Categories

Best Consumables Welding

YESWELDER 49Pcs TIG Welding Torch Stubby Gas Lens #10 Pyrex Glass Cup Kit For WP-17/18/26

  • [SPECIFICATION] 49pieces TIG Torch Accessories (consumables)..
  • [APPLICATION] Region free and easy to use, can be used for WP-17 WP-18 WP-26 TIG Welding Torch..
  • [EXCELLENCE] With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel..
  • [NOTE] The insulating rings may not match the CK Torch..
Check Stock

RX WELD 55PCS TIG Welding Torch Stubby Gas Lens #10 Pyrex Glass Cup Kit For WP-17/18/26

  • 55pieces TIG Torch Accessories (consumables).
  • With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel..
  • Region free and easy to use, can be used for WP-17 WP-18 WP-26 TIG Welding Torch..
  • Its electric conductivity is most closed to 2% thoriated tungsten electrode at either AC or DC, and no need any welding program changes..
  • Applicable to Machine such as Rilon, Riland, Jasic, Mitech, Chiry, UNT, Krypton, Longetivity, Berlan and so on..
Check Stock

11 Pcs Contact Nozzle Tip Holder,15AK MIG Welding Torch Nozzle Contact Tips Holder Kit

  • Important accessories at the front end of the welding torch.
  • Made of high quality metal and zinc plated copper material.
  • nozzles, contact tips, and tip holders, you can use this 15AK Torch Contact Tip Set for welding.
  • Specially used for 15AK welding torch gun.
  • 11pcs of consumables that you may use for a while.
Check Stock

RX WELD 57PCS TIG Welding Torch Stubby Gas Lens #12 Pyrex Glass Cup Kit For WP-17/18/26 (Large)

  • 57pieces TIG Torch Accessories (consumables) with #12 Pyrex Cups.
  • With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel..
  • Region free and easy to use, can be used for WP-17 WP-18 WP-26 TIG Welding Torch..
  • Its electric conductivity is most closed to 2% thoriated tungsten electrode at either AC or DC, and no need any welding program changes..
  • Applicable to Machine such as Rilon, Riland, Jasic, Mitech, Chiry, UNT, Krypton, Longetivity, Berlan and so on..
Check Stock

WeldingCity 100-amp 9-ft Air-cooled MIG Welding Gun Replacement Torch Stinger for Clarke Welder 130EN 180EN 140T

  • Premium quality 100-amp with 6-ft and 9-ft cable air cooled MIG welding gun, ideal replacement for Clark 130EN, 180EN and 140T. Reference Clark P/N: WE23000037..
  • With trigger direct plug, gas line and power cable lug terminal designed for easy replacement to many Clarke or Shark welders 85EN, 130EN, 180EN, 140T etc. with Tweco style torch. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING..
  • Front consumables comes with Tweco style 11-35 (0.035") contact tip, 21-50 nozzle and 35-50 gas diffuser. Current rating: 100-amp..
  • Small, lightweight gun that's great for most home, farm and small shop projects, auto-body work and light maintenance or repair applications..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity 100-amp 6-ft Air-cooled MIG Welding Gun Replacement Torch Stinger for Clarke Welder 130EN 180EN 140T

  • Premium quality 100-amp with 6-ft and 9-ft cable air cooled MIG welding gun, ideal replacement for Clark 130EN, 180EN and 140T. Reference Clark P/N: WE23000037..
  • With trigger direct plug, gas line and power cable lug terminal designed for easy replacement to many Clarke or Shark welders 85EN, 130EN, 180EN, 140T etc. with Tweco style torch. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING..
  • Front consumables comes with Tweco style 11-35 (0.035") contact tip, 21-50 nozzle and 35-50 gas diffuser. Current rating: 100-amp..
  • Small, lightweight gun that's great for most home, farm and small shop projects, auto-body work and light maintenance or repair applications..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

RX WELD 28pcs/set New Pyrex TIG Welding Torch Gas Lens #4#5#6#7#8 Pyrex Cup Kit for Tig WP-17/18/26 Torch Welding Accessories

  • 28pieces TIG Torch Accessories (consumables).
  • With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel..
  • Region free and easy to use, can be used for WP-17 WP-18 WP-26 TIG Welding Torch..
  • Its electric conductivity is most closed to 2% thoriated tungsten electrode at either AC or DC, and no need any welding program changes..
  • Applicable to Machine such as Rilon, Riland, Jasic, Mitech, Chiry, UNT, Krypton, Longetivity, Berlan and so on..
Check Stock

Mig Welder Machine Inverter Gas Gasless RBM1500 Mig Stick Tig 4 in 1 Flux Core 220V Supports 2LB Wire Automatic Feed for Beginner

