Categories

Best Contactors Mcb Mccb Switchgear

Coleman - 40 Amp 1 Pole 24v Coil Replacement Contactor C140A

  • BUNDLE CONTENT: 5 ITEMS – Two (2) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
  • one (1) compatible Slotted Steel Zinc Plated....
  • CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp,....
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European....
Check Stock

Protactor 2 Pole 32 AMP Heavy Duty AC Contactor Replaces Virtually All Residential 2 Pole Models 30 Amps or Less

  • 32 FLA Amp Rating – 2 Pole – 24 Volt Coil – Replaces Most 2 Pole Contactors Rated at 20 Amps, 25 Amps, or 30 Amps on Air Conditioners and Heat Pumps.
  • Enclosed Contacts and Encapsulated 24 Volt Coil.
  • Heavy Lug Terminals and Push-Ons for High Voltage Connections.
  • Replaces Virtually All 2 Pole Contactors 32 Amps or Less Used by Carrier – Bryant – Payne, Rheem – Ruud – Weatherking, Lennox – Armstrong – Ducane, Trane – American Standard, York – Coleman – Evcon – Luxaire, Heil – Comfortmaker – Tempstar.
Check Stock

Macgregor Umpire s Inside Chest Protector Black 18.8 x 10 x 7

Check Stock

Collapsing Empires

  • Certificate of Authenticity (COA) Card from MCB.
  • Collectable Books are Bubble Wrapped & Boxed for Safe shipping.
Check Stock

Eaton/Cutler Hammer DS125H1 1 1/4 in. Plate Type Hub, For NEMA 3R Enclosures,

  • For MLO and MCB Loadcenters and CB Enclosures, CH8B150RF, CH8B200RF, General Duty, Heavy Duty, and Double Throw Safety Switches Through 100 Amp, for Use with RGDN and RFDN, NEMA 3R Enclosure.
  • Eaton-Cutler-Hammer-DS125H1-Plate-Rainproof.
Check Stock

\Emgo Street Handlebar - Wide Magna Bend - Black

  • 10mm gauge alloy / Internal diameter: 12mm.
  • Finish: black anodized alloy. Universal fitment.
  • Width: 690mm / overall pull: 110mm / centre section width: 150mm / grip & switchgear width: 230mm.
  • Compatible with many motorcycles assuming your existing handlebars are 22mm in diameter.
Check Stock

3M ScotchCode Wire Marker Tape Refill Roll SDR-1

  • Suitable for phase identification on large or smallgauge wire or cable and automotive applications.
  • Acrylic, pressuresensitive adhesive ensures firm adhesion.
  • Thin, conformable polyester film tape for marking all types of wires and cables including power, telecommunications and instrumentation.
  • Designed for easy identification of terminal blocks/strips, wire in panel boards or a piece of switchgear.
  • Compatible with 3M ScotchCode Tape Dispenser STD for convenient usage.
Check Stock

Electrodepot 40 Amp 12 Pole (4 Pole x 3) Normally Open, 110-120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with 8\ DIN Rail and 2 Number 10 Screws

  • BUNDLE CONTENT: 6 ITEMS – Three (3) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
  • one (1) compatible Slotted Steel Zinc Plated 35mm x 200mm DIN Rail and two (2) stainless steel truss head screws (#10, 1/2") for immediate home or industrial installation.
  • CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specificat....
Check Stock

Electrodepot 40 Amp 8 Pole (4 Pole x 2) Normally Open, 110/120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with DIN Rail, 35 x 150 mm and 2#10 Screws

  • BUNDLE CONTENT: 5 ITEMS – Two (2) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
  • one (1) compatible Slotted Steel Zinc Plated 35mm x 150mm DIN Rail and two (2) stainless steel truss head screws (#10, 1/2") for immediate home or industrial installation.
  • CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specificatio....
Check Stock

Goodman - 40 Amp 1 Pole 24v Coil Replacement Contactor C140A

  • n accordance with U.L. Bulletin No. 508 "Industrial Control Equipment", contactors meet specifications for devices up to 600 VAC..
  • Includes Lug, spade terminals, and covers..
Check Stock

Surge Guard 40100 Basic Automatic Transfer Switch - 50 Amp

  • Time delay at power up. Connection type: Screw terminals.
Check Stock

3M ScotchCode Wire Marker Tape Refill Roll SDR-0, Printed with "0" (Pack of 10)

  • Suitable for phase identification on large- or small-gauge wire or cable and automotive applications.
  • Acrylic, pressure-sensitive adhesive ensures firm adhesion.
  • Thin, conformable polyester film tape for marking all types of wires and cables including power, telecommunications and instrumentation.
  • Designed for easy identification of terminal blocks/strips, wire in panel boards or a piece of switchgear.
Check Stock

UCHIDA 1122-C-39 Marvy Extra Fine Tip Le Plume II Double Ender Marker Pen, Ash Grey

  • Suitable for phase identification on large or smallgauge wire or cable and automotive applications.
  • Acrylic, pressuresensitive adhesive ensures firm adhesion.
  • Thin, conformable polyester film tape for marking all types of wires and cables including power, telecommunications and instrumentation.
  • Designed for easy identification of terminal blocks/strips, wire in panel boards or a piece of switchgear.
  • Printed with consecutive numbers "30" through "39".
Check Stock