable Stand Base, Wet and Dry Drilling Machine for Hard Stone, Concrete, Marble, Granite, Brick

  • 6 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 2180W copper motor. Maximum Speed: 1600RPM. Maximum Coring Diameter: 6"/2160 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

Happybuy 8 Inch/205MM Diamond Core Drilling Machine 3980W Diamond Core Drill Rig with Stand and Drill Bits,Wet Dry Core Drill Rig for Diamond Concrete Drilling Boring (Drill Bit Diameter: 4.25'/108MM)

  • 8 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 3980W copper motor. Maximum Speed: 750RPM. Maximum Coring Diameter: 8"/205 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

Happybuy 6 Inch/160MM Diamond Core Drilling Machine 2180W Diamond Core Drill Rig with Stand and Drill Bits,Wet Dry Core Drill Rig for Diamond Concrete Drilling Boring (Drill Bit Diameter: 4.25'/108MM)

  • 6.3 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 2180W copper motor. Maximum Speed: 1600RPM. Maximum Coring Diameter: 6.3"/160 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

uxcell Square Hole Drill Bit, 1/2" High-Carbon Steel Hollow Chisel Mortise Power Tool for Woodworking

  • 【SIZE】1/2" (12.7mm) square chisel width, 75mm cutting depth, 205mm total length..
  • 【TIP AND EDGE】The best-designed drilling point tip and 4 cutting corners enable fast drilling with small opening resistance, and penetrating into working pieces of wood in precise opening size very smoothly and fast..
  • 【MATERIAL】Made of High-carbon steel, through heat processing, with high hardness (48-50 HRC) drill bits, and sharp-edged square chisel, durable and lasts long..
  • 【ADVANTAGE】With long drill core and square chisel, easy to lock the hole on the wood, can reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs..
  • 【OPERATION】Used with mortise and tenon machine with double effect, and electric drill, hammer and other tools is required for punching square hole in wood..
Check Stock

Greenfield Threading 330088 Metric High Speed Steel Jobber Drill Plug Hand Tap Set (18-Piece Set)

  • Features:003cbr003e 1:Complete hole drilling, tapping, deburring and countersinking in one operation with power impact tool.003cbr003e 2:Back tapered beyond tap to prevent thread damage from over-drilling.003cbr003e.
  • 3:Made from high-speed steel, these combination drill and tap bits are designed to tap up to 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
  • 4:A perfect countersink drill bit set, a perfect tap and die set, two in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • 5:High speed steel construction provides extra durability to drill bits to perform multiple drilling operations while maintaining its strength..
  • 6:Self-centering point, do not need assistant center drilling or center punching..
Check Stock