  • [Multiprocess MIG Welding] gasless(flux core wire) and gas(solid wire) welding :supports 2lbs .030’’ or .040’’ wire to weld over .030’’ thickness carbon steel stainless steel/mild steel..
  • [Stick Welding] switch to “MMA” on the panel and adjust the current as needed,welding well with 3.2mm rod 7018 1/8″, 6013 and 7018 3/32″as well.
  • [Generator Supported] this welder works well with a generator,but we suggest a 5000W above generator【30A breaker suggested for 220V】.
  • [Warranty] buy this welder with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.Click on the add to cart button now!.
  • Packing List : 1X dual Mig150,1X earth clamp,1X electrode holder,1X welding torch,1X 2lbs flux cored wire,1X welding hose.
Check Stock

PrimeWeld MIG180 Mig Welder, 180 Amp Wire Feed Welding Machine With Dual Voltage 220v, 110v

  • Multiple Features - This welder machine has dual 120/240 volts input and can be used as a DC stick welder (MMA), flux core welder (FCAW) and of course a MIG welder (GMAW). The Mig180 comes ready to use right out of the box! Drive Rollers for MIG and Flux are Included. This machine Also takes standard Tweco Consumables..
  • PrimeWeld's Promise - If for any reason you're not satisfied with your MIG180 MIG Welder Machine, simply reach out to Customer Support and we'll make things right for you! All Employees, Parts and Customer service Is located in the USA!.
Check Stock

YESWELDER Mig Welding Gun Torch Stinger 15ft (4.5m) 250 Amp Replacement for Miller M-25 169598 fit Millermatic 212 & 252

  • Premium quality 250Amp replacement MIG gun stinger torch, 15-foot (4.5m) cable.
  • This gun is a direct replacement for the GA-20C, GA-21C, and M-25 169598 welding guns..
  • Use standard Miller front consumables uses the same 169 726 gas nozzle, the same 169 728 tip adapter, the same 169 729 nozzle adapter, and the same contact tips as the OEM Miller gun .030-.035(0.8-0.9MM) diameter welding wire.
  • This 15 ft long gun will handle.030-.045(0.8-1.2mm) diameter welding wire,It comes standard with a .035"(0.9mm) diameter tip in the welding gun,and one more .035 and .045 tips in the package.
  • It fits all of the following models: Millermatic 200, 210, 212, 250, 250X, 251, 252, and Vintage.
Check Stock

WeldingCity 100-amp 10-ft Air-cooled MIG Welding Gun Torch Stinger Replacement for Miller Millermatic MIGmatic M-Series M-100/M-10 (248282)

  • Premium quality 100-amp/150-amp/250-amp with 10-ft, 12-ft and 15-ft cable air cooled MIG welding gun, ideal replacement for Miller MIGmatic M-series. Control cable is with 2-pin Amphenol type terminal..
  • M-series MIG gun M-100/M-150/M-25/M-40 can be found in many Miller machines like Millermatic, DVI, Passport, Challenger, Pulser, Vintage or Hobart IronMan, etc. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING..
  • Referenced part number from Miller: 248282 (M-100/10-ft).
  • Front consumables come with 000068 (0.035") contact tip, 169715 (M-100/M-150) and 200258 (M-25) nozzle, 169716 (M-100/M-150) and 169728 (M-25) gas diffuser, 169729 (M-25) nozzle adapter and 194011 wire liner. Current rating: 100A, 150A and 250A.
  • Cable length: 10-ft, 12-ft and 15-ft. Control cable terminal: 2-pin Amphenol type..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • ... Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the plasma cutter will automatically power off. It can be connected to 110 or 220 volt outlets without tools and can be carried in the workshop or on the job site..
  • Package Content: 1×plasma cutter welder machine, 1×tig17V torch, 1×ag60 pilot arc cutting torch, 1×stick holder, 1×earth clamp, 1×conversion wire adapter, 1×2 meters gas hose, 1×2 meters air hose, 1×air regulator, 2×electrodes, 2×tips, 2×hose clamp, 1×npt1/4 air plug, 1×brass standard air plug..
Check Stock

WeldingCity MIG Welding Gun Accessory Kit .035 Contact Tip-Gas Nozzle-Gas Diffuser-Nozzle Adapter for Lincoln Magnum 200/250 and Tweco #2 180-250 Amp

  • Premium MIG welding gun accessory kit includes consumable parts of contact tips, gas nozzles, nozzle adapter and gas diffusers for use with Lincoln,....
  • Work with 180-250 Amp MIG welding gun such as Lincoln Magnum 200/250 series, Tweco #2 and other equivalent MIG guns..
  • Content in each accessory kit: Tweco style consumables.
  • 2-pcs slip-on gas nozzles 22-50 (1/2"), 2-pcs gas diffusers 52, 2-pcs nozzle adapter 32 and....
  • For welding wire size: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Please refer to all listed pictures for part compatibility..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock